The Fogger Tank V4 is a new and improved version of the Fogger tank
series. This rebuildable bottom coil atomizer has been redesigned with
an improved wicking system and airflow control. The Fogger Tank V4 has
four wick slots, two posts with no lead holes and 2 air holes at the
base of the atomizer for adjustable airflow.
Product Features:
- Dual coil system
- 2.0 mm fill hole
- 2 air control holes
- 2 posts
- Distance between posts: 7.2 mm
- Adjustable connection pin
- 6 mL tank
- Pyrex glass tank
- Stainless steel material
- Connecting positive post is made from copper
- Bottom feed filling
- 510 drip tip
- 510 mod connection
Package Contents:
- 1 x Fogger Tank V4
- 1 x screwdriver
- 4 x wicks
- 1 x resistance wire
- 2 x O-rings
- 3 x extra screws
WHERE: >> HERE <<
USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $17.95
Here is the second incarnation of the Sigelei 100 watt box mod. There are some minor internal fixes, a lower price, and finally a magnetic back cover.
THE HARD COPY:
- Variable wattage: 10.0-100W (10-50W in 0.1W increments, 50-100W in 1.0W increments)
- Lowest atomizer resistance: 0.15ohm
- Battery voltage operating range: 6.4-8.4V
- Quickly press 5 times to turn On/Off
- 0.95" OLED display: resistance, voltage, wattage, battery level
- 510 threading connection (floating copper center pin)
- Copper battery contacts
- Powered by 2*18650 batteries (batteries sold separately)
- Lock/unlock function: when system is locked, the device doesn't work
- Low resistance protection (< 0.15ohm)
- Low voltage protection (input voltage < 6.4V)
- High voltage warning (high battery input voltage: > 9.0V)
- High temperature warning
- Reverse polarity protection
- Short circuit protection
- Magnet back cover
WHERE: >> HERE <<
MOBILE USERS CLICK: >> HERE <<
$79.35
CLT RDA V3 by
Infinite is the third RDA that is developed by Infinite. The CLT RDA V3 features double heat fins, a huge drip tip that will deliver vapor
without restriction. The top cap is redesigned with a removable new
large drip tip with a wide bore. Side Airflow Holes are extended to an
impressive 10mm wide. The negative posts have
airflows coming in from the side to give you additional airflow to your
negative coils. The position of the airflow is at higher on top of a
deeper well deck so it will not leak from the side airflow. This RDA is
definitely an Original & Affordable RDA, the vapor and flavor
produced from this RDA is one of the best among even the high end RDAs!
THE HARD COPY:
304 Stainless Steel construction
22mm diameter
Full Brass adjustable contact pin
Heat diffusion sinks or Fins
Welded/Built-in one piece posts
Unique Infinite vortex or tornado design airflow
Deck well: Milled 4 mm in depth
2.0mm positive center post
1.8mm negative post
Conical Top Cap
510 thread connection
WHERE: >> HERE <<
$28.89
So whats the big deal with these bottles? These bottles have been extremely hard to find due to their popularity -- thus the name "Unicorn Bottles". What makes them popular is that they are the same exact size as a 22mm mod so they fit in all mod stands. This is great for those that want to organize juice or put a bottle in a car cup mod holder. The dropper is a precise dropper making it easier to put on rebuildables or refilling tanks.
Some vendors are trying to charge people $4.00 EACH for these. FUCK THAT!
Time to put an end to that shit.
WHERE:
BLACK CAPS: >> HERE <<
WHITE CAPS: >> HERE <<
$2.83 for 5
Here is a super great deal on the Cool Fire 1 kit. This mod is great as a starter device or an all around portable device. The cool thing about this device is it always fires at 8.5 watts. No settings, No extra buttons. It comes with an iClear30S. The iClear alone was more then $18.00 when it came out.
The Innokin Coolfire 1 Mod delivers more power than a standard 3.7
volt device. It marries the simplicity of a single button mod and the power
of a variable wattage device. It's simple, elegant, powerful, and
affordable!
Product Features:
- Stainless steel Coolfire 1 mod
- Delivers 8.5 watts
- Reverse battery protection
- Built in 7A fuse for protection and stability
- Short circuit protection
- ON/OFF battery switch
- LED battery power display
- Low voltage warning
- 10 second cutoff
- Well vented for safety
- High compatibility 510 connection
WHERE: >> HERE <<
USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $18.00
If you love the Magma RDA then your going to love the version 2. This is built from the ground up for flavor.
Its made for dual and quad coil builds. Comes with all three rings.
THE HARD COPY:
- 1:1 clone
- Stainless steel + POM 510 drip tip
- Quad posts for dual coil build
- New technology - quad DIRECT TO COIL air-hole for maximized flavor and vapor
- Air flow adjustable, with AFC
- Height excludes drip tip: 37.7mm
- Diameter: 22mm
- 510 connection (fixed silver plated copper center screw)
$14.74
BACK IN STOCK AS OF 2.5.2015
These went out of stock quick the first time around.
The Smoktech version of the Kanger Subtank / Aspire Atlantis has landed at a great price!
The Vapor Chaser
Tank (VCT) is a newly designed affordable and performance oriented
sub-ohm tank system that is now part of our Sub-Ohm Tank lineup. The VCT
features the Smoktech's revolutionary ALF (Adjustable Liquid Feed)
system, which allows users to adjust the juice flow to fit their desired
level. With the included glass wide bore drip tip, users now can lung
inhale with ease and to increase vapor production.
Note: Smoktech VCT A1 Sub-Tank replacement coil head is 0.5 ohm. Please use a device capable of handling such ohm level.
Product Features:
- Ultra durable Stainless Steel and Pyrex Glass Construction
- New adjustable airflow control for superior airflow delivery
- Innovative coil design with Organic Cotton Coil that is more environmentally friendly and cleaner taste
- Smoktech VCT A1 Sub-Ohm Tank is capable of holding 3.8ml of juice
- Smoktech VCT A1 uses single vertical coil with revolutionary ALF (Adjustable Liquid Feed)
- Comes with both 0.5 ohm and 1.2 ohm coils
- 510 connector
- Made out of 304 Stainless Steel
- New Organic Cotton Coil Head
- Organic Cotton Made in Japan
- 1 Wide Bore Glass drip tip is included and also compatible with all standard 510 drip tips
- Diameter: 22mm
Product Includes:
- 1 x Smoktech VCT A1 Sub-Ohm Vapor Chaer Tank
- 1 x Wide Bore Glass Drip Tip
- 1 x Sapre Pyrex Tube
- 1 x Organic Cotton Coil: 0.5 Sub-Ohm
- 1 x Organic Cotton Coil: 1.2 Ohm
- 1 x Smoktech Gift Box
WHERE: >> HERE <<
USE COUPON CODE JOE10 TO BRING THE TOTAL TO $22.49
ALL ORDERS GET A FREE BOTTLE OF MILLENNIUM JUICE
It's obvious why they call this the Derringer RDA. Its small and gets the job done - just like the handgun. This RDA comes with All 5 caps so it will match most mods thrown at it. Even though its a smaller RDA its still 22mm to fit flush.
THE HARD COPY:
Derringer Features
- INCLUDED Top Caps: White, Black, SS, Copper, Brass
- Diameter: 22mm
- Height: 23.5mm
- Weight: 70g
- Material: 304 Stainless Steel
- Air Flow Control: Dual or Single
- Negative Posts Milled to Deck
- Delrin Drip Tip
- 2mm Post Holes
- Beautiful Engravings
WHERE: >> HERE <<
MOBILE USERS CLICK: >> HERE <<
$13.45
The iPV Mini 2, integrated with the SX330V2C chip is not only made to
fire the most popular atomizers in the market, but does so with the
power and flexibility to cater to cloud chasers!
The iPV Mini
2 70 Watts Mod by Pioneer4you features authentic YiHi SX330V2C chip
that allows the device to regulate, and push out as much as 70 Watts of
power! The voltage output from this mod ranges anywhere from 3.6 volts
to 8.5 volts and the wattage output ranges anywhere from 7 watts to 70
watts. The iPV Mini 2 70 Watts Mod comes with a USB port which makes for
easy charging, the optional replacement 18650 battery can also be used
to replace your battery by removing the back panel. The safety features
on the iPV Mini 2 70 Watts includes output short circuit protection,
reverse battery protection, low resistance warning, low voltage warning,
and high input wattage warning. The iPV Mini 2 70 Watts Mod has a
standard 510 connection with a floating center pin to ensure all RDAs,
RBAs will fit flush on this small mod. This mod is perfect to power your
Aspire Atlantis, Kanger Sub-Tank or your favorite RDAs!
Product Features:
- Portable & Powerful
- Great to power your Aspire Atlantis, Kanger Sub-Tank or your favorite RDAs!
- Standard 510 connection and threading
- Loading resistance: 0.2 ohm - 3.0 ohm
- Output Voltage Range: 3.6 V - 8.5 V
- Output Wattage Range: 7 W - 70 W
- Authentic YiHi SX330V2C Chip installed
- Floating Center Pin
- Visual operating system
- Low voltage protection
- Low resistance protection
- High input voltage warning
- Output short circuit protection
- Reverse battery protection
- Dimensions: 3-3/4"L x 1-9/16"W x 7/8"
- Utilizes one 18650 battery (Removable and Sold Separately)
WHERE:
BLACK: >> HERE <<
SILVER: >> HERE <<
USE COUPON CODE JOE10 TO BRING THE TOTAL TO $62.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE
Innokin has launched the 4th incarnation of the MVP coming in at a "staggering" 30
watts. Oddly they are calling this the MVP 3 - even though its the 4th
version of the MVP.
I have no idea what is going on with Innokin but they are REALLY behind the times. In the past I really thought of Innokin as pioneer. They didn't clone products - they walked their own path with really innovative mod designs. Their last 3 major mod releases bombed terribly and they are pushing for a forth. They seem out of touch and aren't paying attention anymore.
No one is going to pay those prices for a 30 watt box mod from China. A year ago yes - now? No way.
With that being the internet price - you know B&M's are going to try and sell this for $99.00 or more. FAIL!
I can easily rattle off many 30 / 40 watt devices that are under $39.00 (The Kanger KBOX 40 watt mod for $31.00) and actually use real 18650 batteries - rather then a LiPo battery bag. To Innokins credit it does have a large 3800mAh battery but the tech is dated and the design is tired. Its like putting a very large gas tank on a Ford Pinto.
For that price this box should be AT LEAST 50 watts and have a fresher look.
I really hope they wake up soon.
