HIDE IN THE OPEN: THE CREE FLASHLIGHT WITH A 510 CONNECTION



http://shrsl.com/?~65gr


This is one of those accessories I LOVE!

Turn your mod into a flashlight.   Not only is it extremely handy, but things like this show why its going to be EXTREMELY difficult to regulate our hardware.    Just pop a flashlight into the 510 connector and its NO LONGER an electronic cigarette - its just that simple.

I'm sure people will find even more useful reasons to use these.   


THE HARD COPY:
  • Reflector diameter: 16mm
  • Beam range: 100 meters
  • Working voltage: 3.0-4.2V
  • 280 Lumen
  • 510 connection
  • Cree style LED
 

WHERE: >> HERE <<

$6.87
 

ULTRA WIDE BORE DRIP TIPS - 5 for $8.93






Nitrobex has been pushing me to pimp these for months.   I ordered them and got them in today.  I'm  VERY impressed.    One of the widest bore stainless drip tips that I have used.   For the price - a complete steal.  

Your getting 5 for just $8.93

Simple and elegant - makes a fine addition to any vape collection.  
You will not be disappointed!  The reviews are excellent.
 


WHERE: >> HERE <<

$8.93 for 5



GOT PLUID?: NEW SIZES - NEW DEALS - AND AN EPIC CONTEST!





Vaping Watch hit me up today with lots of good news!

All his juices (including the entire Mad Murdock line) will now be available in smaller 15ml sizes!   For people that wanted to TRY some of the epic juice he has on site, without committing to a larger bottle.

There is also a sale going on the HUGE 16oz bottles (shown above) for just $220.00.   For those that are Mad Murdock lovers you can now get a monster 16oz bottle (16 30ml bottles worth) for just $220.00 about 1/2 the normal price if you were buy them separate.


NOW LETS TALK CONTESTS!

10th prize.  TEN winners.  $5.00 credit to www.vapingwatch.com

9th prize.  NINE winners.  $10.00 credit to www.vapingwatch.com


8th prize.  EIGHT winners.  $20.00 credit to www.vapingwatch.com


7th prize.  SEVEN winners  IGO-W w/ winner's choice, 1 30ml bottle of juice from www.vapingwatch.com


6th prize.  SIX winners.  AGA-T2 Genesis Atomizer w/ winner's choice, 1 30ml bottle of juice from www.vapingwatch.com


5th prize.  FIVE winners.  Tobeco 30 watt mod w/ 1 Sony 18650 2600mAh 30A VTC5


4th prize.  FOUR winners.  Dovpo EMech 30w Mod w/ 2 Sony 18650 2600mAh 30A VTC5


3rd prize.   THREE winners.  30w Box mod with 2 Sony 18650 2600mAh 30A VTC5 and Nitecore Digicharger D4


2nd prize.  TWO winners.  Winner's choice Poldiac Mod


1st prize.  ONE winner.  Winner's choice Poldiac Hybrid



This contest will run though Aug 27th midnight.

No purchase necessary.  

You buy a "Contest Entry Token" on his site for $0.00 and the drawing is based on those.

If your just buying a token be sure to check "FREE CHECKOUT" on the final checkout area.


WHERE: >> HERE <<

EPIC DIY / JUICE MAKER SALE: 1 LITER OF 100MG NIC BASE - $50.00

LOWEST PRICE ON 100MG NIC EVER!!


http://shrsl.com/?~65ao


With all kinds of regulations coming down - its a good idea to pickup a $50.00 insurance policy.  This is enough Nic base to last the average vaper (after its cut) for years to come.  

For someone like me I can turn this into 16 LITERS  ( 540 30ml bottles ) of juice at my nic level.  
Impressive for a very small investment.  This also gives you an idea of how much profit is in juice making. :)

This is a great opportunity to ensure you have a supply for any issues that may arise.

Today this vendor is having a an epic sale on 100mg nic base.  
I have used them in the past - its very very clean! 

Great for mom and pop juice companies too!

This is 100% flavorless nicotine base.  
All you need to do is cut it to your desired mg level, add flavoring to taste.

I keep my nic in the freezer to extend its shelf life.


THE HARD COPY:

Our famous Unflavored Nicotine "Smoke Juice" E-Liquid is made with the highest grade nicotine available.  Buy with confidence knowing that you are getting the very best nicotine available and that it is always distilled from actual tobacco leaves not synthetically produced.  For more information read below and click the link to see our latest batch testing results.


WHERE: >> HERE <<


WARNING: For experienced DIY'ers only.  100mg nic base is nothing to play around with.  Nic at this level is highly toxic.  This is to be broken down and mixed.  Use proper protective gear when mixing at these levels.





BLOWOUT: MNKE 26650 BATTERY FROM THE USA - $7.59








The gold standard of the high amp 26650 batteries is the MNKE 26650.   These have been a tried and true battery for years.   Now being offered at a great price from a reputable vendor.  This price is too low to pass up!


THE HARD COPY:

MNKE batteries are the definitive battery for the mechanical-mod user.  Not only are these the safest batteries available, they also perform better for a longer period of time.  The high amp-limit on these batteries means you can build sub-ohm coils without fear of the batteries venting.  These are 3500mAh batteries, and can hold a charge above 3.7-volts for much longer than other IMR batteries, which means hours of use before a noticeable difference in voltage compels a battery change. These batteries will perform just as well in an APV or Variable Voltage/Variable Wattage mod, although the advantages won't be as apparent. If you like to build your own sub-ohm coils on a mechanical mod, you won't believe the performance and battery life these cells offer.

Specifications:

Brand Name: MNKE
Size: 26650
Type: Li-Mn (High Drain)
Rated Capacity: 3500mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Rechargeable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Orange
Maximum Continuous Discharging Current: 20 A
Maximum Pulse Discharging Current: 60 A
Maximum Continuous Charging Current: 6.5 A



WHERE: >> HERE << 

USE COUPON CODE ECF5OFF TO BRING THE TOTAL TO $7.59 




USA DEAL: ZENITH V2 RDA IN 3 STYLES - $14.99




http://www.pimped.info/click/click.php?id=288


IN STOCK AND READY TO SHIP FROM THE USA

The Zenith v2 replica is well known for its build quality and most importantly its airflow!  
The replica's debut in three different styles.  The price can NOT be beat!

THE HARD COPY:

  • 22mm device
  • WELDED negative posts
  • Slit holes for easy building
  • Hidden delrin insulator at drip tip entry
  • Adjustable silver plated copper contacts ensure flush mounting on any device
  • Classic Zenith engraving
  • Dual adjustable air holes with LOCKING AFC ring
  • 510 thread atomizer

Comes with SS, Copper, and Black PVD airflow control rings


WHERE: >> HERE <<

$14.99

STEAMPUNK: THE ETCHED COPPER - $39.23



http://shrsl.com/?~654q
http://shrsl.com/?~654q



There have been a few different finishes on this mod but this by far is my favorite.   I have resisted putting these up until now.  These full-featured steampunk styled mod house an 18650 battery. Features include a magnetic bottom firing switch with reverse threaded locking ring, copper contacts, an adjustable positive pin, and really cool detailing on the tube.

THE HARD COPY:
  • 510 threading connection
  • Adjustable 510 center pin
  • With air-channel cuts on the top cap
  • Copper battery contacts
  • Adjustable positive contact
  • Bottom magnetic firing button, with reverse-threaded locking ring
  • Inner diameter: 18.6mm
  • Houses single 18650 battery (battery sold separately)

WHERE: >> HERE <<

$39.23

ORIGINAL & AFFORDABLE: THE ORCA RDA + FREE JUICE - $17.99





The ORCA RDA is an original design by Fcusecig.  This is the same company that makes the popular Argus RDA.   This 3 piece design is simple and effective.  This offers a very deep drip well and massive holes for maximum airflow potential.

THE HARD COPY:

  • 3 post designs
  • Made of 304 Stainless Steel
  • Multiple Adjustable Air Flow Control options to fit your build
  • Unique Top Cap Design
  • Deep Juice Well
  • Beautifully designed and engineered
  • Originality and Affordability in One

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $17.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

RESTOCKED: GWAR LIQUIDS RETURN TO MTBAKERVAPOR!




http://shrsl.com/?~64wa




THE GWAR LINE HAS BEEN RESTOCKED!  
THESE ARE GETTING IMPOSSIBLE TO BUY DUE TO HOW POPULAR THEY ARE.
I HAVEN'T SEEN LIQUIDS THIS POPULAR SINCE THE DEBUT OF PLUID.

They have finally restocked in all flavors and nic strengths.   
Get in quick before they sell out again!

I had the opportunity to try all these liquids at Vapefest DC and loved them!   Great names, great flavors and finally mtbakervapor has glass bottles!   Cheap at $9.89 per 30ml.  Check them out, your really really going to love them!

German Chocolate Beefcake, Bloodbath, and Jizmoglobin are among my favorites. 


WHERE: >> HERE <<

USE COUPON CODE VAPORJOES TO BRING THE TOTAL TO $9.89

THE MEPHISTO RDA WITH THE 3 RING KIT - $15.81






The Mephisto rebuildable dripping atomizer clone is a high quality drip atomizer composed of stainless steel with a stainless air flow control ring. The Mephisto atomizer clone features massive post holes that can easily accommodate thick kanthal wire and multiple coils. 

The Mephisto clone large screws that easily allow you to secure your coils with ease. The Stainless Mephisto RDA clone stands above all for builds that demand huge air flow. It has dual cyclops style air holes that allow you to adjust the airflow of your atomizer. 

The Mephisto atomizer clone features silver plated contacts to ensure your voltage drop stays as low as possible. The Mephisto RDA clone features a standard 510 threaded connection and will work with any mechanical mods that are equipped with a 510 connection. The Mephisto atomizer clone is 22mm in Diameter.


THE HARD COPY:

  • Stainless steel construction
  • Compatible with 510 drip tip (drip tip sold separately)
  • Hidden Derlin insulator on the drip tip entry
  • Sliding airflow control, single or dual air hole option
  • Tri-post design, with flat head screws
  • 3mm pole holes and 4mm deep drip well
  • Stainless steel posts
  • Silver plated 510 contact pin (adjustable)
  • 22mm diameter
  • CNC logo engraving

WHERE: >> HERE <<
$15.81

IMMINENT: PROVAPE TO DROP THE FIRST VARIABLE WATTAGE PROVARI





My eyes and ears are everywhere in the industry.  Vaporjoes always brings you the goods!

Coming Soon.

Provape will be unveiling a new Provari.   They have finally taken the plunge and are coming out with a new variable wattage version.  My sources tell me that this will be a 24 watt board and have a completely different display.    The top cap will be interchangeable so you can have different looks.  This is 100% confirmed by multiple sources. 

Be on the look out here for pictures as soon as I get them.


Discussions have been on going about this here:


http://vapingunderground.com/threads/new-evolv-board-and-provari.3278/

 

SEXY IN COPPER: THE TUGBOAT RDA - $12.34 SHIPPED FROM THE USA




The Tugboat RDA replica is now available in Copper! 

For $12.99 and shipped from the USA - a stunning deal!  

The legit version costs $99.00.. ROFL


THE HARD COPY:
  • Comes with an engraved and serialized drip tip.
    Stainless Steel Construction
    22mm outer diameter
    3 post design
    Huge juice well
    Flush mounted cap
    Huge air hole so most likely no air hole drilling required
    Comes with 1 Tugboat Drip Tip ($25 Value)
    Heat resistant drip tip with serial and Tugboat engraving
    Engraved with Tugboat and American Flag

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $12.34

12 HOURS ONLY: KANGER AEROTANK GIANT 26650 - $31.94 FREE SHIPPING



 http://www.pimped.info/click/click.php?id=274





The monster is now live and these ROCK!   I was lucky enough to get a pre release a week early. The best aerotank you can get.  These are purpose built for a 26650 mod.  With the sub-ohm heads these will work GREAT on a mechanical or variable wattage 26650.

THE HARD COPY:

The Kanger Aerotank Giant is the accumulation of all the best things from the Protank and Aero series. Like its predecessor, this clearomizer comes with food grade stainless steel, pyrex glass, and dual coil heads. The Kanger Aerotank Giant also comes with an upgraded airflow control base to really maneuver blasts of flavor. This genuine Kanger Aerotank Giant should be the go to for any serious vapor! 

The Aerotank Giant includes:
  • Upgraded Kanger airflow control base
  • 510 threading
  • 4.5 mL mL capacity
  • Pyrex tank and stainless tube (glue free)
  • Bottom dual coil atomizer heads
  • Airflow Control: Turn the air control valve at the base of the tank clockwise to decrease airflow. To increase airflow, turn the air control valve counter-clockwise. 

    Package contents: 

  • 1 x Kanger Aerotank Giant (Pyrex tank, top cap, bottom cap and Airflow control 510 base)
  • 1 x Stainless tube
  • 1 x Glass tube
  • 1 x 510 drip tip
  • 2 x dual coil 2.0 ohm atomizer heads

WHERE: >> HERE <<

SUB-OHM HEADS: >> HERE <<
 
$31.94 + FREE SHIPPING


24 HOURS OFF: THE BIG 35,000,000




Another milestone has been reached.  Vaporjoes has hit 35,000,000 visitors and we are celebrating with a day off.  
We will resume our deals tomorrow at Noon EST.

While you wait please visit our forum @ http://www.vapingunderground.com


If your not already signed up  - Join our daily deals email list.



EVEN LOWER: THE PLUME VEIL LOGOLESS RDA REPLICA - $19.99

NOW EVEN CHEAPER!
 

http://bit.ly/1tQtEFB



Just a few short weeks after release this very popular atomizer has been replicated.  

This version is 100% logo free to appease the logo gods.

We encourage others to go logo free.


THE HARD COPY:

22mm diameter
High-quality stainless steel construction
Delrin insulator at top, holds in heat and contributes to amazing flavor
Four-post design, very easy to build on
Negative posts machined out of the deck, for the best conductivity and posts will never turn or move
Gold-plated base and 510 connection, for unmatched conductivity
Adjustable cyclops-style airholes on side
Adjustable secondary airflow, bringing air through the negative posts behind the coils
Adjustable top-cap airflow, creates a vacuum effect increasing both airflow and flavor


Package Contents: 


1 x  RDA
1 x  Drip Tip
1 x  Wooden Gift Box




WHERE: >> HERE <<

$19.99
SHIPS OUT OF THE USA



TAKE 10% OFF All Provaris (Clearance Included) TODAY ONLY




You've heard the buzz, you know the reputation... no intro is required. The Provari is the device that set the benchmark that all Variable Voltage devices are compared against. Solid, heavy, well made and unmatched for quality and reliability.

And now, there's a lot of selection of brand new Provaris, both standard and mini to choose from! Choices include the limited edition Dragon Provari (usually only available in store from dealers!) and the gorgeous Gold ZenKote™. Don't let the term "blemished" put you off-- most owners are hard pressed to find the "blem"!


WHERE: >> HERE <<
USE COUPON CODE
GOLDDIGGER TO TAKE 10% OFF YOUR TOTAL ORDER

BUILT TO QUAD - UNIQUE DESIGN: NUCLEAS 1:1 REPLICA RDA - $12.85



http://shrsl.com/?~64l5


The reviews are in. Users of this 1:1 replica are impressed. We were intrigued by the unique design. The Nucleus styled atomizer takes a different approach to positive and negative posts. The center post section is completely removed to build it, giving you all the room in the world to maneuver and tweak. The top section offers two positive connections, and the bottom section is your negative connections. When built the entire section is replaced and held in place by the single large-head screw. Six air-holes in the outer cap can be lined up with either four or two holes in the inner cap. Some users are indicating they would like more airflow for the aggressive quad builds. This blogger suggests that adding a single center air-hole on the inner ring would allow you to utilize all six of the holes on the cap. A simple solution that doesn't risk chipping or scratching the finish on the cap. Constructed of stainless steel with 24K gold plated brass components.


THE HARD COPY:
  • 1:1 clone
  • 22mm diameter
  • Removable 510 drip tip
  • Dual-coil or quad-coil setup
  • Air flow control, with 6 air holes on the sleeve
  • Silver plated brass top cap, with CNC engravings
  • Laser engraved serial number on the bottom
  • Height without drip tip: 25.5mm
  • 510 threaded connector

WHERE: >> HERE <<

$12.85
 

USA DEAL: TWO SONY 30AMP / 2100MAH 18650s - $15.84 + FREE SHIPPING




http://bit.ly/1nJhkFQ



The 4th incarnation of the Sony 18650.

Terrific for sub-ohm builds, these Sony US18650VTC4 18650s are rated to 30 Amps. 
These have great ratings.  The price rocks for a USA seller - this price includes free shipping!


THE HARD COPY:

Sony US18650VTC4 18650 30A Drain Unprotected Lithium Ion Flat-Top Battery
The Sony VTC4 battery is perfect for any 18650 compatible devices. Additionally these batteries are a great choice for experienced vapers using sub-ohm coils. 

Features:

  • 3.6 Volt
  • Cut-off Voltage at 2.5 Volts
  • Fully Charged at 4.2 Volts
  • 30A Drain
  • 2100 mAh
  • Flat-Top Battery
  • Safe Chemistry

WHERE: >> HERE <<

$15.84 free shipping

DON'T FORGET TO ENTER FOR TONIGHT'S PROVARI / SHARK CONTEST





Its now week 4!  

Don't miss your chance to win a Provari of your choice or Vapor Shark DNA30.   

Tonight on Mod Envy we will announce the winner for this week.

If you haven't already entered please go to this thread on Vaping Underground:

http://vapingunderground.com/threads/vaporjoes-12-provari-12-winners-12-weeks-of-summer-giveaway.162/

Simply reply to the thread and you are entered in all remaining 8 contests. 

The winner will be alerted via private message in Vaping Underground.

This contest is open to vapers world wide.

Be sure to watch Mod Envy tonight!  We have over $3,000 worth of giveaways.

Mod Envy @ 10pm EST on Novabroadcasting.org


ROLLOUT: THE KRYPTONITE 22650 / 18650 MECHANICAL - $52.24






The true meaning of beauty and the beast.  
A very beautify mod, but massive in size and weight.

The Kryptonite is a thick and heavy duty piece that looks very unique. This mod is made with both Stainless Steel and Brass to achieve an amazing look. It can fit either a 26650 or an 18650 with the provided battery adapter. The pins are silver coated copper for low voltage drop. The top pin is spring loaded that automatically adjusts with your atomizers. This mod weighs over 1lb, so if you're looking into building some muscle while vaping, this mod is for you.

THE HARD COPY:

 -height 114mm
-diameter 34mm
-3mm lower tube thickness
-1.5 upper outer tube thickness
-2mm upper inner tube
-design diameter 36mm
-made of 304 stainless and brass
-2 tone mod for elegant look
-serialize, engraved logo and design
-12 working hours machine work
-positive 10mm silver coated contact
-negative 12 mm silver coated contact
-fits 26650 and 18650 battery
-delrin insulator
-spring loaded auto adjust positive contact
-510 thread
-locking mechanism
-all materials came from solid brass shaft and stainless



WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $52.24
 
 

BIG CAPACITY: VAPPOWER 20 AMP / 5200mAh - 26650 BATTERIES - 2 FOR $22.77





This HUGE capacity battery sports a 20 amp rating.   If you compare these to an MNKE or EFEST 26650 - it has the same AMP rating but sports almost 2000 more mAh.    I bought a few pairs, and word is these hold up to their mAh rating.

These have continues discharge of 20A and burst of 30A.   
Plenty of amperage for the average vaper or sub-ohm vaper.

This pair of batteries include a battery case.


WHERE: >> HERE <<

USE COUPON CODE BLF TO BRING THE TOTAL TO $22.77 FOR 2

FREE BATTERY CASE
 

 

THE NEXT LEVEL: THE 26650 CERBERUS RDA REPLICA - $15.88



http://shrsl.com/?~64b5
http://shrsl.com/?~64b5



The Cerberus is a very versatile atomizer.   Its built as a standard RDA but it also can be a hybrid atomizer to the Hades and King 26650 mechanicals.   This exotic 6 post design allows for maximum built potential and its 6 air holes allow for maximum airflow!  A great atomizer for a great price!


THE HARD COPY:
  • Compatible with 510 drip tip (drip tip sold separately)
  • 6-pole design
  • 6.5mm deep drip well
  • Air flow control, 3 air slits on the sleeve
  • Remove the 510 thread base to expose the hybrid thread.
  • Brass contact (adjustable)
  • Hybrid mod size: 25.8mm
 
WHERE: >> HERE <<
 
$15.88

ROLLOUT: KATO SQUARE MECHANICAL BOX REPLICA - $75.99




With a design reminiscent of the VTR, meet a mechanical with a different look: 
The Kato Square Box Styled 1:1 mechanical mod. 
 
It houses a single 18650 battery and the 22mm ring up top protects your atomizer. 
Contacts, pins and springs are copper and brass. 


THE HARD COPY:
  • Full stainless steel construction-304
  • High quality 1:1 clone mod
  • Copper and brass connectors, pins, and springs
  • 18650 series battery (Two different mods)
  • Laser engraved and etched serial number and logo
  • Full mechanical mod

The diameter of the opening for the atomizer is 22mm

size: 83.6mmx50.3mmx22.8mm



WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $75.99
 

ENTER VERSION 2: THE 4NINE MECHANICAL FROM THE USA - $29.99









Now you can get the 4NINE VERSION 2 replica in Copper, Stainless Steel, or Black PVD.   Each are priced the same at just $29.99. Meet the highly anticipated 4 Nine Mechanical Mod replica; the “most compact mechanical design in vaping”. Three tubes fit together seamlessly to house any 18- series battery.

But here’s the best part: The cleverly designed top cap effectively turns any 510 atomizer into a hybrid by allowing the positive post to directly contact the battery. Cutouts in the tube allow the switch to be recessed but still very easily activated. 


VERSION 2 UPGRADES:
  • ENHANCED TOP CAP WITH LONGER 510 THREADING TO ACCEPT ALL 510 DEVICES.
  • ENHANCED MAGNETS
  • Body and Extension Tubes- Polished Copper
  • Top Cap – Direct 510 Connection with Atomizer to Lower Voltage Drop
  • Bottom Cap – Magnetic Firing Button
  • Can Accommodate 18350, 18490 and 18650 Batteries
  • Fine (0.5mm) Threading
  • Low Voltage Loss


WHERE: >> HERE <<

$29.99 ea

ROLLOUT: THE ASPIRE NAUTILUS MINI - VERITICAL COIL - $29.99 / $18.43






HOT OFF THE PRESS!

You have a choice in price in this deal.   
You can buy a legit version for $29.99 or the 1 to 1 clone for $18.43

THE HARD COPY:

The Aspire Nautilus Mini is the next big thing in the vaping world. This tank system uses a new type of coil technology that ensures proper saturation to the wicking material.. The Nautilus Mini uses a BVC (bottom vertical coil) that allows for much greater vapor production and extremely enhanced flavor. This bottom vertical coil unit is comparable to a stone age cartomizer in a sense that there is no wicking material that goes directly through the coil. The vertical coil is surrounded by wicking material on the outside, thus allowing airflow to be pulled straight through the center of the coil. Though this tank system does not use a dual coil, the vapor production from it tops any dual coil glassomizer that is currently on the market. Another huge advantage to this new coil technology is that the lifespan of the coil is much more exceptional than its predecessors. These new bottom vertical coils are also backwards compatible with the original dual coil units for the Aspire Nautilus, meaning that the old styled coil units will work properly in the Nautilus Mini and the new styled coil units will work properly in the original Aspire Nautilus. Adjustable airflow is almost a must in the vaping world today, and the Aspire Nautilus Mini offers a uniquely redesigned style of airflow control where pre-drilled air holes rotate on a ring that clicks into place for the user’s desired setting. The Nautilus Mini is constructed entirely of Stainless steel, with a pyrex tank section. Each part of the tank system can be disassembled for cleaning purposes also. All in all, the Aspire Nautilus Mini is a tank system that is a thing of pure beauty to witness. 

What’s in the box:

  • Fully rebuildable Aspire Nautilus tank
  • eGo beauty ring 
  • (1) 1.6 ohm dual coil atomizer head (attached in tank) 
  • (1) 1.8 ohm dual coil atomizer head 
  • Instruction manual

WHERE:

($29.99) LEGIT VERSION FROM THE USA: >> HERE <<

($18.43) 1 TO 1 CLONE VERSION - CHINA: >> HERE <<


THE DREADNAUT 26650 HYBRID DRIPPER - $55.10






Its finally here at a great price!  The Dreadnaut replica. This hybrid dripper is a MONSTER.  Taking a 26650 battery.  This a weighty, beefy mod.  If your battery dies the mod itself doubles as a personal protection device.

This thing has to weigh 3-4 lbs.

THE HARD COPY:

  • Hybrid 26650 tubular mod
  • The body is two-toned of stainless steel and brass, with full brass sleeves
  • Compatible with 510 drip tip (drip tip sold separately)
  • Tri-pole design
  • Air flow control (2 air slits on the AFC ring)
  • Deep juice well
  • Thread connected top cap
  • Has a total of 8 parts
  • Spring-loaded bottom firing button, without lock
  • Copper positive contact pin
  • Silver plated negative contact pin
  • With engraved logo and serial number on the firing button
  • Battery tube diameter: 30mm (just the SS tube, exclude the sleeve)

WHERE: >> HERE <<


$55.10


LOWER: EFEST 26650 32A / 64A BATTERIES - $13.90 - FREE SHIPPING



http://myurl.co/efest2660


Hot off the press we have the brand new Efest 26650.   These are the latest incarnation of their 26650 line - now packing a 64A pulse and 32A continues discharge rate.   With the Sony 50A (pulse) batteries discontinued and hard to spot fake MNKE's being sold - these are bound to be a huge hit.  

I got one the other day at a vape meet and they hold up very well.  


THE HARD COPY:
  • Weight: 100g
  • Length: 65.11 mm
  • Diamter: 26.22mm
  • Top: flat top
  • Bottom:non-procted
  • Typical Capacity: 3500mAh
  • Min capacity: 3500mAh
  • Maximum discharging current: 32A
  • Maximum charging current: 6.5 A
  • Maximum pulse discharging current: 64A
  • Resistance: 13±2 mOhm
  • Battery WH: 125WH\Kg
  • Discharge cut-off voltage: 2.5V
  • Voltage: 3.8V
  • Full Charge voltage: 4.2V
  • Monthly Self-discharge rate:
  • Temperature range: Discharge: -20~+60 ºC, Charge: 0~45 ºC

WHERE: >> HERE <<

$13.90 + FREE SHIPPING

THE REVIEWS ARE IN: THE MAGMA RBA REPLICA - $15.79



http://shrsl.com/?~63sv


 
Here is a great deal on the Magma 1 to 1 replica. With tons of airflow provided by nine holes to choose from in a ring on the base, the airflow comes up from the base directly aimed at the coils. A deep juice well traps tons of juice to feed your thirsty build. Slotted posts make building a breeze, and frankly, the images on this look awesome. It appears to be a beautifully crafted replica, well worth the price. Users of the original claim to be very pleased with the performance and flavor, so we've got our eye on this one! It's gonna be big!

WITH 139 REVIEWS IT GETS A 4.8 OUT OF 5

THE HARD COPY:
  • Stainless steel construction
  • 22mm in diameter
  • Two 3.97mm wide poles (screw type - shoot and screw) easier to rebuild and better conductivity
  • New technology - dual DIRECT TO COIL air-hole for maximized flavor and vapor
  • 9 air holes on the outer casing
  • Extended juice basin - can hold up to 40 drops of juice with minimal change of leakage (for a dripper)
  • Poles are welded to the base for durability
  • Positive insulator hidden in the base to avoid melting
  • O-ring less - to make it maintenance free
  • Dome chamber top cap for better flavor

WHERE: >> HERE <<

$15.79

LOWER: A MUST FOR REBUILDERS - CERAMIC TWEEZERS - $11.11





NOW AT A NEW LOWER PRICE.

The photo above is what inspired me to start looking into these.  You see what they are doing?  Making a micro coil right deck of the rebuildable - by firing the PV.  Since the tweezers are heat resistant (ceramic) it gives the user a whole new way to rebuild with ease.

These are very expensive.  Everywhere I looked they were $30-60.00 ea. 
Now they are ultra affordable!

If you rebuild - you need these.


WHERE: >> HERE <<


$11.11

ROLLOUT: THE AEROTANK TURBO - QUAD COIL SYSTEM ( 2 DUAL COIL)





Welcome to the next level!

The largest tank in the Kanger Aerotank line is COMING SOON! Introducing the Kanger Aerotank Turbo! The Kanger Aerotank Turbo has food grade steel and a durable Pyrex glass tank. The enormous tank holds 6.0 mL of e-liquid, so you can vape your favorite e-liquid longer. The Kanger Aerotank Turbo also has two dual coils for a more flavorful vape. The Kanger Aerotank turbo has an improved airflow valve to easily control the vape flow.


Product Details:
  • 2 dual coils
  • 6.0 mL capacity
  • Large adjustable air valve
  • SUS304 grade steel
  • Replaceable Pyrex glass tank
  • Adjustable battery connector
  • Approximately 30mm x 78mm circumference
BEASTLY BECAUSE: The Kanger Aerotank Turbo is a knockout tank! With many improved features, this tank is a must for serious vapers. Make the Kanger Aerotank Turbo your go to tank for some seriously epic clouds of vape and flavor!


MORE INFO: >> HERE <<

BACK IN STOCK: COTTON BACON BY WICK 'N' VAPE - $5.99

BACK IN STOCK AS OF 7/22

http://shrsl.com/?~61wd



The last round sold out within 12 hours...

No boiling necessary, just pinch, rip, wick, and vape! 

This is the slogan of this new style of cotton thats being marketed as the cleanest cotton you can buy.   I have been hearing a lot about this and this merchant has it at a price thats right for any vaper that uses cotton or wants to try cotton.

Its called "Cotton Bacon" because it comes in strips - making it much easier to form a wick.





THE HARD COPY:

Cotton Bacon is the cleanest, best tasting cotton on the market for vaping. It is made by vapers for vapers. This cotton does not add any unwanted flavor to your vape and it wicks incredibly well. Cotton Bacon comes in thin strips so it is virtually hassle free.

Watch the video on their page for the review.


WHERE: >> HERE <<

$5.99



UPGRADE: THE TOBH 2.5 REPLICA LANDS - $14.24





They even cloned #NotaClone

The TOBH version 2.5 is here at a great price.   
For just $14.24 you can get your hands on its latest incarnation. 

It promises to be the best TOBH yet!   


THE HARD COPY:
  • Made with 303 stainless steel one-piece uni-body design
  • Solid copper bottom contact for better conductivity
  • Post holes are .05" to easily accommodate a wide selections of kanthal wire gauges
  • 303 stainless steel sleeve with SIX 1/16 inch holes placed horizontally combines with THREE 1/8th inch holes to create better distribution of air flow across the coils.
  • Stainless finned top cap with a conical internal design to channel flavor.
  • Deep laser engraving on the sleeve that will not polish off
  • Serialized and laser engraved #NotaClone

WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $14.24