TWO LG 18650HE4 20/35A 2500 MAH 18650 BATTERIES - $13.35

These are the upgrade to the 18650HE2's that are very popular.

These are monster batteries. These 18650s have a 20/35-amp continuous discharging rate, which is perfect for sub-ohm builds. With a mAh rating of 2500mAh, these will outlast and outperform any other battery on the market.

• Typical capacity: 2500 mAh
• Nominal voltage: 3.6V
• Cut off voltage: 2.5V
• Continuous maximum charge current: 4A
• Continuous maximum discharge current: 20A
• Maximum discharge current: 35A

WHERE: >> HERE <<

$13.35 a pair + case + free shipping

REPLICATED: THE PHANTUS MINI - $29.67

A very portable mechanical mod The Phantus mini can house a 22mm tank or use the spacer (shown) to use things like RDA's

It accepts one 18350 battery and the 510 connector sits recessed into the mod. It fits 22mm Tanks and Atomizers inside the device for a super small form factor. 

THE HARD COPY:

• 510 threading connection, brass center pin
• Fits 22mm diameter and smaller atomizers
• With window cut for juice and airflow check
• Comes with a placeholder (extension) for top mounting
• Top spring-loaded firing button, with reverse-threaded locking ring
• Houses single 18350 battery (battery sold separately)

 

WHERE: >> HERE <<

MOBILE USERS CLICK: >> HERE <<

$29.67

 

 

 

BLACK EDITION: THE SWIRLFISH RDA - PROJECT SUBOHM - $26.99

The SwirlFish™ RDA by Project Sub-Ohm™ was designed with the explicit goal of maximizing end user experience, and through a developmental and design process this goal has been achieved without compromise. Foundationally designed with airflow variance, airflow variability, and airflow location being foremost in user experience, the SwirlFish™ features this to the utmost. Two pairs of airflow points, one pair being in close proximity to the coils and another pair providing auxiliary turbulence, create a layered swirling effect, increasing flavor and vapor production. Each airflow pair also features incremental sizing differences, with airflow rate and amount being a key element. The triple diagonally slotted side airflow are fully adjustable, with the range to be run from just a single slot for maximal flavor all the way to completely open, providing more than ample airflow. Top airflow features a pair of three strategically placed airholes, also with three distinct sizes, with a top airflow ring providing easy adjustment. The SwirlFish™ was the designed with the flexibility and intent to either be run with the two airflow pairs working in conjunction, or for either to be run independently and singularly from each other, creating truly a complete RDA. A split positive post design ensures an easy and convenient building platform, with ample space that can cater to the plethora of build variance. A 5mm juice well provides fantastic longevity and more than adequate juice and wick capacity. Manufactured out of 304 Stainless Steel with the negative posts deck milled and featuring a fully adjustable Silver Plated Copper Contact, the SwirlFish™ is manufactured both to last and to perform. Truly in a class of its own and at a price point that places it among the top of must-have RDAs, Project Sub-Ohm™ presents the Project Sub-Ohm™ SwirlFish™. Get Ready To Swirl.


Product Features:

• Two airflow pairs featuring full adjustability and size variance for maximum swirl effect
• Triple diagonally slotted side airflow features three distinct sizes
• Triple top airholes also features three distinct sizes
• Complete airflow range to be run in conjunction or independently
• Dual Split Positive design enables easy and hassle free building
• Deep Juice Well
• Machined out of 304 Stainless Steel
• Negatives are deck milled for maximum durability
• Fully Adjustable Silver Plated Copper contact for top tier conductivity
• Iconic Project Sub-Ohm™ Engraving
• Individually Serialized
• 100% Designed, Engineered, and Developed in the USA by Project Sub-Ohm™!

Product Specifications:

• 22mm Diameter
• Diagonal Airflow Measures 7mm long
  • 1mm, 1.5mm, and 2mm sizing
• Top Airflow
  • 2mm, 1.2mm, and 1mm sizing
• 5mm Deep Juice Well
• 3mm Negative Post Holes
• 2mm Positive Post Holes (each)
• 304 Stainless Steel Construction
• Silver Plated Copper Contact

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE

LOW: KENNEDY VERSION 2.5 STYLED RDA - $13.39

The airflow runs from under the deck to within millimeters below the coils. Providing excellent flavor and a dense vape. No more adjusting the airflow on the top cap. The juice well is far deeper than traditional atomizers which allows for less dripping between vapes. The post holes easily accommodate 20 gauge builds. The posts are secured by Philips head screws and the center post made of pure copper. If you are looking to drip less, get better airflow and flavor without having to go to a tank, this is the perfect atomizer for you.


THE HARD COPY:

• Stainless steel wide bore drip tip (14mm)
• Bottom air flow control system
• Ultra deep drip well to prevent e-liquid flooding (but please DON'T drop too much e-liquid at one time)
• Triple posts design
• 510 threading connection (copper center pin)
• 22mm diameter
• Height without drip tip: 34.5mm
• Engraved logo

WHERE: >> HERE <<

MOBILE USERS CLICK: >> HERE <<

$13.39

LOW: THE KANGER KBOX - 40 WATT BOX MOD + FREE JUICE - $26.99

 

The newest mod from Kanger - the Kanger Kbox. This is a 40 watt box mod coming in at a great price! Not only is a great price - it looks great!   

I own one and I love it.  Works like a charm!
  
THE HARD COPY:

• Made from aluminum
• Variable Wattage from 8 – 40 watts
• Requires a 20A 18650 battery
• Fires down to 0.4ohms
• 510 Connection
• Short Circuit Protection
• Overcurrent Protection
• 10 sec cut-off
• Replaceable Cells
• Battery capacity indicator
• Height: 89mm
• Length: 40mm
• Width: min 20mm, max: 25mm

WHERE: >> HERE <<  

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99
ALL ORDERS GET A FREE 10ML BOTTLE OF MILLENNIUM JUICE 

 

LOWER: THE KANGER SUBTANK PLUS - $32.35

THESE ARE IN STOCK - NOT A PRE-ORDER

Introducing the Sub-Tank Plus, the newest generation of the highly acclaimed Sub-Tank series! The Sub-Tank Plus now can be filled with up to 7 mililiters of juice, as well as integrating new dual slotted adjustable airflow for an even wider range of airflow options! The 510 contact has been redesigned and now utilizes a set, non spring-loaded contact. Although tank capacity has been increased, overall dimensions remain the same, providing even better efficiency. The Sub-Tank Plus also has a redesigned chimney and RBA head, removing the need to switch the chimney and top when using either coil systems, and allowing for the RBA head system to utilize the same amount of tank capacity! A new drip tip is also included, shortening the overall profile while offering a cleaner, minimalist look. Experience the freedom to switch between Kanger's newly designed Organic Cotton Coil Heads (OCC) and a new rebuildable atomizer head! Each OCC are made out of organic cotton producing better flavor and a cleaner taste. Easily switch from set coils by simply replacing your coil heads to the RDA head which you can build to your own desired level!


Product Features:

• Ultra durable Stainless Steel Construction
• New dual slotted adjustable airflow control for superior airflow delivery
• New OCC (Organic Cotton Coil) head for better flavor and cleaner taste
• Kanger Sub-Tank Plus is capable of holding 7 ml of E-Juice
• Set 510 connector
• Length: 55mm (Without drip tip)
• Diameter: 25mm

Product Includes:

• 1 x Kanger Sub-Tank Plus
• 1 x OCC: 0.5 Sub Ohm / Range 15 - 30 W
• 1 x OCC: 1.2 Ohm / Range 12 - 25 W
• 1 x RBA Head
• 1 x Screw Driver
• 2 x Screws
• 1 x Spare Pyrex Tank
• 1 x Organic Cotton Pad

WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $32.35

LOWEST PRICE: THE AUTHENTIC COIL MASTER V2 - FOR JUST $13.75

COIL WITH EASE! – Coil Master v2 5-in-1 Coiler from USA!

 

Version 2 are in stock - not a pre-order!


THE HARD COPY:

We’ve seen a lot of coilers hit the market lately, but nothing as elegant and versatile as the Coil Master. Available in three bold colors: black, red, and blue, the Coil Master offers a clever 5-in-1 design that gives you the ability to create perfect 1.0, 1.5, 2.0, 2.5, and 3.0 mm coils with the greatest of ease. Different setup options even allow the use of varying wire gauges without sacrificing coil quality. Never fuss over a great build again! The Coil Master will help you build uniform, even coils like a pro, and is exceptionally easy to use. See for yourself in the instructional video we’ve included below…

Best yet, you’re getting a great value, with the most options, and NOT waiting for it to cross an ocean from China.



WHERE:  >> HERE<< 

$13.75

WHILE THEY LAST: THE REBUILDABLE ASPIRE ATLANTIS HEAD - $14.99 + FS

The last time I put these up in prime-time they sold out in under an hour.  By putting this deal  up in the afternoon I think I give everyone more of a shot of getting one.

The Aspire Atlantis is a big hit with the community but it never shipped with a rebuildable head (like the Kanger subtank).   Now you can get your hands on an easy to build Atlantis head for just $15.99 + Free Shipping.   A steal of a price for never having to buy replaceable heads again!

WHERE: >> HERE <<

$14.99 + FREE SHIPPING

HOT: THE CHERRY BOMB STYLED MECH BOX MOD - $37.54

The Cherry Bomber Styled mechanical mod houses single or dual 18650 batteries in a gorgeous aluminum body with attractive detailing. It’s a parallel setup, giving you plenty of power to drive your favorite build, and a conversation piece to boot. The copper contacts are floating and adjustable. It’s a true mechanical, with no wiring…. even the battery contacts are fully adjustable with no springs.



THE HARD COPY:

• Aluminum body and sliding door
• Full mechanical mod
• Brass firing pin
• Adjustable battery contacts

WHERE: >> HERE <<

MOBILE USERS CLICK: >> HERE <<

$37.54

HOT: DARK HORSE RDA WITH CARBON FIBER - $9.85

Among the top-rated atomizers for performance and flavor, stands the Dark Horse Styles. This particular version features a carbon fiber accent airflow control ring, with the distinctive horse motif. It’s a simple but effective three-post design with large drilled square posts to make more aggressive builds with heavy or twisted wire easy to do. The delrin top cap piece helps to insulate your drip tip and keep things cool. Varying large slots in the cap allow you to get exactly the airflow you desire. Constructed primarily from stainless steel, with brass and carbon fiber components.


THE HARD COPY:

• Stainless steel 510 drip tip, removable 
• Tri-post design for single/dual coil build
• Posts material: Stainless steel + brass
• AFC ring material: brass + carbon fiber
• Air flow adjustable, 6 air holes on the ring
• 510 threading connector, adjustable brass 510 center pin
• 22mm diameter
• Height without drip tip: 33mm

WHERE: >> HERE <<

MOBILE USERS CLICK: >> HERE << 

$9.85