Angelcigs is back with a new round of clearance items!
Angelcigs is having a massive
clearance sale. There are 2 pages worth of RDA's and Mods at rock
bottom prices! Some are as low as $4.00 ea. All items are shipped from the USA - So no waiting on China!
Check it out and save big!
WHERE: >> HERE <<
The last of the old timers has been cloned. The Reo has been around long before I vaped and started the "squonking" craze. It was never cloned in years past because bottom feeders weren't hugely popular. Now they are making a come back and the Reo grand clone proves it.
Its a very simple design. A mechanical box mod with a 6ml bottle fed by a tube into a bottom fed atomizer.
THE HARD COPY:
REO 18650 (Grand) style mechanical box mod
A personal vaporizer milled out of block aluminum
100% mechanical
One nearly indestructible unit that can take a beating,.
Carries a 6ml bottle on board that holds your e-juice
Uses a single 18650 battery.
WHERE: >> HERE <<
USE COUPON CODE MAXY TO BRING THE TOTAL TO $24.08
SHIPS FREE FROM THE USA!
The Black always sells out at this price so when they go back up - I have to re post it.
The IPV4 100 Watt box mod needs no introduction. Currently one of the hottest selling box mods. This is an ungodly low price and when you factor in the free shipping.
THE HARD COPY:
- Chip: YIHI SX330-V4S
- Temperature control
- Dual mode, power mode and joule temperature control mode
- Upgrade available
- Resistance reads down to 0.1 Ohm
- Adjustable wattage: 5W - 100W
- Supported pass through mod
- Take 2 x 18650 batteries (not included)
- Fully magnetic door
- Auto ohm resistance meter
- Voltage is calculated automatically as wattage is adjusted
- Mini USB interface charging port
WHERE: >> HERE <<
USE COUPON CODE IPV4DEAL TO BRING THE TOTAL TO $68.39
THIS ORDER SHIPS FREE FROM THE USA
One of the best rebuildable kits I have seen for the money.
You get everything you need in a nice zip case!
WHATS INCLUDED:
- 1*2-in-1 Combo Tester (Ohm Meter + Volt Meter)
- Connection: 510/eGo
- On/Off switch
- It reads from 0.01 to 9.99 ohms
- It reads from 0.01 to 9.99 volts
- Accurate to ±0.4%
- Powered by 2*AA batteries (batteries sold separately)
- 1*CW-20 2mm Coil Jig
- 1*CW-25 2.5mm Coil Jig
- 1*CW-30 3mm Coil Jig
- 1*1*Long Nose Pliers
- 1*Wire Cutter
- 1*Pointed Tip Tweezers
- 1*Curved Tip Tweezers
- 1*Multi-Bit Screwdriver
- 1*Scissors
- 1*Plastic Storage Box (6 segments)
- 1*Lint Carrying Pouch
- 1*Zipper Case
WHERE: >> HERE <<
$33.27
These are the upgrade to the 18650HE2's that are very popular.
These are monster batteries. These 18650s have a 20/35-amp continuous
discharging rate, which is perfect for sub-ohm builds. With a mAh rating
of 2500mAh, these will outlast and outperform any other battery on the
market.
OVER 1,100 SETS SOLD!
- Typical capacity: 2500 mAh
- Nominal voltage: 3.6V
- Cut off voltage: 2.5V
- Continuous maximum charge current: 4A
- Continuous maximum discharge current: 20A
- Maximum discharge current: 35A
WHERE: >> HERE <<
$11.99 + CASE + FREE SHIPPING
The one that everyone has been waiting for...
See this is why you have to wait for Vaporjoe. All you people that pre-ordered, paid more, and don't even have them yet. Now lets see what other "deals" sites follow my lead :)
The iPV3 Li V2 by Pioneer4you is one of the most feature packed box mods
in today's market, combining 165 Watts of adjustable power, temperature
control functions, and a ball locking sliding door, all at an
incredible price! Utilizing two 18650 batteries
(not included) , the iPV3 Li V2 uses a YiHi SX330V3SL Chip, providing
incredible accuracy and range, firing resistances from 0.1 to 3.0 ohms
with adjustments from 10 to 99.9 Watts in increments of 0.1 Watts, and
100 to 165 Watts in increments of 1 Watt. With efficiency ratings of
over 95%, the iPV3 Li is truly the current pinnacle of regulated box
mods. Fully integrated temperature control is also present, with
adjustments from 212 to 572 degrees Fahrenheit, firing temperature mode
resistances down to 0.05 ohms. Manufactured out of Aluminum, the iPV3 Li
V2 features a dovetail sliding door with a ball locking mechanism. A
spring-loaded brass 510 connection makes adjustment and atomizer
connection consistent and hassle free. Utilizing the Micro USB port,
user's will also have the opportunity to upgrade the iPV3 Li V2 to 200
Watts once the firmware update becomes available.
Product Features and Specs:
- Billet Aluminum body
- YiHi SX330V3SL Chip
- Utilizes two high amp 18650 batteries (sold separately)
- Three button design
- Micro USB port for updates
- Dovetail Sliding and Ball Locking Door
- Brass 510 spring loaded connection
- Output wattage range of 10w-165w
- Atomizer Resistance: 0.10 ohm - 3.0 ohms
- 212 to 572 Degrees Fahrenheit
- Temp Atomizer Resistance: 0.05 ohm - 0.3 ohm
- 0.96" OLED Screen
- Output voltage: 1.0V - 7.5V
- Input current: 1.3A - 40A
- Input voltage: 6.2V - 8.5V
- Reverse polarity protection
- Battery low voltage protection
- Low resistance protection
- Temperature overheat protection
- Output short circuit protection
What's in the Box:
- One iPV3 Li V2 Box Mod
- One User Manual
- One USB cable for updates
- One Warranty Card
WHERE: >> HERE <<
USE COUPON CODE JOE10 TO BRING THE TOTAL TO $98.99
SHIPS FREE FROM THE USA
Didn't think it was going to be that cheap did ya?
So you want a DNA200? Well get on the list. I'm sure its not going to be the bomb the DNA40 was. It's going to be a HOT seller. I'm sure they are preparing for the demand.
Rather then get into all the technical details about this chip - ill just point you to where you can preorder it for just $79.00 + free shipping. All the technical details are there.
Oh shit, now that its on my blog - it might get cloned <snicker>
WHERE: >> HERE <<
USE COUPON CODE HELLO2015 AND IT GETS YOU FREE SHIPPING
Seller extended the sale!
SWEET DEAL PEOPLE!
The latest box mod from industry
leaders Sigelei produces huge, regulated power for less dollars. The
Sigelei is the box mod for you if you want to blow fat clouds, but it's
also for anyone looking for an ultra-reliable, stoutly-built mod with
lots of features and adaptability. Sigelei packaged the 150w with the
high end SX330 chip, and with 2 30amp 18650 batteries installed this box
mod will put out a monstrous 150 watts on builds as low as .1 ohms and
as high as 3.0 ohms. Great power requires great regulation, and the
Sigelei has it in spades: A temperature sensor keeps your rig from
overheating, and voltage, short circuit and battery protection is all
included.
The Sigeli 150's chassis features
all aluminum construction and ships with a removable silicone sleeve for
a sure grip. The battery cover is magnetic, so switching out the 18650
batteries is a no-hardware cinch. At lower wattages (as low as 10w)
the 150w will vape for days on fully charged batteries, and when it's
time to recharge the advanced chip saves your voltage and wattage
presets with the batteries removed. A spring loaded 510 copper pin
works with virtually all atomizers and the high visibility display keeps
you informed on all settings and levels.
FEATURES:
- Visual Operating System
- Variable Wattage
- Low Voltage Protection
- Low Resistance Protection
- High Voltage Warning
- Short Circuit Protection
- Reverse Polarity Protection
- High Temperature Warning
- Use Replaceable Battery
ONLY BLACK LEFT IN STOCK
WHERE: >> HERE <<
USE COUPON CODE 150WATTDEAL TO BRING THE TOTAL TO $65.99
SHIPS FROM THE USA
I love this mod.. I own three of them!
The IPV4 is an incredible box mod by Pioneer4You. The IPV4 features an upgraded YIHI SX330v4S chip with 100W capabilities and temperature control! This box mod takes two 18650 batteries, giving you all the power you need, and an all new door held in place by ball bearings to make switching batteries easier than ever. The IPV4 will fire down to 0.1 ohms and will automatically calculate voltage as you adjust the wattage. Batteries for this device must be purchased separately.
Features:
Output Power: 7 - 100 Watts
Output Temp: 5 - 50 Joules
Output Voltage: 1.0 - 7.0 Volts
Output Current: 35A
Standard Resistance: 0.1 - 3.0 Ohms
Temp Limit: 200 - 580 Fahrenheit
Input Voltage: (Dual Batteries) 6.2 - 8.5 Volts
Input Current: 1.3 - 25 Amps
DC-DC Power Output
USB Update
Slide On Battery Door
0.96" OLED Display
This Device Includes:
1 x IVP4 100W Box Mod
1 x charging / data cable
WHERE: >> HERE <<
USE COUPON CODE VAPORJOES TO BRING THE TOTAL TO $67.49
The REMentry RDA is the newest rebuildable atomizer by REM Creations, the makers of the REMatty.
The REMentry RDA is constructed of a combination of stainless steel and
delrin. The deck features a three post design with each post featuring a
squared design. The negative posts are milled to the deck and the
positive post is reinforced with a squared PEEK insulator. The juice
well is a whopping 5mm deep. The deck sits fitted into a colored delrin
sink to help keep the atomizer cool. The barrel is a long 20mm barrel
with two 5mm by 2mm airflow slots. The REMentry RDA also features a
matching delrin 11mm wide bore competition cap with airflow control tabs
to adjust airflow control. The REMentry RDA rebuildable atomizer by REM
Creations, affordable quality.
Product Features:
- Three post design with squared shaped posts
- 22mm in diameter
- Matching competition cap with airflow tabs
- PEEK insulators
- Copper 510 pin
- Four beautiful and vibrant finishes
WHERE: >> HERE <<
USE COUPON CODE JOE10 TO BRING THE TOTAL TO $31.49
ALL ORDERS GET A FREE 10ML OF MILLENNIUM JUICE
