BACK IN STOCK: INNOKIN ITASTE MVP2 - $39.99 (USA)

Innokin iTaste MVP2

The last run was huge and now they are back in stock with colors.

I OWN TWO. LOVE THEM!

The original MVP was a huge success and is still a very popular mod.  The new version is a variable wattage version with some nice upgrades.  For the price its a complete no brainier.

1. Variable Voltage / Wattage
2. Ohm reader/checker
3. Improved Button
4. Comes with Iclear30's rather then Iclear16's

IN THE BOX:

MVPv2

Iclear30

Charging cable

Beauty ring

clear jewel case

>> CLICK HERE TO GET THE DEAL << 

$39.99

BIG DROP: SMOKTECH CHROME BOLT MOD (METAL BUTTON) - $19.99

 

I have always been a fan of the chrome smoktech bolt.  Its a classic mod thats super tough and will last forever.   One of the original "clones" -- it was cloned after the Silver Bullet and has been staple in the vaping community for years.     This is also the only bolt that comes with a metal button. Now at an incredible price.  Great to add to any collection.  I own a few.

THE HARD COPY:

A new mod at MadVapes. This has a similar look and feel as a RoughStack except that it has a side mounted chrome horn switch. It is made of aircraft grade aluminum and polished to give it a great finished look. It is designed to hold an 18500 3.7 volt button top battery. This will work excellent with 1.5 ohm dual coil cartomizer or a 2.0 ohm or 2.5 ohm single coil cartomizer. The bolt will work great with the Dual Coil 510 Tank Cartomizer because of the side mounted horn switch and the slightly raised 510 connector on top. 

>> CLICK HERE TO GET THE DEAL <<

$19.99

THE $16.00 MATTE STAINLESS KAYFUN LITE REPLICA

 

Here is a great deal on a  matte stainless steel Kayfun lite replica.   I love the look of the matte finish.  These are very reasonable at $16.00 ea with free shipping.  For the price I picked up two.   If you love your Kayfuns - you might want to consider this one to add to your collection.

THE HARD COPY:

• Standard 510 drip tip
• Polycarbonate(PC) tank section
• 510 threaded connector
• Bottom screw fill-hole
• Height without drip tip: 56.8mm

>> CLICK HERE TO GET THE DEAL <<

$16.59

LOWER: A MUST FOR REBUILDERS - CERAMIC TWEEZERS - $11.11

NOW AT A NEW LOWER PRICE.

The photo above is what inspired me to start looking into these.  You see what they are doing?  Making a micro coil right deck of the rebuildable - by firing the PV.  Since the tweezers are heat resistant (ceramic) it gives the user a whole new way to rebuild with ease.

These are very expensive.  Everywhere I looked they were $30-60.00 ea. 
Now they are ultra affordable!

If you rebuild - buy these.


>> CLICK HERE TO GET THE DEAL <<

$11.11

TWO PACK: EFEST 30AMP 2100mAH 18650 BATTERIES - $20.69 FREE SHIPPING

Another great battery deal.

Here we have two 30amp 18650's from Efest.  These have a healthy 2100mAh capacity and are perfect for regulated and unregulated mods.   Sub-ohm vapers can enjoy the 30amp limit for those super low ohm builds. These ship from a USA vendor.


THE HARD COPY:

POW-POW-POWER!! These high drain batteries are powerful and perfect for advanced vaping. Sub-ohm like there’s no tomorrow when you vape with one of these bad boys in your mod.

• 1 x 2 pack of rechargeable batteries
• Flat top
• 18650 size, 2100 mAh capacity, 30 A
• Li-Mn high drain battery

BEASTLY BECAUSE: These are huge capacity (2,100 mAh ) batteries that rate very favorably. Great value for the price!


>> CLICK HERE TO GET THE DEAL <<

15% OFF COUPON EXPIRED - HERE IS A 10% OFF
USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $20.69 + FREE SHIPPING

BLOWOUT: THE FIRST DNA30 CLONE BOX MOD - $59.99

HERE IT IS!!

The DNA30 Clone everyone has been waiting for and at a KILLER PRICE!  
These will not last long so get in NOW!  Spread the word!

They are naming this the Lirpa Loof Mod.


DNA30 Specs:                          Minimum               Typical                        Max
Output Power                            7 Watts                                                   30 Watts
Output Voltage                          4 Volts                                                     8.3 Volts
Output Current                                                                                         10 Amps
Atomizer Resistance                  .3 Ohms                 1.5 Ohms                3.3 Ohms
Input Voltage                             3.2 Volts                  3.7 Volts                  4.3 Volts
Input Current                             1.5 Amps                 6.0 Amps                7 Amps
Efficiency                                                                   94%
 
DIMENSIONS:
LENGTH: 1.87″
WIDTH: 1.2″
HEIGHT: 3.93″

>> CLICK HERE TO GET THE DEAL <<

$59.99

THE GOLD STANDARD: MNKE 26650 BATTERIES - $8.99

The gold standard of the high amp 26650 batteries is the MNKE 26650.   These have been a tried and true battery for years.   Now being offered at a great price from a reputable vendor.

THE HARD COPY:

MNKE batteries are the definitive battery for the mechanical-mod user.  Not only are these the safest batteries available, they also perform better for a longer period of time.  The high amp-limit on these batteries means you can build sub-ohm coils without fear of the batteries venting.  These are 3500mAh batteries, and can hold a charge above 3.7-volts for much longer than other IMR batteries, which means hours of use before a noticeable difference in voltage compels a battery change. These batteries will perform just as well in an APV or Variable Voltage/Variable Wattage mod, although the advantages won't be as apparent. If you like to build your own sub-ohm coils on a mechanical mod, you won't believe the performance and battery life these cells offer.

Specifications:

Brand Name: MNKE
Size: 26650
Type: Li-Mn (High Drain)
Rated Capacity: 3500mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Rechargeable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Orange
Maximum Continuous Discharging Current: 20 A
Maximum Pulse Discharging Current: 60 A
Maximum Continuous Charging Current: 6.5 A

>> CLICK HERE TO GET THE DEAL <<

$8.99

SWIM AND VAPE: THE E-LVT MOD $59.45

With summer coming - you may need to swim and vape!

This mod is by KYX and its called the E-LVT.    Its a Waterproof / Pressure resistant variable voltage / wattage mod.   Small LED light on the bottom of the mod. These run on a single 18650 battery.   You can also use this to recharge other devices via a USB cable.  Considering what the cost to vendors are, this is a really really great price.


THE HARD COPY:

• Quick click the power button for 3 times to turn ON/OFF
• Variable wattage - can be adjustable from 3.0W to 15.0W (in 0.5W increments)
• Variable voltage - can be adjustable from 3.0V to 6.0V (in 0.1V increments)
• Check battery level, voltage, resistance and wattage
• Low battery, low resistance and short-circuit warning
• Voltage indicator: Lower 3.6V (red), 3.6-3.75V (yellow), Over 3.75V (green)
• Locking function for "+" &"-" buttons
• The maximum time for inhale once is 10 seconds
• Power supply: you can recharge the mod with attached USB cable, or you can take out the 18650 battery to charge
• Charging indicator: The LED indicator is ON when charging, and turns off automatically after fully charged
• 510/eGo threaded connector
• Brass contact
• Powered by single 18650 battery (battery sold separately)
• Can be used as a mobile power bank
• With LED flashlight
• Water-resistant, shock-resistant and dust-proof

>> CLICK HERE TO GET THE DEAL <<

$59.45

BLOWOUT: INNOKIN ITASTE MVP2 KIT + FREE SHIPPING - $35.77 (USA VENDOR)

UPDATED: NEW LOWER PRICE

Innokin iTaste MVP2

BLOWOUT PRICE + FREE SHIPPING FROM THE USA!

The original MVP was a huge success and is still a very popular mod.  The new version is a variable wattage version with some nice upgrades.  For the price its a complete no brainier.

1. Variable Voltage / Wattage
2. Ohm reader/checker
3. Improved Button
4. Comes with Iclear30's rather then Iclear16's

IN THE BOX:

MVPv2

Iclear30

Charging cable

Beauty ring

clear jewel case

>> CLICK HERE TO GET THE DEAL <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $35.77

LOW: TRIDENT V2 DRIPPER - $14.99 (USA)

Here is a great deal on the v2 Trident RDA.   Lots of improvements over the original.  

The terminals feature a vertical slit instead of the typical holes for easier installation of coils. The top cap is also the airflow control allowing for 1.5mm, 2mm and 2.5mm air holes. While keeping the tri-posts intact, the V2 makes use of a spinning ring in order to adjust the air flow.

Improvements over the original:

• Easy Adjust for air holes
• Easier Top Cap Removal
• Better Insulators
• Stainless Steel
• Food Grade
• Copper Positive
• 2 Adjustable Airflow Hole
• Twist-On Airflow Control 

>> CLICK HERE TO GET THE DEAL <<

$14.99