This time its Vaporcrypt.
This isn't as vague a reason as the others. I took a look at Vaporcrypts
website and they are selling full out Hana Clones for $120.99 - logo and all. They don't even try and hide it.
I have a feeling they don't know they are being sued yet - because its still being sold on their site.
Wouldn't suck to find out your being sued because Vaporjoe told you?
I still think it could have been avoided with a simple phone call.
MORE INFORMATION: >> HERE <<
Simple and elegant this mechanical set is steal! This mod comes in full copper with a full compliment of tubes.
The minimalistic nature of the top cap and switch makes this mod a very very attractive piece.
THE HARD COPY:
- 1:1 clone
- Copper construction
- Without 510 center pin, so your atomizer will connect directly to the positive pole of the battery
- Custom hybrid connection on the top, when you connect any atty to the mod it gives a hybrid look
- Bottom spring-loaded firing switch, without lock
- 18350 + 18500 + 18650 full set battery tubes
- With laser engraved logo on each tube
- We recommend you to use a button top battery with this mod. Flat top batteries may cause the mod to short and ruin the magnet
WHERE: >> HERE <<
$27.61
SHIPS FROM THE USA!
These sell out every time I put them up. As I explained on the Mod Envy show - these are fantastic!
I have eight legit DNA 20 / 30 mods and I see ZERO difference between them and this mod.
The logo-less 30 watts in an aluminum box are now back in stock! These are ready to ship and NOT a pre-order! Get on it while they are in stock. They wont last long!
- Compact size ~ 3.1" x 2.1" x 1" Aluminum body
- Custom milled display screen with a flush fit to the outside of the box
- Flush 510 connector
- Flush dome style Fire Button
- 7 - 30 watts
- 4 - 8.3 volts
- 0.3 - 3.3Ω Atomizer Resistance
- On-board USB
- LED shows Red while charging and Green when fully charged
- Micro USB charger & dust cover included
WHERE: >> HERE <<
$69.99 + FREE SHIPPING
The first versions have shipped.
Looks pretty damn close to the original.
....enjoy
So you wanted to try Japanese cotton but you didn't want to commit to a large amount?
Here is your chance.
Welcome to the wonderful world of the ultimate wicking cotton. This
cotton by Cotton Labo Japan is 100% pure, 100% organic, and 100%
natural. Cotton Labo Organic Cotton is the absolute best cotton for RBAs
and RDAs due to its superb capillary functions and retention of even
the thickest E-liquids. With minimal manipulation to the original
material, zero bleaching/dye processing, no pesticides, and no
additional agricultural chemicals this cotton brings out the truest
flavors of your favorite E-liquid from the very first hit. With this
cotton you will be able to taste a variety of notes and nuance in your
favorite E-liquid that you’ve barely noticed before. This wicking
material will truly ensure that you stay well and vape well.
WHERE: >> HERE <<
$2.00
Packing a nice amp rating and a very high mAh value - these Efest are perfect for those that use the DNA20 / DNA30 style mods and or moderate sub-ohm builds. There is a give and take when it comes to batteries. More amps = less mAh. This battery gives the average vaper the protection of a nice amp limit with the mAh value that lasts.
I will be replacing ALL my DNA20/30 devices with this battery.
Specifications:
- -Size: 18650 (18mm diameter / 650mm long)
-Type: Li-Mn
-Rated Capacity: 3100mAh (High Drain)
-Nominal Voltage: 3.8V / Peak Voltage: 4.2V
-Rechargeable: Yes
-Protected: No
-Style: Flat Top / Color: purple
-Maximum Rated Discharging Current: 20A
-Maximum Charge Voltage: 4.2V
-Weight: 50g
WHERE: >> HERE <<
You knew it was coming,
and now it's here. The replica of the infamous Manhattan mechanical mod
is now available in three new finishes. Features include a strong magnetic bottom-firing switch, brass contacts,
and a floating positive pin. Best yet, you can get it for a very low price.
THE HARD COPY:
- 510 threading connection
- Floating 510 center pin
- Brass battery contacts
- Bottom magnetic firing button, without lock
- Inner diameter: 18.5mm
- With logo engraving
- Houses single 18650 battery (battery sold separately)
The Tobeco Coil Jig is a must have for perfect and consistent coils.
This Tool will assist in your coil building, wrap different diameter coils with the included posts.
Tobeco Coil Jig Features:
- 3/64; 1/16; 3/32; 1/8; and 9/64 posts for building coils
- 510 threading on the side of Jig to use as an Atomizer stand
- Nylon thumb screws
- Built in Compartment to store building posts
WHERE: >> HERE <<
$8.99
Black and silver are the only colors in stock
What do you get when you mix Chinese prices with an American Warehouse?
ANGELCIGS!
Angelcigs is one of a new breed of Chinese vendor that is warehousing product in the USA so they don't have to deal with delays and customs. A brilliant idea. All your favorite devices are now shipped directly from USA at very very low prices.
They also have a great shipping policy. If its over $15.00 - it ships free!
They also have great hourly deals!
AMERICAN WAREHOUSE: >> HERE <<
They also have a German warehouse for those in Europe!
The Plume Veil RDA replica has been making its rounds for the last few weeks all over Facebook and eBay. Today it drops at an incredibly low price in new finishes. At about $2.00 over cost - your not going to find it cheaper.
THE HARD COPY:
- Copper or Gold Plated Construction
- Removable 510 drip tip
- Unique design with three separate sources for airflow:
- Air Slots in front of coil, with AFC
- Air holes through negative posts to bring air to back side of coil
- Air holes in top of cap to create a vacuum effect
- Negative posts are milled into the deck
- Deck is gold plated stainless steel
- Delrin insulator at drip tip (also serves as AFC for top air holes)
- Rotating "T" center post to accommodate a multitude of different builds
- Post holes size: approximately 1.7mm
- 22mm external diameter
- Height without drip tip: 29.5mm
- Laser engravings
- 510 threading connection
