30 GAUGE KANTHAL WIRE - 100 FEET - $3.74 - FREE SHIPPING

...its eBay

One of the lowest prices I have seen to date!

THE HARD COPY:

Genuine USA Made Kanthal A-1 Resistance Wire
Kanthal A-1 is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) with high resistivity and very good oxidation resistance. It is suitable for use at temperatures up to 1400°C (2550°F). Typical applications for Kanthal A-1 are electrical heating elements in high-temperature furnaces for heat treatment, ceramics, glass, steel, and electronics industries. The best atomizer wire available! 100 ft per spool.


Kanthal Wire Data:

Shape: Round
Heat treatment:  Annealed (soft)
Max. operating temp: 1400°C (2550°F)
Gauge: 30
Ohms: 8.36 per foot at room temperature.
Diameter:  0.01in /0.254mm




WHERE: http://www.eBay.com

$3.49 + FREE SHIPPING

LOW: KANGER MINI PROTANK 2 - $12.61

....its 101vape

Kanger Protank 2 Mini

Here is a great deal on the Kanger Protank II - MINI.   I loved the original and I love the new version.   The heads are all interchangeable so you don't need to buy separate heads.


THE HARD COPY:

The Mini Kanger Protank 2 is a glue-free and fully disassemble-able Ego Clearomizer! 

The Kanger Protank 2 offers the same great features and performance as the Kanger Clearomizers but with the introduction of a glass tank! The mouthpiece is permanently attached.

• Pyrex tank is replaceable
• Glue Free: All parts are replaceable

Features:

• Replaceable Atomizer Heads (interchangeable with Protank 1 and EVOD)
• Bottom Coil
• Pyrex Glass Tank
• Advertised with a 1.5ml capacity
• Dimensions: 3"L x 9/16"D

WHERE: http://101vape.com/

THE DEAL:
USE COUPON CODE vaporjoes13 TO BRING THE TOTAL TO $12.61

HURRY: INNOKIN ITASTE VTR - $99.00 - FREE SHIPPING - IN STOCK!

....its Vaporkings

VTR NEXT TO THE ITASTE 134

FINALLY! Under $100.00 AND IN STOCK!

BOUGHT 2 - LIVE ON DONE DEAL

The cheapest price your currently going to find on an instock VTR!

iTaste VTR is a solid variable wattage and voltage vaping device with detailed finish. It features a rotational wheel and a protective skeleton to hold the tank inside. The voltage and wattage can be adjusted with the rotational wheel; the screen displays voltage or wattage and offers intuitive control over settings leading to more accurate performance.

Features in Brief:

Variable Voltage: 3.0 to 6.0 volts in .1 volt increments
Variable Wattage: 3.0 to 15.0 W in .5 watt increments
Short Circuit Protection
RMS (root mean square) voltage algorithm
Reverse Battery Protection Circuit
Resistive Load Detection (Ohms meter)
ON/OFF battery switch
LED Battery Power Display
Low Voltage Warning
Overtime Vaping Warning (10 second switch cutoff)
Battery safety protection (Vent holes)
High compatibility 510/eGo connector (on extension piece, VTR base is 510 only)
Built-in 3 digit display (Ohms meter, Volts /Watts, Atomizer voltage output)
Replaceable Battery: iTaste VTR supports 18650 batteries no longer than 65mm long (unprotected)

Your Innokin iTaste VTR kit will come with:

(1) iTaste VTR mod
(1) Extension tube for using larger than 19mm wide tanks
(1) iClear30S polycarbonate dual coil clearomizer tank and one atomizer coil
(1) Instruction manual
(1) Hardsize carrying case


WHERE: http://www.vaporkings.com

$99.00

BAGUA MECHANICAL WITH BLACK ACCENTS - $21.35

....its Fasttech

Bagua Mechanical

Here is a great deal on the telescopic Bauga mechanical with black accented rings.

The Bagua mechanicals tend to be 18350 only. This particular model has the added bonus of being telescopic - allowing the user to use more than 1 battery type.

The body is made of stainless steel with black aluminum accent rings.


THE HARD COPY:

• Engraved with 'Eight Diagrams' 
• Stainless steel body
• Telescopic 510 center pin
• Spring-loaded firing button
• Aluminum locking ring (is reverse threaded)
• Aluminum airflow control ring
• Recessed 510 threading connector
• Compatible with any device with 510 threaded connector
• Can be powered by 1*18350 battery/1*18500 battery/1*18650 battery

WHERE: http://www.fasttech.com

$21.35

BONUS: FREE WORLD WIDE SHIPPING

DISPLAY: MONSTER JUICE RACK - $49.95 FREE SHIPPING

.....its eBay and Amazon

If you have a huge juice collection or plan to have one - display it with pride!  

Keeping your supplies and your work space organized is very important, and the less space your supplies take up the better! This clever acrylic wall display will hold 114 standard  Bottles. Each shelf is 3 3/4" Height by 1 1/2" Deep by 20.5" in Length. Because the Display attaches to a wall and is only 1 1/2" wide, it takes up very little space and keeps your bottles stored upright and available for easy access and selection.

Dimensions 24 x 20.5 6 Tier Shelves 3 3/4" Between Shelves fits aprox. 114  bottles

Features: Clear acrylic Top shelf is open Drilled with 4 holes Turn Your Supplies into an organized show piece!

WHERE:

ON EBAY: http://www.eBay.com

ON AMAZON: http://www.amazon.com


$49.95 FREE SHIPPING

DROP: THE RAVEN CARTOMIZER TANK - $10.99 - FREE SHIPPING

....its Vaporbeast

Here is a great deal on the raven cartomizer tank.   These are much like the X2 tanks from Fasttech but use cartomizers rather then pro tank heads.    I bought a some of these a few months ago for twice the price - so this makes this a GREAT deal.


THE HARD COPY:

• 510 connection
• Easy to fill and clean
• Unique atomizer/clearomizer desisgn
• Durable plastic tank
• Chrome body
• No burning or leaking
• Low resistance -1.8ohm-2.4ohm

Enjoy this medieval warrior! The appearance of this RAVEN is unlike anything on the market. In addition, the atty/carto is a hybrid of sorts.  It feeds like a traditional carto tank (slot on the side) but the inside reveals a "wick" type system similar to a clearomizer. You can also use F-16 or SMOK pre-punched cartos...so it's a very versatile tank.


WHERE:  http://www.vaporbeast.com

$10.99 + FREE SHIPPING

DROP: INNOKIN ITASTE MVP VERSION 2 KIT - $52.15

...its Madvapes

Innokin Itaste MVP 2.0

 
I bought one a few weeks ago and I love mine!  A nice improvement over the original MVP. The build quality, form factor, and battery life is just some of the great features.  In my opinion its one of the best all around variable wattage mods going.

1. Variable Voltage / Wattage
2. Ohm reader/checker
3. Improved Button
4. Comes with Iclear30's rather then Iclear16's
 


Kit includes:

• iTaste MVP Variable Voltage / Wattage electronic cigarette
• iClear30 Clearomizer or iClear16
  
• USB Charger
• eGo connection cone

WHERE:

FULL KIT WITH iCLEAR30:   http://www.madvapes.com
FULL KIT WITH iCLEAR16:   http://www.madvapes.com

THE DEAL:
USE COUPON CODE oct10off TO BRING THE TOTAL DOWN TO $52.15

PORTABLE: KSD NOVICE RBA / 14500 MECHANICAL

...its Fasttech

KSD Mechanical RDA

Here is a very cool portable / small setup for the re-builder.  One of the issues many RBA users find is having to leave the house with a big mod set up.   Here is your answer. These use a single 14500 battery which really helps bring down the size and bulk of the mod. 

This price is for the complete set up shown.


THE HARD COPY:

• Full mechanical mod with dripping atomizer
• Stainless steel construction
• Brass 510 center pin
• Bottom lockable firing button
• 510 threading connector
• Can be powered by 1*14500 battery (batteries sold separately)

WHERE: http://www.fasttech.com

$21.75

BONUS: FREE WORLD WIDE SHIPPING

TIMELESSVAPOR - 2 x 30ml JUICE - $17.10

....its TimelessVapor

Its sale time again @ Timelessvapor.com. She has added many new flavors and I have been ordering them as they pop up.   The Jedi Juice, The Alien DNA, Blue Moon, and now Nanna Bacco.  One of the best tobacco vapes I have tried. Silky Smooth!


WHERE: http://www.timelessvapor.com/ 

 
THE DEAL:
Use coupon code vaporjoerocks that brings total down to $17.10 for 2 x 30ml.

THE RESULTS ARE IN: THE NEMESIS CLONE IS A HIT @ $29.08

... its Fasttech

The Nemesis Mechanical Mod

Shipping speed on my Nemesis clone from Fasttech

nem·e·sis

ˈneməsis

noun

noun: nemesis; plural noun: nemeses

1.

the inescapable agent of someone's or something's downfall.

Welcome to the beginning of the high end mechanicals fall from grace. As predicted a few months ago on Mod Envy - we will be seeing exact clones soon.  Here we have the Nemesis in all its evil clone empire glory..   

All the reviews I have seen and from personal experience these are top notch.


THE HARD COPY:

• Laser etched pattern
• No circuit board, full mechanical mod
• Stainless steel body
• 510 telescopic pin (silver-plated brass)
• Bottom lockable firing button
• SS air control ring
• Silver plated contacts
• Outer diameter: 22mm
• Recessed 510 threading connector
• Compatible with any device with 510 threaded connector
• Can be powered by 1*18350 battery/1*18500 battery/1*18650 battery 

  

WHERE: http://www.fasttech.com

$29.08

BONUS: FREE WORLD WIDE SHIPPING