We have been pimping a lot of 101vape lately and for good reason. Their prices are the cheapest your going to find inside the USA. If they keep setting them up, ill keep knocking them down.
One of the most anticipated rebuildables to hit the scene! Get yours at the a great price!
The Aqua is a Kayfun Style system with 4 wicking channels for dual coil builds.
THE HARD COPY:
Specifications:
- Made with SUS 316 Stainless Steel
- 4-Channel dual coil capability
- Bottom feed silica tank atomizer
- Brass contacts
- Two unique drip tips
- Hybrid connector for the Origin mod
- 510 base connection
- 21mm
WHERE: www.101vape.com
$29.99
Love them or hate them you have to admit that Fasttech has the best selection of mods on the planet. Its no wonder why many websites and B&M's buy and resell from them. Here is a prime example of hot mechanical replica - hot off the press.
It's a stainless steel telescoping
mod with brass contacts and a floating center pin. The bottom firing
button has a reverse-threaded locking ring, and the top cap has air
channels cut in the top.
- Top cap with air-channels cut
- Telescopic tube
- Floating 510 center pin
- Laser engraving logo on the body
- Unique serial number
- Brass contacts
- Bottom spring-loaded firing switch
- Reverse threaded locking ring
- 3 vent holes
- Recessed 510 connection
- Houses single 18350/18500/18650 battery (batteries sold separately)
WHERE: http://www.fasttech.com
$17.49
Its Christmas Eve - so why not roll out a very interesting mod.
This mod is by KYX and its called the E-LVT. Its a Waterproof / Pressure resistant variable voltage / wattage mod. Small LED light on the bottom of the mod. The manufacturer told me they will take an 18650 battery. You can also use this to recharge other devices via a USB cable.
VAPE IN THE SHOWER! :D
WHERE: https://www.alibaba.com
Here are some new battery cases that came out a few weeks ago. These hold 4 x 18650 batteries - double what the normal battery cases hold. These also have a reinforced latch to prevent accidental openings.
THE HARD COPY:
- Can hold 4*18650 batteries
- Safe guards your battery from short circuiting and other hazards
- Light weight and compact size to better organize your battery and take it easily while in traveling
WHERE: http://www.fasttech.com
$2.94 for 2 Cases
Every year the Ashtray Blog has the top bloggers in the industry give their predictions for the next the year. This year I was picked and submitted a few paragraphs. I am honored.
THE HARD COPY:
Last
year we invited some of the top ten vaping bloggers to share their
predictions for the future of vaping. This year we have got a mix of
last’s years bloggers (interesting, as several look back at their predictions for 2013) as well as some new personalities to get some new points of view.
Let’s see what they think is going to happen in 2014… and don’t forget to share your own predictions in the comments!
WHERE: http://www.ecigarettedirect.co.uk/
Here is the replica of the Fatty v3. What is so special about this dripper? This particular dripper has the a reservoir that an accommodate up to 15-20 drops of liquid without leaking. These have a very wide chamber design which allows the juice to flow easier.
The Forums have confirmed these are made by HCigar.
THE HARD COPY:
- Dripping atomizer
- Stainless steel construction
- Threaded top cap
- Laser engraving 'Chris Creations' logo
- Liquid reservoir located on the deck
- Bottom fed air flow control
- Comes with some spare parts
$10.52
 |
MNKE 18650
|
One of the best batteries money can buy! The MNKE 18650 battery. Perfect for all regular and sub-ohm uses. One of the battery darlings of the sub-ohm community.
The price is INCREDIBLE from a USA shipper
THE HARD COPY:
MNKE IMR 18650, 1500mAh, Flat Top
MNKE batteries are the definitive battery for the mechanical-mod
user. Not only are these the safest batteries available, they also
perform better for a longer period of time. The high amp-limit on these
batteries means you can build sub-ohm coils without fear of the
batteries venting. Although these are 1500mAh batteries, they can hold a
charge above 3.7-volts for much longer than other IMR batteries, which
means hours of use before a noticeable difference in voltage compels a
battery change. These batteries will perform just as well in an APV or
Variable Voltage/Variable Wattage mod, although the advantages won't be
as apparent. If you like to build your own sub-ohm coils on a mechanical
mod, you won't believe the performance and battery life these cells
offer.
Specifications
Brand Name: MNKE
Size: 18650
Model: MNKE18650A
Type: Li-Mn (High Drain)
Rated Capacity: 1500mAh
Nominal Voltage: 3.8V
Peak Voltage: 4.2V
Dimensions: 18.3mmX65mm
Rechargeable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Orange
Rated Capacity: 1500mAh
Maximum pulse Discharging Current: 60 A
Maximum Continuous Charging Current: 6.5 A
Maximum Rated Discharging Current: 20 A
Nominal Voltage: 3.8 V
Maximum Charge Voltage: 4.2±0.05 V
Temperature Range/Discharge: -20~60 degrees
Temperature Range/Charge: 0~45 degrees
Temperature Range/Storage: -20~35 degrees
Internal Resistance at Shipping: 23±1 mΩ
Weight: 40.5±1 g
WHERE: http://www.101vape.com
$6.99
This rebuildable dripping atomizer is ideal for ribbon wire builds with its
slotted posts. Other features include a great adjustable airflow and
ceramic base. Constructed of stainless steel with an aluminum sleeve to control airflow.
THE HARD COPY:
- Double air holes
- Ceramic base and tiny screw
- Stainless steel posts
- Pre-assembled heating coils resistance: 1.0ohm
WHERE: https://www.fasttech.com
$17.39
101vape is running a crazy year end sale!
Time to clean house and sell some products at a great price!
101vape already has low prices, this is just icing on the cake!
There is something for everyone. Check it out and save!
WHERE: http://101vape.com/