REPLICATED: THE 454 BIG BLOCK RDA - $23.99 FREE SHIPPING

A rebuilders dream!

Single, Dual, or Quad coil setup

Unique design with no negative posts, the entire outside of the atty is the negative 'post'. Wires are secured by a removable stainless steel ring. Delrin insulated drip tip with stainless steel accent and unique side venting to prevent spit back and create a vortex inside of the cap. Adjustable air control and direction flow outer cap. By lining up the different configurations, it can produce 1,2 or 4 adjustable sized vent holes depending on your build.

• Conical top to increase flavor.
• Removable top cap for easy dripping and air fin cooled.
• Singe post design. Center post has crossed drilled .06" holes for large wire builds.
• Very deep juice well.
• Solid copper center post inner for superior conductivity.

WHERE: >> HERE <<

$23.99 + FREE SHIPPING

THE KANGER MEGA AEROTANK - $27.99

The Kanger Mega Aerotank is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, pyrex glass, and dual coil heads. The Kanger Mega Aerotank also comes with an upgraded airflow control base to really maneuver blasts of flavor. This genuine Kanger Aerotank Mega should be the go to for any serious vapor!

The Aerotank Mega includes: 

• Upgraded Kanger airflow control base
• 510 threading
• 3.8 mL capacity
• Pyrex tank and stainless tube (glue free)
• Bottom dual coil atomizer heads

Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise. 

Package contents: 

• 1 x Kanger Aerotank Mega (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
• 1 x Stainless tube
• 1 x Glass tube
• 1 x 510 drip tip
• 2 x dual coil 2.0 ohm atomizer heads

WHERE: >> HERE <<

$27.99

JUST THE TIP: VAPELYFE STYLE DRIP TIPS (DOUBLE O-RING) - 5 FOR $9.52

Very hot drip tips. These drip tips feature a wide bore with double o-rings.  The double o-rings ensure a snug fit.  Get them in an economical 5-pack for just $7.49, or use the drop down box on site to get them individually for $2.37.


THE HARD COPY:

• Stainless Steel
• Double O-Ring
• Laser etched Vapelyfe Logo
• Sold in a pack of 5 or individual
  

WHERE: >> HERE <<

5 for $9.52

IN COPPER: THE MORPHEUS MECH KIT - $32.77

Here is a great deal on the Morpheus mechanical kit.   This kit comes with all 3 tubes allowing you to use all the popular 18 series batteries.  The tubes and contacts are made of pure copper for little voltage drop - making this a hard hitting device.  The finish is brushed with polished accents.

This mod is sleek, elegant, with a slight attitude problem. ;)

THE HARD COPY:

• Tube style mod
• 510 threading connection
• Copper contact pins
• Adjustable positive contact pin
• Spring-loaded bottom firing button, w/ reverse threaded locking ring
• Each tube is engraved with logo and serial number
• Houses single 18350/18500/18650 battery (batteries sold separately)
• 22mm external diameter
• 18.4mm internal diameter

WHERE: >> HERE <<

$32.77

THE MUTATION X - THE REBUILDABLE ATOMIZER BY INDULGENCE - $24.99

WE ARE ON ROUND 2 OF THIS DEAL - FIRST VENDOR SOLD OUT

Want Originality? Airflow? Deep Juice Well? Affordability? Meet Mutation X! This RDA has 9 airflow holes on each side and it's adjustable! Blowing gigantic cloud has never been easier!

Designed In USA

The Mutation X RDA is an all US Designed RDA, features 18 air holes in a diagonal pattern to induce swirling, and its adjustable airflow control allows you to blow clouds or just for flavor chasing.

Product Features:

• Made out of Stainless Steel Construction
• SS center post with SS screws
• 18 air holes in total to have more than sufficient air travel through your coils
• Adjustable Air-flows cyclops style
• Deep Juice Well
• Huge Post Holes
• Top Heat Sink to disburse heat more quickly
• Negative Posts are milled to the deck for max conductivity and rigidity
• Comes with a matching drip tip
• 22mm in diameter
• clean no logo form factor around the body of the RDA
• Great for doing dual coil builds
• Original & Affordable
• Designed In USA

WHERE: >> HERE <<

$24.99 + FREE SHIPPING

BLOWOUT DEAL: 50% ALL REPLACEMENT HEADS (VARIOUS)

Here is a CRAZY deal on all sorts of replacement heads!

Everything your going to need for your fill and vapes!

This deal is going on for the next 24 - 48 hours.    

Get in before they sell out!   


WHERE: >> HERE <<

Use coupon code HALFPRICE

FINAL DAY: IN STOCK - THE IPV V2 - 50 WATT BOX MOD - $99.00

These have been selling out everywhere.   I own one, they rock! 

The price of $99.00 will show up when you add it to your cart.  

This is the FINAL day until the sale ends. 


THE HARD COPY:

The iPV V2 is a powerhouse of a box mod and simply amazing.
This variable wattage mod will allow you to fine-tune your vaping experience by adjusting your power from 7W to 50W in increments of 0.1 watts! Able to fire coils at 0.2Ω up to 3.0Ω, this mod is powered by a single IMR 18650 battery and is capable of producing up to 50 watts of power! 

The battery is removable, but can also be charged internally with the included USB to Micro-USB cord. While charging, the IPV V2 acts as a passthrough! The OLED screen is very easy to read, and will tell you your wattage, resistance, output voltage and battery life at a glance, without having to fumble through menus. In addition to the standard firing button on the side, there's also a "touch plate" sensor next to the 510 connection. This sensor allows the device to be fired just by resting a finger or thumb on it. The iPV V2 has 510 threading, but will accept any 510 to eGo adapter if you'd like to use eGo-threaded atomizers. This mod is made of high-quality anodized aluminum, and provides more than enough power for beginners and veterans alike! Attractively packaged. Comes with micro-usb charging cable, extra cover screws and small screwdriver. Just add you favorite tank, RDA or carto and some e-liquid and you're ready to roll!

Specifications and Features:

Output Power: 7W - 50W
Output Voltage: 3.6V - 8.5V
Input Current: 1.3A - 20A
Input Voltage: 3.2V - 4.5V
Efficiency: 93%
Loading Resistance: 0.2Ω - 3.0Ω
Screen Size: 0.96" OLED
Low Voltage Protection
Low Resistance Protection
High Input Voltage Warning
Output Short Circuit Protection
Reverse Battery Protection



WHERE: >> HERE <<

$99.00 IN CART

ALEXA CHARTS: VAPINGUNDERGROUND IS A PHENOMENON

Time for some horn tooting...

These charts are your world wide rank.   Lower numbers are better. 

All forums are great.  This is just a comparison of traffic.  
These are simply trending indicators.

Vaping Underground goes live at the end of June

These stats are pretty incredible.   This graph from Alexa shows the gains in traffic that Vaping Underground has made in a very short period of time.   While still a ways away from moving past the #1 forum (ECF).  We will see the trend continue to tick up!

Vaping Underground is in dark blue

Here is a another graphic showing a sampling of other great popular forums.  I was shocked to find out that we were already beating out all of them in terms of traffic.   I was also EXTREMELY shocked to see that we were edging out Calivapers forum.
 

ACCOMPLISHED IN LESS THAN 60 DAYS

JOIN US HERE: >> HERE <<

DROP: THE ZNA REPLICA GOES LIVE @ $73.74

The ZNA replica has gone live. 

Tyger Tyger from Vaporjoes Canada has broken this deal wide open - so why not give her some extra attention?

I spoke with Zen about this mod at Vapaplooza and his response was unexpected.  I thought he was going to be screaming bloody murder, but he was very eloquent explaining why this will actually help his business.   


THE HARD COPY:

It's here! The ZNA Styled Mod. With a range of 7 to 30 watts, and the capability to fire resistances between 0.5 and 3.3 ohms, it is powered by a single 18500 (18650 tubes coming soon!). Contacts are copper.

WHERE: >> HERE <<

SHIPS WORLD WIDE FOR FREE!

MAXIMIZE: THE VERITAS 1:1 REPLICA RDA - $8.49

Veritas 1:1 dripper

Here is a great deal on the Veritas 1:1 replica RDA.   Built with a reduced chamber for maximum flavor and a monster air-hole for maximum airflow.    The dripper has a huge juice well for longer vape times.

This extremely attractive RDA will look great on any mod.  A steal at just $8.49

THE HARD COPY:

• 1:1 clone
• Compatible with 510 drip tip (drip tip sold separately)
• Air flow control (1 air hole on the sleeve)
• The air hole also works as a fill hole, and you don't have to remove top cap to refill
• Tri-post design for dual coil build
• Deep juice well (approximately 6.3mm deep)
• With ambigram logo engraving
• 510 connection (brass center pin)
• 21.8mm diameter

WHERE: >> HERE <<

$8.49