FOUND: SONY 30AMP BATTERIES - 3 FOR $24.99

These are starting to get impossible to find.  Its official.  Sony is no longer making the 30AMP line of batteries.  
The fact this reliable seller is selling them is a big find!   

Get on them!

THE HARD COPY:

    Flat top
    Nominal Capcity: 1600 mAh
    Rated Capaciity: 1500 mAh
    Nominal voltage: 3.7v
    Voltage after a fresh charge: 4.2 +/- .05v
    Do not discharge this battery below: 2.5v
    Maximum charge voltage: 4.25
    Continuous Maximum Charge Current: 10 amps
    Continuous Maximum Discharge Current: 30 amps
    Weight: 45.1g
    Allowable Enviroment Temperature for Charging: 0 to +45 degrees C
    Allowable Environment Temperature for Discharging: -20 to + 60 degrees C
    Recommended Charging Algorithm: CC-CV 4.20V +/- 0.005V, 1.5A, 2.5 hours


WHERE: >> HERE <<

$24.99 for 3

IN STOCK: THE ELEAF ISTICK - $35.99 FREE SHIPPING

This is an IN STOCK price - not a pre-order price.

I got my Istick the other day and I must say - its an amazing little mod.   Its ULTRA portable.  Smaller then the original vaporshark - this little mod lasts a long time and packs 20 watts of power. 

I was so impressed I bought 3 more. 

THE HARD COPY:

• 2200mAh Li-Ion Battery
• VV/VW – up to 20W and 3v – 5.5v
• OLED display
• 510-Threads
• Power on/off: Press the button for five times to turn the iStick on and off.
• 10-sec Protection: Maximum of 10 seconds per drag.
• Atomizer Short-Circuit Protection: If atomizer short-circuits, the OLED screen show “Atomizer Short”.
• Low-Voltage Protection: Once the battery is below 3.3V the OLED screen will show “Lock”, which means its time to recharge.
• Unlock the Low-voltage Protection: The iStick begins working again once it reaches 3.65V.
• Low power Alert: If the battery’s power is lower than 10%, the power symbol on the screen will flash.
• Atomizers from 1ohm to 3ohm capable
• Accurate Metering
• Pass-Thru vaping while charging
• Charged via micro usb

WHERE: >> HERE <<

$35.99 + FREE SHIPPING

ROLLOUT: THE SX MINI

Abraham from Vapepro Supply brought this out at VCCTN this weekend. One of the hottest mods I have seen a very long while. 

It has a "ZNA" shape but its nothing like one.  Called the SX Mini because of the new chip.  YiHi (The maker of the chip) is also the maker of this device.

These use a single 18650 battery and can push out around 100 watts in "powerful" mode.

This has so many bells and whistles I couldn't get through them all.  

Price point on these will be around $175.00 retail.   These should be live in next month or so.

I have a feeling these will be in very high demand.
 
 

 

ENTER THE DRAGON: THE SILVER DRAGON REPLICA - $16.79

The replica is constructed of stainless steel with silver-plated contacts. Tube is beautifully etched with a dragon design. Spring loaded, bottom firing switch is recessed, without lock mechanism.


THE HARD COPY:

• 510 threading connector
• Silver plated copper contacts
• Bottom spring loaded firing switch, without locking ring
• Houses single 18650 battery (batteries sold separately)
• Logo engravings

 

WHERE:  >> HERE <<

 

$16.79

 

 

GET REAL: THE CLT RDA BY INFINITE - $31.49

CLT RDA V2 by Infinite is the second RDA that is developed by Infinite. The CLT RDA V2 features double heat fins, a huge drip tip that will deliver vapor without restriction. Since the top cap is redesigned to accommodate the new large drip tip, therefore its bore can be extended beyond the maximum limit allowed for any standard wide bore drip tips. The CLT RDA V2 is constructed with 4 piece unit where the deck and posts are milled to the deck for maximum conductivity and rigidity. The negative posts have airflows coming in from the side to give you additional airflow to your negative coils. The position of the airflow is at higher on top of a deeper well deck so it will not leak from the side airflow. This RDA is definitely an Original & Affordable RDA, the vapor and flavor produced from this RDA is one of the best among even the high end RDAs!

Product Features:

• Made out of 304 Stainless Steel
• 22mm in Diameter so it will fit most of your mod Flush!
• Custom extreme wide bore drip tip measure at 10mm x 14mm
• Comes with two wide bore drip tips (Stainless Steel and Black Delrin)
• Full copper adjustable contact pin
• Heat Fins on top and bottom for maximum heating disbursement
• Negative posts are milled into the deck for maximum conductivity and rigidity
• Huge airflow slots on each side for maximum air delivery
• 2 additional airflow holes on each side of the negative posts to boost more airflow through the negative coils
• Huge juice well measures at 4mm deep!
• Positive posts are split for ease of build
• Conical Top cap for that dense and flavorful vape
• Standard 510 threaded connection
• Original & Affordable
• A Must Have For ALL Cloud and Flavor Chasers!

 
WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $31.49 

 

IMMINENT: ITS THE DNA40 BY EVOLV - VAPORSHARK AND HANA ARE FIRST

Its officially the DNA40 by Evolv.   This new chip will allow you to go to 40 watts and set how hot your vape will go in terms of temperature.   Today The Vaporjoes Network has learned the first salvo of mods using the new chip will be Vaporshark and Hana.   

This is an imminent release - they are IN PRODUCTION and will be out before Christmas.

I have some exclusive interviews in the coming weeks to talk about the chip and up coming mods.

DNA40 - Bank on it.

TODAY ONLY: 17% OFF EVERYTHING AT MFS

Myfreedomsmokes is having a one day 17% sale.    Through Sunday you will get 17% off our total order with the coupon given below.   They are one of the oldest online vendors in the community.

They are a true one stop shop when it comes to your vaping needs.   
Everything from DIY to Mods.


WHERE: >> HERE<<

USE COUPON CODE GET17OFF TO TAKE 17% OFF YOUR TOTAL ORDER

24 HOURS: 41,000,000 AND VCCTN

WE WILL ATTENDING VCCTN IN CHATTANOOGA TENESEE.  

This day off couldn't come at a better time.   
We have been pushing a million hits a WEEK.


Another million has ticked off the counter.  In the grand Vaporjoes tradition we take 24 hours off.   Deals will continue tomorrow starting at NOON.  Vendors and vapers will continue to post deals in our Facebook group. 

VERSION 3: THE ORCHID STYLE ATOMIZER - $15.84

The Orchid Style gets a facelift! Gone are the uneven lines-- the newest iteration of the Orchid Style has clean smooth lines and heat-dissipating fins on the cap. The easy to build deck with it's dual connection positive post remains, and we expect it to produce the great flavor the Orchids are known for.

THE HARD COPY:

• Removable 510 drip tip (w/ heat insulator)
• Quad-pole for dual coil build
• 4 wick channels
• 2 air holes
• 510 thread connection
• Brass 510 center pin (adjustable)
• Bottom screw-refill hole
• 22mm diameter
• Height without drip tip: 41.4mm

WHERE: >> HERE <<

$15.84

RESTOCK: 100% ORGANIC JAPANESE COTTON - 25 PCS - $7.00

There are a lot of Japanese cotton sellers out there and they run for about $5.00 for 5 to 10 pcs.  Today we have found a great deal that gives you up to 5x the amount for around the same price. 


THE HARD COPY:

• *No bleach, no pesticides, just pure nature's cotton.
• *This product is 100% Grown in Japan Organic Un Bleached without using any chemical fertilizers.
• *There are 4 thin layers in one sheet which makes its great for absorbing.
• *These pads are great for wick for rebuild-able atomizers
• *1 Pad will last you well over 1 week.

WHERE: >> HERE <<

$7.00 for 25 pcs

NOW IN COLORS: TANK THE MARKET - COIL JIGS - $3.05 - $4.05

Coil jigs are used to make clean rebuildable coils.  Normally sold for  $9 - $15 in the USA.
Now you can get one for as low as $3.05.

This merchant has officially tanked the market.

THE HARD COPY:

• The Coil Jig is a great accessory to own if you are a frequent user for RBA / RTA / RDA's
• Includes 5 different sized rods: 1.0mm + 1.6mm + 2.4mm + 3.2mm + 3.5mm
• The hole on the body can act as a stand for your atomizer as it is 510 threaded
• It's a simple tool that can assist in making your coils clean and efficient

WHERE: >> HERE <<

$3.05 - $4.02

EXACT REPLICA? 1:1 ZNA 30 REPLICA BY ROBBOT TECH - $89.90

 
An exact replica of the ZNA? 


THE HARD COPY:

They're calling it a true 1:1. Zen has listed this version as truly Z2 threaded, when he said the Comcig is Z2 threaded HERE. Comcig's version was made by Robbot Tech, and all future replicas will be from Robbot Tech. Any way you look at it, though, it's a beauty. Crafted from 316 Stainless steel; Z2 threaded to allow you to utilize Zen's own parts, tubes, and atomizers; contacts are silver-plated copper; will fire 0.3 to 3.0 ohms; utilizes the Cloupor DNA 30 V3 chip set. 

Want a more "Zen-like" experience? Check out what Zen is up to HERE.


WHERE: >> HERE <<

$89.90 - ships from USA

A DEAL YOU CAN'T REFUSE: JUICE MAFIA - $2.99 PER 10ML

Here is another great juice sale - this time from JuiceMafia.   The family has come together and agreed offer a big bottle sale.  If you have a favorite flavor - its time to load up and save!

I love their entire tobacco line like the peach, Turkish, and tropical tobaccos.  Smokie901 is also a huge fan and has done a number of reviews.  All very good.







WHERE:  >> HERE <<
$2.99 per 10ml

LOWEST: THE CHIPLUME REPLICA RDA ( 3 TYPES ) - $13.99 + FREE SHIPPING

YOUR CHOICE OF STAINLESS - COPPER - BLACK

SHIPS FROM THE USA FOR FREE

THE HARD COPY:

• Stainless steel construction
• Removable 510 drip tip
• Unique design with three separate sources for airflow:
• Air Slots in front of coil, with AFC
• Air holes through negative posts to bring air to back side of coil
• Air holes in top of cap to create a vacuum effect
• Negative posts are milled into the deck
• Deck is gold plated stainless steel
• Delrin insulator at drip tip (also serves as AFC for top air holes)
• Rotating "T" center post to accommodate a multitude of different builds
• Post holes size: approximately 1.7mm
• 22mm external diameter
• Height without drip tip: 29.5mm
• Laser engravings
• 510 threading connection

 

WHERE: >> HERE <<

 

$13.99 + FREE SHIPPING

 

UPGRADE: THE SQUAPE RELOADED - $24.05

Meet the latest incarnation of the Squape Styled atomizers! Modeled after the Squape Reloaded, this atomizer features an improved adjustable airflow and new styling. Tanks holds 5.2mls and does not need to be emptied to rebuild. Comes boxed with hex wrench, 2 extra decks in different designs spare o-rings, and spare screws.

THE HARD COPY:

• Removable drip tip
• The top of the tank has a tapered, stepped down design which adds a unique modern look
• Triangle shaped tank window cutouts
• Can be rebuilt without needing to drain the tank of e-liquid
• The atomizer deck is removable and there are three different atomizer deck options (standard, wide, curved), , allowing for limitless rebuild versatility
• Adjustable airflow control system. uses a spring-loaded ball bearing instead of o-rings to enable the control ring to be adjusted easily and it clicks into place for each airflow setting. There are six different airflow settings, ranging from 0.9 to 3.1mm in diameter, which allow for a highly-customizable vaping experience
• Engraved logo
• Diameter: 22mm
• Height without drip tip: 63mm
• 510 threading connection (adjustable center pin)

 

WHERE: >> HERE <<

 

$24.05

 

 

HIDE IN THE OPEN: THE CREE FLASHLIGHT WITH A 510 CONNECTION

This is one of those accessories I LOVE!

Turn your mod into a flashlight.   Not only is it extremely handy, but things like this show why its going to be EXTREMELY difficult to regulate our hardware.    Just pop a flashlight into the 510 connector and its NO LONGER an electronic cigarette - its just that simple.

I'm sure people will find even more useful reasons to use these.   


THE HARD COPY:

• Reflector diameter: 16mm
• Beam range: 100 meters
• Working voltage: 3.0-4.2V
• 280 Lumen
• 510 connection
• Cree style LED
• Works with mods and ego batteries

WHERE: >> HERE <<

$6.87

IN STOCK: THE SIGELEI 100 WATT BOX MOD - $94.99

Well here we are - The Sigelei 100watt box mod from a USA vendor at a great price!!

OUR ORIGINAL WRITE UP:

I've been saying for a while the new baby in the mod world is the regulated / unregulated box mod.   Tube mods are getting tiresome to look at. No matter how much cake decorating they put on a tube mod - in the end, its a tube!   Box mods are far more cheaper to build and far more aggressive in terms of what can be put inside. 

... and aggressive is good :)

China just dropped a nuke right in the middle of the regulated / box mod market.   If you don't think this mod at this price is going to shake things up - your deluding yourself.


THE HARD COPY:

    The SX-330 Chip
    OLED Screen• Adjustable Output Power From 7w - 100w (by 0.1w increments)
    Touch Sensor Fire Button
    Auto Ohm Resistance Meter (Finds ideal voltage for RBA/RDA)
    Accepts Coil Builds From 0.2ohm (Sub) - 3.0ohm
    Adjustable 510 Pin
    Output Current: 16Amps
    Output Voltage: 3.6v - 8.5v
    Input Voltage: 3.2v - 3.7v
    Runs on dual 18650 Batteries
    Low resistance Protection
    Output Short Circuit Protection
    Reverse Battery Protection
    Chargeable Via Micro USB Port


WHERE: >> HERE <<

$94.99

BACK IN STOCK: THE FUHATTAN IN COPPER - $39.55

The story behind this mod is HILARIOUS.  They have been selling out everywhere.  
Today I found them at a pretty good price with free shipping from the USA.

Standard Features:
 
The Manhattan measures almost 1in in diameter; standing 3 ¼ in tall
Thick wall design to add to the durability and electrical conductivity of the Mod
 A powerful “rare-earth” magnet button design with a built in fail safe to ensure this Mod cannot fail “On”.

This is only for mod device which includes one body, one top cap, and one bottom button.

Specs

• Copper Body
• Copper Top and Bottom Cap
• Copper Firing Button
• Copper Contacts
• Derlin Isolator

WHERE: >> HERE <<

$39.55