FIRST LOOK: CYBORG DNA30 : AND ITS GOING TO BE GIVEN AWAY








Here is the first look at the new Cyborg DNA30 by Fluidvapor.com .  The original DNA20 was a huge success and the 30w version looks even more epic.   The new telescopic body is a great upgrade.  This is one mod I will be purchasing the moment they go live.

Fluidvapor will be giving one of these away on Mod Envy this Saturday.  For more details check out http://www.modenvy.net.   

Also please check out Fluidvapor for more info on the mod and all your vaping needs.


WHERE: http://www.fluidvapor.com


LOW: INNOKIN ICLEAR 30B - DUAL COIL - FREE SHIPPING - $12.99



Innokin iClear30B


Here is a great deal on the new innokin iclear30B dual coil / bottom coil clearomizer.  These have just come out and are a fantastic vape.  Made of stainless steel - the fit and finish are wonderful.  The drip included is removable. From a USA seller and free shipping? A GREAT price!


THE HARD COPY:


The Innokin iClear 30B Bottom Dual Coil Tank is made of stainless steel, features a rotatable, removable drip tip and has a large 3ml capacity.


Package Contents:

1 x Innokin iClear 30B Tank
1 x Rotatable, removable drip tip

1 x 2.1 ohm Coil


WHERE: >>> HERE <<<

$12.99 + FREE SHIPPING


QUALITY REPLICATION : EH PRO OMEGA RBA - $20.99



EH PRO Omega Dripper
 
Here is a great deal on the 1 to 1 of the Omega Atomizer.   The Omega atomizer is prized for its build quality and of course the Omega symbol which is the symbol for ohms.   These look stunning!  I haven't seen these yet at the normal discount vendors - but eBay had them at a good price.


THE HARD COPY:

  • Adjustable Airflow (3mm hole, twist to adjust size)
  • Single or Dual Coil Configuration (3 holes in cap)
  • 22mm Diameter (fits flush on most mods)
  • Stainless Steel
  • Laser Engravings and Serialized
  • 2 Drip tips

WHERE:  >>> HERE <<<

$20.99

30AMP 18650's ON THE CHEAP - $6.99 EA



Efest 30amp 18650 Batteries

Here is a great deal on the Efest 1600mAh 30AMP 18650s.   These are great for general mods and mechanicals.   The 30amp limit will allow for low sub-ohm builds and your general high power needs.  One of the lowest prices I have seen for a 30amp battery in a while.
  • Size: 18650
  • Type: Li-Mn (High Drain)
  • Rated Capacity: 1600mAh
  • Nominal Voltage: 3.7V
  • Peak Voltage: 4.2V
  • Cut-off Voltage: 2.5V
  • Dimensions: 18.3mmX65mm
  • Rechargeable: Yes
  • Protected: No
  • Chemistry: Lithium manganese Dioxide (Li-Mn02)
  • Style: Flat Top
  • Rated Capacity: 1600mAh
  • Maximum Continuous Discharging Current: 30 A
  • Maximum Pulse Discharging Current: 60 A
  • Maximum Continuous Charging Current: 10 A
  • Maximum Rated Discharging Current: 30 A
  • Maximum Charge Voltage: 4.2±0.05 V

WHERE: >>> HERE <<<

$6.99

EPIC: MOD ENVY 1 YEAR ANNIVERSARY SHOW - NOW $7,000 IN GIVEAWAYS!





This Saturday the 25th will be an epic vaping show event.  Mod Envy will be having their one year anniversary show.  Over 40 vendors will be sponsoring the show with giveaways totaling over $7,000.00.   The biggest vaping show to ever air was Mod Envy's Phil Busardo interview with 1176 viewers.  We have a feeling this show will BLOW that number away and push us further into the record books.  Please join us for this one of a kind event.  Show starts at 10:00pm EST and ends - when it ends.  High end giveaways will be spread throughout the show, rather than saving them all till the end.  

The show will air on novabroadcasting.org and you can find more information about the show and giveaways on modenvy.net

 



 
MOD ENVY IS YOUR WEEKLY NATIONAL VAPE MEET


WHERE: >>> HERE <<<

 

FLASH SALE: MTBAKERVAPOR - 10% OFF



Flash Sale at Mtbakervapor

Mtbakervapor is having a flash sale.  All day today they will take 11.12% off your total purchase.  Their juice is already some of the lowest price around - so this is just some icing on the cake!

Buy your month(s) supply today and save big!

Some of my favorites are the Solar Flare, Lightning, Ecto Cooler, Hazelnut, Straight Tobacco.

WHERE:  >>> HERE <<<

THE DEAL:
USE COUPON CODE VAPORJOE TO TAKE 10% OFF YOUR ORDER

ZING: SPLASH ANODIZED GLASS CARTO TANKS - $10.42



Splash Anodized Cartomizer Tanks


Did you know the cartomizer is still the #1 selling ecig product? 

Splash anodized aluminum caps sit on either end of the glass tube, and you'll get a long drip tip to match. Ships with the carto, an extra carto and an extra set of o-rings as well.  These are set a pretty great price - other sites sell these for $25.00-$30.00 ea.

THE HARD COPY:
  • Anodized aluminum 510 drip tip
  • 6.0ml juice capacity
  • Pre-punched 510 cartomizer (2-hole)
  • Cartomizer length : 45mm (from flange to top)
  • Clear glass tank (3mm thickness)
  • Glass size: 37mm x 20.5mm x 14.5mm (L*OD*ID)
  • The bottom pin (where it screws into battery/mod) is NOT spring loaded 
  • 510 connection
  
WHERE:  >>> HERE <<< 
 
$10.42

BLOWOUT: AGA-T2 - $14.50 + FREE SHIPPING (USA)





Youde AGA-T2

 
GREAT DEAL FROM A USA VENDOR!

Here is a great deal on the AGA-T2.   One of the most popular rebuildables are now just $14.50.  If you were looking to get into rebuildables or wanted another - check out this deal!

THE HARD COPY:

The AGA-T2 is the best value genesis style atomizers currently available. Made from stainless steel and at its low price it offers the same user experience that compares to many higher priced units. This unit has several upgrades to its predecessor the AGA-T such as glass tank and o-ring fitted top cap so you can now align the air hole with ease.

Included with the AGA-T2 is a parts bag consisting of:


1 x Piece of Stainless Steel Mesh
1 x Resistance wire for Coil
2 x Extra O-Rings
1 x Extra Screw
1 x Extra Silicone O-Ring
1 x Extra Knurled Nut
1 x Pyrex Tank


WHERE: >>> HERE <<<

$14.50 + FREE SHIPPING 

REPLICATED ROLLOUT: THE VALKYRIE FALLS



The Valkyrie Mechanical Replica
Logo version (not being sold by this vendor)
Brushed Genesis version


The sexy Vicious Ant Valkyrie Hybrid mod has been replicated. They have no logos and it is very sleek, made of stainless steel. It has a adjustable airflow cap and accepts 18650 size battery. It is a hybrid dripper so you can't change the top. The button doesn't get hot or have problems! 

WHERE: >>> HERE <<<

PRICE DROP: STAINLESS NEMESIS MECHAINCAL REPLICA - $18.50



Stainless Nemesis Mechanical Replica


Attractive, hard-hitting, highly adjustable and easy to convert to a magnetic switch, these mechs are a total win. Now available here in two-tone with polished brass and lightly brushed stainless steel.

Features include an adjustable pin, airflow control, bottom locking button, silver plated contacts and the familiar etching of the original. Extension tubes allow the use of any 18-series battery. 


One of the hottest selling mechancials in the community. 

WHERE: >>> HERE <<<

$18.50

LIKE A TANK: THE INNOKIN ITASTE VTR - $69.99




Innokin Itaste VTR


USA VENDOR DEAL - JUST A FEW BUCKS OVER A GROUP BUY.

Ok so if you havent already bought a VTR, you should really think about it.  I have 80+ mods and the VTR is one of my favorites.  Its built EXTREMELY well, works like a dream, and I love the form factor. 


BASIC PARAMETER
 
    Dimension: 22.2 x 54.4 x106 mm
    Maximum Current Output: 5.0 Amperage
    Operating Voltage: 3.0V-6.0V
    Operating Wattage: 3.0W-15.0W
    Battery : IMR high drain 18650 ( without protection )


BRIEF FEATURES

    Variable Voltage: voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.
    Variable Wattage: Wattage can be adjusted from 3.0 – 15.0 W in .5 watts increments.
    Short Circuit Protection.
    RMS (root mean square)
    Reverse Battery Protection Circuit.
    Resistive Load Detection ( Ohms meter ).
    ON/OFF battery switch.
    LED Battery Power Display.
    Low Voltage Warning.
    Overtime Vaping Warning (10 second switch cutoff).
    Battery safety protection (Vent holes).
    High compatibility 510 connector:
    Will fit iClear 10, iClear 16, and iClear 30 clearomizers, as well as standard 510                



WHERE: >>> HERE <<<

$69.99

24 HOURS: 21,000,000 HITS - DAY OFF





Another 1,000,000 has ticked off the counter and this means a well needed day off for the Vaporjoe's network of sites.  The last week has been extremely busy with deals and news.    We have also opened a new Vaporjoes Network page on Facebook you might want to check out - A place for vapers to get non-deal related information and news on whats going on in the community.  

WHERE: >>> HERE <<<

Deals will resume tomorrow Sunday the 19th at Noon EST


(BACK IN STOCK) PORTABLE WATTAGE: ITASTE VV - V3 - $25.99





 
These are widely popular.  Every time I put these up - they sell out.  
I try to get them back on the blog the moment they come back in stock at this price.

The Itaste VV - V3 is basically a compact version of the MVP2.  A super portable design for those on the go or who don't want a large mod but want variable wattage. These are the smallest variable wattage devices on the market currently.  At this price, a bargin.

THE HARD COPY:


iTaste VV v3.0 Quick Details

  • Size: 15mm x 15mm x 108.5mm
  • Available Colors: White, Black, Chameleon
  • Battery Capacity: 800 mAh
  • Charge Time: 1.5 Hours
     
iTaste VV v3.0 Features

  • The iTaste VV v3.0 is a microprocessor controlled variable voltage/variable wattage (vv/vw) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses.
  • 510 and eGo Threads.
  • Variable Voltage
  • Variable Wattage
  • Resistance (ohm) Meter
  • Puff Counter
  • Short Circuit Protection
  • Over Discharge Protection
  • Remaining Battery Voltage Display
  • On/Off Power Switch
  • 10-second Cutoff
  • Passthrough Feature (gives you the ability to use the device while charging)
  • Remembers last voltage or wattage setting when switching batteries.
  • LED Display

WHERE: >>> HERE <<<

$25.99

GOT IT RIGHT: 22MM PATRIOT RDA - $6.07



22MM PATRIOT RBA

THE HARD COPY:

Some of the most attractive replica drippers we've seen, those dubbed "Chi-Triots" are inspired by the popular Patriot Dripper. This one is constructed of stainless steel and features a deep drip well with a three post configuration ideal for thirsty dual coil builds. Holes through the posts and phillips screws mean it's an easy build and won't have you hunting for allen keys. Drip tip is included.

So what's special about this one?
The first ones to come out were only 20mm..... this one is a full 22mm!! 

  • Dripping Atomizer
  • Stainless steel 510 drip tip
  • Single air hole located on top cap
  • Chromed brass internal posts
  • Triple-post system for single/dual coil build
  • Double o-ring seals on base
  • Height without drip tip: 32mm / 1.26" (Approx.)

WHERE: >>> HERE <<<

$6.07

BLOWOUT: SMOKTECH S.I.D. VARIABLE WATTAGE MOD - $25.77







Here we have the smoktech S.I.D.   A very popular variable wattage device and a very good price.  If you were in the market for a new VW tube mod and didnt want a VAMO or SVD - here is a great alternative and CRAZY price for a USA vendor.


THE HARD COPY:

  • Variable wattage - can be adjustable from 3.0W to 15.0W (0.5W increments)
  • Variable voltage - can be adjustable from 3.0V to 6.0V (0.1V increments)
  • One button with 7 menus
  • Maximum current output: 4A
  • Built in LED display showing menu, function and selection
  • Reverse polarity protection
  • 510/ eGo threading connector 
  • Can be powered by 1*18650 battery (battery sold separately)

WHERE: >>> HERE <<<

THE DEAL:
USE COUPON CODE MLK40 TO BRING THE TOTAL TO $25.77



RAISED THE PRICE THE MOMENT I POSTED THIS DEAL.


submit to reddit

BREAKING: 30+ WATTS - CHINA HAS IT AND ITS ONLY A SOFTWARE UPGRADE






co·in·ci·dence
kōˈinsədəns,-ˌdens/
noun: coincidence
1.
a remarkable concurrence of events or circumstances without apparent causal connection. 


THIS IS AN UPDATE: FROM OUR LAST POST HERE

Just 12 hours hours after breaking the news of China's 22W board we have learned new revelations. The 30 Watt capability is nothing more than a software upgrade to the chip.   They make a number of chips but the one im looking at is the DIY 20/25/30 Watt chip that looks pretty great.  Its also very customizable to the modders needs. 

As these first 30 watt Chinese chips get cloned by other companies the price will become INCREDIBLY low.  Also -  wattage limits will continue to rise quickly as more and more companies jump on the bandwagon requesting higher limits to have the next sound byte.

From the manufacturer:  (excuse the chinglish) 

Except below three products, we will have SX350 which power can be 30W. SX220D which design specially for DIY lovers( Screen and board will be separately, USB pinout and board will be separately, button can be separately from board ) Others like in the future, same board , you can download one software then can upgrade from 20W to 25w or 25W to 30W" 

If you get some requirements from your buyers, pls let me know. We will let their idea be reality. All the suggestion and comments"like touch fire button in winter...." I will take with boss Mr. Chen and their genius software&hardware team. Our Slogan is " Innovation for you". The products we design and produced must suitable to the consumer . so let's work together and service for more and more Vapor lovers. 


IN SHORT: ALL YOU NEED IS A SOFTWARE UPGRADE TO GET 30 WATTS 

MANUFACTURER: >>> HERE <<<

SHOCK AND AWE: THE CHI-NA 20 (DNA-20 REPLICA) - 30W COMING

UPDATE: OVER 20,000 VIEWS TO THIS POST IN UNDER 7 HOURS


The first mod housing already being made to hold the chip


co·in·ci·dence
kōˈinsədəns,-ˌdens/
noun: coincidence
1.
a remarkable concurrence of events or circumstances without apparent causal connection.



The day after we are all talking about a new 30 watt chip -  China now has a DNA20+ replica that can actually reach 22W.  There are some impressive features with this board.   This could be a very cheap alternative to the hungry masses looking for a DNA20+ experience .  This board is claiming to handle .5 ohm builds - so its actually superior to the original 20 watt board in many respects. 

22W sub-ohm capable mod boxes at super affordable prices?

With 22W already reached - how long will it take China to officially pass the 30w mark?  NOT LONG


Ready to Ship to mod makers


UPDATE TO THIS POST LOCATED HERE


THE $16.00 PROMETHEUS REPLICA




The Prometheus Replica


The Prometheus is made from stainless steel. This RBA Tank has three posts; one positive post and two negative posts, to give you your desired build style. The Prometheus features an adjustable copper 510 connection and adjustable air-flow ring that is lockable by the top cap. 


THE HARD COPY:

  • Genesis style RBA
  • Stainless steel 510 drip tip
  • Air flow control ring on upper body
  • Chromed brass center post
  • Stainless steel protective shield
  • Clear PMMA tank
  • Copper 510 contact pin (adjustable)

WHERE: >>> HERE <<<

$16.15