THE GOD MOD: 180 WATTS OF GODLINESS - $109.95





The updated version with the wolf rather then the cross graphic.

Now we found a very cheap source to actually get one.  This wattage behemoth uses 3 x 18650 batteries and hits a maximum output of a whopping 180 watts!    We thought $1.00 per watt was cheap, now we are looking at about 60 cents per watt.  


THE HARD COPY:
  • Capacity  Use 3 18650 batteries
    Input voltage 9.9v-12.6v
    Output voltage 1v-12.6v
    Size 119x69x30(mm)
    Color Red,blue,silver,orange,black
    Resistance 0.5-4ohms
    Wattage(PMW) 5-180w
    Material Aluminum
    Big currents protection Yes
    short circuit protection Yes
    Reverse battery protection Yes
    Low voltage protection Yes
    Low resistance protection Yes
    Temperature protection  Yes
 
WHERE: >> HERE <<


$109.95


TUGBOAT VERISON 2 REPLICA LANDS AT $8.96



http://goo.gl/uB8ihl


The Tugboat Styles are widely regarded as a great, simple, no nonsense atomizer. The version 2 brings a cleverly designed top cap with two parts to allow you to easily adjust your airflow without the need to grab a drill. Wide bore drip tip is included. Constructed of stainless steel.

THE HARD COPY:
  • Stainless steel 510 drip tip
  • 4 air holes or 2 air holes option
  • Deep juice well (approximately 3.6mm deep)
  • Tri-post design
  • Posts material: Chromed brass
  • 510 connection (chromed brass center pin)
  • 22mm external diameter
  • Height without drip tip: 29.5mm

WHERE: >> HERE <<

$8.96
 

CHEAP AND EFFECTIVE: THE $5.99 RDA SHIPPED FROM THE USA





Basic, cheap, and effective!

The Dripper RDA is exactly what you think it is: a rebuildable dripper. This is a very basic design, perfect for someone who wants to get into rebuilding. There's a 1 positive and 1 ground post, ideal for single-coil builds. Airflow has been improved over past RDAs, in that the airflow comes in from a hole in the side, instead of at the bottom of the deck. This also means reduced leaking. The top cap also features an integrated mouthpiece for a uniform look. The Dripper comes with a pre-made coil.

For $5.99 is a great little dripper!  

WHERE: >> HERE << 

$5.99

BLOWOUT: VAPORSHARK DNA 30 DROPS TO $119.00 + DNA40 PREORDER





Everyone knows what a HUGE fan I am of the Vaporshark.   To me the chip is secondary - its more build quality and support.  With the unveiling of the new DNA40 the DNA30 original size version has dropped to just $119.99 (50 bucks off).

A STEAL in this bloggers opinion.

They are also opening pre-orders on the new Vaporshark running the DNA40.


$119.00 DNA30 VERSION:  >> HERE <<

PRE-ORDER THE rDNA40:  >> HERE <<



THE IGO-W PLUS IN COLORS + FREE DRILLING SERVICE + FREE JUICE - $13.49





UD IGO-W Plus RDA Rebuildable Atomizer is similar to the original IGO-W RDA Rebuildable Atomizer favorite but with a 22mm diameter, larger airholes and now available in a variety of colors!   

This vendors offers free air hole drilling services and every order gets a free 10ml bottle of juice!

THE HARD COPY:

  • Large airflow holes (2mm)
  • Made of 304 Stainless steel
  • Available in different colors
  • Standard 510 connector
  • Dual Coil capable
  • 22 mm diameter
  • 25.4 mm height including the 510 connector
  • Hole for 510 drip tip

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $13.49
FREE DRILLING SERVICE - FREE 10ML BOTTLE OF JUICE 

 

STILL GOING: ASPIRE NAUTILUS MINI + 4 HEADS - $22.99





Deal includes 2 extra heads - so you will get 4 total.

One of the best replaceable head tanks I have used.  Far better then the original Nautilus tank in my opinion.    I use mine on an eleaf iStick - a fantastic little setup!   The mini itself isn't a tiny tank - its about the same size as a normal Aerotank.


THE HARD COPY:

The Aspire Nautilus Mini is the next big thing in the vaping world. This tank system uses a new type of coil technology that ensures proper saturation to the wicking material.. The Nautilus Mini uses a BVC (bottom vertical coil) that allows for much greater vapor production and extremely enhanced flavor. This bottom vertical coil unit is comparable to a stone age cartomizer in a sense that there is no wicking material that goes directly through the coil. The vertical coil is surrounded by wicking material on the outside, thus allowing airflow to be pulled straight through the center of the coil. Though this tank system does not use a dual coil, the vapor production from it tops any dual coil glassomizer that is currently on the market. Another huge advantage to this new coil technology is that the lifespan of the coil is much more exceptional than its predecessors. These new bottom vertical coils are also backwards compatible with the original dual coil units for the Aspire Nautilus, meaning that the old styled coil units will work properly in the Nautilus Mini and the new styled coil units will work properly in the original Aspire Nautilus. Adjustable airflow is almost a must in the vaping world today, and the Aspire Nautilus Mini offers a uniquely redesigned style of airflow control where pre-drilled air holes rotate on a ring that clicks into place for the user’s desired setting. The Nautilus Mini is constructed entirely of Stainless steel, with a pyrex tank section. Each part of the tank system can be disassembled for cleaning purposes also. All in all, the Aspire Nautilus Mini is a tank system that is a thing of pure beauty to witness. 


What’s in the box:

  • Fully rebuildable Aspire Nautilus tank
  • eGo beauty ring 
  • (1) 1.6 ohm dual coil atomizer head (attached in tank) 
  • (1) 1.8 ohm dual coil atomizer head 
  • (2) Extra replacement heads
  • Instruction manual

WHERE:  >> HERE <<


REPLICATED: THE DARK HORSE RDA - $13.45



http://goo.gl/mi31vk


A BEAST of a RDA!   Now replicated at a FANTASTIC PRICE! 

Thick heavy posts, monster airflow, and large wide bore delrin drip tip.


THE HARD COPY:
  • Removable 510 drip tip
  • The POM top cap lid is removable for easy access to the deck without removing the top cap
  • The lid also works as a heat insulator
  • 510 threading connector, adjustable copper 510 center pin
  • Tri-post design for single/dual coil build
  • 6 air control holes on the sleeve
  • Laser engravings logo
  • 22mm diameter
  • Height without drip tip: 34mm
  • Comes with a POM 2-in-1 top cap lid + drip tip combo
 
WHERE: >> HERE <<
 
$13.45
 
 

DIFFERENT: WIDE BORE DRIP TIPS WITH AIRFLOW CONTROL





Constructed of stainless steel with double o-rings for added stability, these wide-bore drip tips boast a special feature. The brightly colored aluminum band rotates to allow you a little extra airflow. Why? Well, we hear rumors that the biggest cloudchasers "sidestream" or pull in a little fresh air alongside their vapes. We haven't had a chance to test it, so let us know how it works for you! They are also nice for folks who just want to cool or thin down their vape a little. Available in 11 colors for $2.33 each, or if you just can't decide grab the 11-pack for just $20.01.


Colors can picked from the drop down menu.


WHERE: >> HERE <<

BLEM SALE: DRAGON PROVARI'S ON SITE





A very hard Provari to get.

These Provari's are only avialable in B&M's.   They have never sold them online.  Today Provari has stocked the Dragon in their BLEM clearance section. 

For those looking to pickup a Dragon at a good price - get them while you can. 


Features of the ProVari Polished Dragon:

• Microprocessor controlled
• 2.9-6.0 variable voltage range with .1 volt increments
• Built-in digital display
• AccuSet™ Technology - Self-Calibration Feature
• Atomizer Ohm's checker built-in
• Battery voltage checker built-in
• Translucent light-up pushbutton with low battery indicator
• Single battery design
• Stock 510 Connection
• Classy looking dragon design made of polished stainless steel
• 16 second safety cutoff
• Short circuit protection
• Reverse battery protection
• Thermal monitoring system
• Amperage limiting
• Battery monitor and over-discharge protection
• Machine engraved logo
• Vented for added safety
• Proudly made in the USA
• 1 Year warranty with optional 2 year warranty
• Measures - 3.49" L X .90" Dia.(without atomizer)
• Weight - 4.2 ounces (without battery)



WHERE: >> HERE <<

IN STOCK: THE IPV3 - 150 WATT BOX MOD - $134.99



http://bit.ly/1rmGcoY


THIS IS AN IN STOCK PRICE NOT A PRE-ORDER!

The IPV3 the newest box mod from Pioneer4you.   This variable wattage behemoth maxes out at a whopping 150 watts.  Its predecessor, the IPV2, was a great box mod - so we should expect another great device. We have been saying for a few months now that the box mod is the "new baby" of the industry and this mod is a prime example.  

It's simple - you can do a lot more with a box then you can with a tube.

This is the lowest price on the IPV3 I have seen.  Jump on it while you can.






THE HARD COPY:

- Output Power:10~150 watts
- Resistance: 0.15~2 Ω
- Output Voltage: 1~7 volts
- Input Voltage: 3.2~9 volts
- Dual 18650 Battery
- OLED Screen
- Water Resistant
- Upgradeable Firmware

- SX330 V3S Chip


WHERE: >> HERE <<

$134.99+ FREE SHIPPING


TASTE THE RAINBOW: THE MANHATTAN REPLICA IN COLORS - $12.80



http://goo.gl/GSo6GZ


You've heard all the buzz surrounding the Manhattan styled mods, and now you can get one in brightly colored anodized aluminum. Body is anodized aluminum, contacts are brass, insulators are delrin. Bottom firing button is magnetic and does not lock. Houses a single 18650 battery. 

THE HARD COPY:
  • 510 threading connection
  • Brass contacts w/ Derlin insulators (positive insulator is adjustable)
  • Bottom magnetic firing button, without lock
  • Engraved logo
  • Houses single 18650 battery (battery sold separately)
  • Internal diameter: 18.8mm

WHERE: >> HERE <<

$12.80



FROM THE USA: THE ONSLAUGHT RDA REPLICA - $16.99



http://101vape.com/rebuildable-atomizers-tanks/455-onslaught-rda-clone-by-tobeco.html#oid=1003_290
http://101vape.com/rebuildable-atomizers-tanks/455-onslaught-rda-clone-by-tobeco.html#oid=1003_290


CHEAPER THEN FASTTECH - SHIPPED FROM THE USA!

This clone version looks to be a nice 1:1 copy. The atomizer features an adjustable airflow control ring, a quad-post design for triple coil builds, 3.6mm deep juice well, stainless steel posts, chromed brass 510 center pin, large wire holes, and engraved logos.


THE HARD COPY:

  • Compatible with 510 drip tip (drip tip sold separately)
  • Air flow adjustable (3 air holes on the AFC ring)
  • AFC ring material: Black plated stainless steel + brass + copper
  • Quad posts with slotted head screws (1 positive + 3 negative)
  • Posts material: Stainless steel
  • Deep juice well, approximately 3.6mm
  • 510 connection (chromed brass center pin)
  • With logo engraving
 
WHERE: >> HERE <<
 
$16.99

BOGE XL CARTOMIZERS - BLACK OR STEEL - $2.97 FOR 5





Did you know that more then 50% of the ecig industry still uses cartomizers?  
I couldn't believe it myself - but its true.

Here is the absolute lowest prices I have ever seen on a box of Boge XL cartomizers.  
You can get them in both stainless steel or black.   They also come in 2.0 or 3.0 ohms.

The industry standard for cartomizers is Boge!

Super simple to use - great for testing flavors!


WHERE: >> HERE <<

$2.97 for a box of 5




CARBON FIBER: THE KNIGHT REPLICA MECHANICAL (6 COLORS) - $23.29



http://shrsl.com/?~6rb8

Now in 6 new colors!

Here’s something a little different and in a very good way. It’s the Knight styled 18650 mechanical mod, and it’s constructed primarily of brass or copper with a carbon fiber outer tube with a Maltese Cross cut into it to expose the brass below. Spring-loaded bottom firing switch has locking ring to prevent accidental firing.
 

THE HARD COPY:
  • Recessed 510 connection
  • Silver plated brass battery contacts (adjustable)
  • Brass tube wrapped with carbon fiber
  • 4 vent holes on bottom cap
  • Laser engravings
  • Houses single 18650 battery (battery sold separately)
  • 23mm diameter
  • Bottom spring-loaded firing button, with reverse-threaded locking ring

WHERE: >> HERE <<

$23.29

 

ANOTHER: THE ELEAF ISTICK DROPS AT $29.99 + FS

INCLUDES FREE SHIPPING FROM THE USA!





I got my Istick the other day and I must say - its an amazing little mod.   Its ULTRA portable.  Smaller then the original vaporshark - this little mod lasts a long time and packs 20 watts of power. 

I was so impressed I bought 3 more. 

THE HARD COPY:
  • 2200mAh Li-Ion Battery
  • VV/VW – up to 20W and 3v – 5.5v
  • OLED display
  • 510-Threads
  • Power on/off: Press the button for five times to turn the iStick on and off.
  • 10-sec Protection: Maximum of 10 seconds per drag.
  • Atomizer Short-Circuit Protection: If atomizer short-circuits, the OLED screen show “Atomizer Short”.
  • Low-Voltage Protection: Once the battery is below 3.3V the OLED screen will show “Lock”, which means its time to recharge.
  • Unlock the Low-voltage Protection: The iStick begins working again once it reaches 3.65V.
  • Low power Alert: If the battery’s power is lower than 10%, the power symbol on the screen will flash.
  • Atomizers from 1ohm to 3ohm capable
  • Accurate Metering
  • Pass-Thru vaping while charging
  • Charged via micro usb

WHERE: >> HERE <<


$29.99 + FREE SHIPPING
 

MARK II: THE MAGNETO GETS A VERSION 2 - $34.06



http://goo.gl/WFEJGJ


It's the real deal! The Authentic Smoktech Magneto II. This telescopic mod adjusts to fit your choice of 18- series battery, and the 510 connection floats to allow you to get a perfect flush fit for your atomizer and your battery. Bottom firing switch is magnetic, and has a reverse-threaded locking ring. Available now in black, gold and red.

THE HARD COPY:
  • 510 threading connection
  • Floating 510 center pin
  • Telescopic tube
  • 3 air holes on the tube
  • Bottom magnetic firing switch
  • Reverse threaded locking ring
  • Houses single 18350/18500/18650 battery (batteries sold separately)
  • Logo engravings

WHERE: >> HERE <<

$34.06


PROTECT: ASPIRE NAUTILUS MINI METAL TANK - $13.95 + FS



http://bit.ly/1rl7U0G



I love the new Aspire Nautilus Mini.  A really really great little tank.  

The problem with most metal tanks is - you cant see your level.   Now you get the best of both worlds.   This slips over your existing glass tank - giving it a great new look and protection at the same time.  It also looks pretty bad ass! 

Picked up two.

WHERE: >> HERE <<

A.B.C PICKS UP THE LEGIT VS CLONE STORY








The legit vs clone controversy is heating up. In an odd turn of events A.B.C has picked up on the legit vs clone story and is starting a new show called "The Commission".   

What is the commission?  The commission is a group of legit mod makers and distributors out of southern California that control the movement of many high end mods.  They decide what shops and websites get said mods.  


You can listen to more here: >> HERE <