LABOR DAY: FOR THE LAZY - 50 PACK PRE-BUILT SUB-OHM COILS - $3.60

So if you lazy like me - you hate building coils.

Today you can get 50 coils built at .35 for jut $3.60.   These come with cotton wicks.  What type of cotton is unknown so I'd advise against using the wicking material.  The cotton is a good way to separate your coils if you have them all mashed together, but before you vape - replace this wicking material with something you more familiar with.


WHERE: >> HERE <<

$3.60 for 50

LABOR DAY: MTBAKERVAPOR - 13.9% OFF ALREADY LOW PRICES

 
Mtbakervapor is doing a nice discount coupon!

To celebrate labor day - they are doing 13.9% off.   With their juice prices already being one of the lowest in the industry - the discount makes them insane! Stock up now and save!  Buy your month(s) supply today and save big!  Some of my favorites are the Solar Flare, Lightning, Ecto Cooler, Hazelnut, Straight Tobacco, and Moo Juice.  Also be sure to check out their GWAR line of juice!

This is a site wide coupon so it works on hardware too. 

WHERE: >> HERE <<

USE COUPON CODE laborday14 TO TAKE 13.9% OFF YOUR TOTAL ORDER 

BACK UP COUPON:
USE COUPON CODE VAPORJOE TO TAKE 10% OFF YOUR TOTAL ORDER
 

LABOR DAY: IVOGO KAYFUN MINI + SLIM NEMESIS KIT - $33.70

Looking for something slim, sleek, stylish and that can deliver a great vape? Meet the IVOGO Baby Kit. It's a mini Nemesis style mechanical mod with tubes to house either a 14500 or 14650 battery, paired with a Kayfun Mini 2.1 ES Styled atomizer, and boxed as a set.


THE HARD COPY:

Atomizer features:

• Stainless steel construction
• Removable 510 drip tip
• Adjustable air flow
• 510 threading connector
• Height without drip tip: 65mm

Mod features:

• It is a Nemi Nemesis style mechanical mod
• 510 threading connection
• Chromed brass contacts
• The contact on the top cap is adjustable to both directions so the atomizer will sit flush with the top cap and the battery will not rattle
• Sliding AFC ring on the top cap (4 air holes)
• Bottom spring loaded firing button, the locking ring is NOT reverse threaded
• 4 battery vent holes beneath the locking ring
• Laser engravings
• 14.4mm inner diameter
• 17mm outer diameter

WHERE: >> HERE <<

$33.70

LABOR DAY: HOPE LIQUIDS - BUY 2 GET 1 FREE + 40% OFF ALL LIQUIDS

Its a big sale at hope-liquids!

Hope-Liquids is running a buy 2 get 1 free AND 40% OFF!

Now would be a great time to stock up on your favorites or give them a try!   It doesn't get cheaper then this.     Some of my personal favorites is "Heard it through the Grape Vine" and "Coconut Cream Pie".






WHERE:  >> HERE <<

THE DEAL:
USE COUPON CODE COTTON4DAYS FOR 40% OFF

NEW BATTERY: THE PV IMR 18650 30AMP BATTERY - $6.64

PVTSO High-Amp batteries are the definitive battery for the mechanical-mod user. Not only are these the safest batteries available, they also perform better for a longer period of time. The high amp-limit on these batteries means you can build sub-ohm coils without fear of the batteries venting. Although these are 1600mAh batteries, they can hold a charge above 3.7-volts for much longer than other IMR batteries, which means hours of use before a noticeable difference in voltage compels a battery change. These batteries will perform just as well in an APV or Variable Voltage/Variable Wattage mod, although the advantages won't be as apparent. If you like to build your own sub-ohm coils on a mechanical mod, you won't believe the performance and battery life these cells offer.

THE HARD COPY:

Maximum Continuous Discharging Current: 30 A
Maximum Pulse Discharging Current: 45 A
Maximum Continuous Charging Current: 3A
Brand Name: PVTSO
Size: 18650
Type: Li-Mn (High Drain)
Rated Capacity: 1600mAh
Nominal Voltage: 3.7V
Peak Voltage: 4.2V
Cut-off Voltage: 2.5V
Dimensions: 18.3mmX65mm
Rechargeable: Yes
Protected: No
Chemistry: Lithium manganese Dioxide (Li-Mn02)
Style: Flat Top
Color: Yellow
Rated Capacity: 1600mAh


WHERE: >> HERE <<
 
USE COUPON CODE ECF5OFF TO BRING THE TOTAL TO $6.64 

 

KAYFUN KILLA: THE ORCHID STYLE GRAVITY FED TANK - $14.36

Here's a great deal on the Orchid styled gravity-fed rebuildable atomizer. With similar function to the kayfun styles, the Orchid features an ideal setup for dual coils, with four channels to feed juice to your thirsty build. More juice, more vapor, more flavor! Attractive styling and a durable PMMA tank make it a great looking atty for your setup.


THE HARD COPY:

• Compatible with 510 drip tip (drip tip sold separately)
• Quad-pole for dual coil build
• 4 wick channels
• 2 air holes
• 510 connection (brass contact)
• Laser engravings on the chimney

WHERE: >> HERE <<

$14.36

24 HOURS: 38,000,000 HITS

Vaporjoes ticks off another million hits on the counter.  This means we are getting a day off.  Deals will continue tomorrow at noon.  Deals will continue to be posted in our FACEBOOK group in real time by other vendors and vapers.  Thank you to all :)

Join our email list for daily deals and steals

FROM THE USA: THE CLOUPER 150 WATT BOX MOD $110.19

The new 150 watt box mod by Clouper is now up for sale.   China is pushing the limits on wattage and is coming out swinging with this new mod.   This mod uses two 18650 batteries.  The form of this box mod reminds me a lot of the IPV2/3.

The price is killer! You wont see it this low for very long.


WHERE: >> HERE <<

USE COUPON CODE 5OFF TO BRING THE TOTAL TO $110.19
 

THE 454 BIG BLOCK RDA - $11.49 / $15.99

A rebuilders dream!

Single, Dual, or Quad coil setup

In Copper or Stainless steel

Unique design with no negative posts, the entire outside of the atty is the negative 'post'. Wires are secured by a removable stainless steel ring. Delrin insulated drip tip with stainless steel accent and unique side venting to prevent spit back and create a vortex inside of the cap. Adjustable air control and direction flow outer cap. By lining up the different configurations, it can produce 1,2 or 4 adjustable sized vent holes depending on your build. 

 

THE HARD COPY:

• Removable top cap for easy access to wicks
• Air fin cooled top cap to reduce heat
• Adjustable air control and direction flow outer cap. By lining up different hole configurations, it can produce 1, 2, or 4 adjustable sized vent holes depending on your build
• Entire outside of atty is negative post. Wires are secure by removable stainless steel ring
• Deep juice well (approx. 4.1mm)
• PE 510 drip tip with stainless steel accent
• Unique side vented drip tip to prevent spit back from coils and create vortex inside of cap
• Conical internal top to enhance flavor
• Stainless steel center post
• Copper 510 center pin
• 22mm diameter
• Height without drip tip: 31.2mm

 

 

CHINA ($11.49):  >> HERE <<

USA ($15.99 SS ONLY): >> HERE <<

MORE POWA: CHINAS 180 WATT / TRI 18650 BOX MOD

Seems China is pushing the limits on wattage everyday.  We just announced a 150 watt box mod coming from Clouper, and now this.   This box mod will hit a maximum of 180 watts and uses three 18650 batteries.   Its unknown what chip-set they are using - but when its released you know people will be putting to the test to make sure its accurate. 

In terms of looks - I think its smart.

CHECK IT OUT:  >> HERE <<

DOMINATE: PERSEUS 26650 GENNY TANK - $22.64

Been waiting for a hot genny-style atomizer to fit your 26650 mods? Here it is. It's the Perseus styled rebuildable tank atomizer, and it will look dynamite atop any setup. A glass 3 ml tank feeds a two wick setup with smaller fill hole in the deck. The positive post has its drilled post connection near the deck and the two drilled negative posts, have their holes drilled higher. The tank is protected by a steel sleeve with cutouts and the three part cap features an adjustable airflow, and the matched drip tip is included. Constructed of stainless steel with a sand=blasted finish and polished accents.

Comes with two pre-coiled silica wicks, two stainless steel rope wicks, spare o-rings, and a building guide (referred to as the "blanking pin" allowing you to create perfectly sized and shaped coils without the need to raid your drill bit collection.



THE HARD COPY:

• Stainless steel 510 drip tip
• Sliding air flow adjustable, 2 air holes or 4 air holes option
• Top refill
• Triple posts design, stainless steel posts with Phillips head screws
• Two wick holes
• 3.0ml juice capacity
• Glass tank with stainless steel sleeve
• 510 threading connection
• 29.5mm external diameter
• Height without drip tip: 48.5mm
• Laser engravings

 

WHERE: >> HERE <<
 

$22.64

 

 

PROJECT SUBOHM: COMPETITION RDA BY CONGREVAPE - $26.99

Two USA Companies; One Common Goal: To Bring Innovation, Originality, Affordability, and Functionality to the vaping community! Project Sub-Ohm™ X Congrevape Are Proud to Bring You A True Ultra Affordable Cloud Chasing Machine: The Competition Doge RDA Project Sub-Ohm™ Edition! This RDA is designed from ground up to have sufficient juice delivery, high conductivity, and outrageously large airflow system. The huge cloud produced from this RDA is something you need to experience to understand! Are you ready for the ultimate cloud chasing experience?

Competition Doge by Project Sub-Ohm™ X Congrevape

Designed from ground up, the Competition Doge RDA is an all US Designed RDA, features massive dual cyclops airflow channels, you will never be hurting for more airflow again!

Product Features:

• Adjustable Airflow holes are 11mm wide, that is the biggest airflow we have seen on an RDA!
• The Deck has no airflow restrictions
• Negative Posts are milled to the base so you are getting the maximum conductivity and durability
• 8 Cooling Fins: We believe 8 Fins are the perfect layers to cool down even some of the hottest vape
• Interchangeable components with many other popular 22mm Atomizers
• Huge Post Holes to fit some of the thickest wires
• Conical Designed Top Cap to create that perfect flavor
• Beautifully Engraved with Project Sub-Ohm™ Logo and "WOW" on the bottom of the RDA
• Copper bottom center pin only for maximum conductivity
• Thick screws for ease of build
• Deep Juice Well
• 3 Piece Design
• Serialized for that personal touch
• Matches All Other Project Sub-Ohm Products
• Original & Affordable
• Designed In USA
• Presented to you by Project Sub-Ohm™ X Congrevape

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99
 

IN FORCE - THE VAPORJOES NETWORK HITS VAPEMANIA!

This weekend is an event I have been waiting for. The boys from the TVA show (Freeze and Mooch) are putting on a HUGE event.   I had a chance to take a look around before the event started and the place is MASSIVE.  Over 42,000 square feet of vendors and tables.  It's so large that Madvapes drove in a huge Food truck style booth. In terms of size - one of the of the biggest events I have ever attended. 

Grimm Green is here and is set to take on a formidable opponent in an arm wrestling match to the death! 

Nuclear Vandalism will be broadcasting the meet live as well as Plumes of Hazard.   Should be lots of fun.


If your not here... get here:


Benton Convention Center

August 29 and 30th, 2014 
301 W 5th St
Winston-Salem, NC 27101
thetvashow@gmail.com
Tel: 336-399-7724

WHERE: >> HERE << 

IN COLOR: THE TUGBOAT GETS A PAINT JOB - $8.98

The tugboat is a solid, tried, and true rebuildable atomizer.  Now in super sexy new colors!
  
I have been a huge fan of the Tugboat RDA.  I'm also a huge fan of cheap prices.   This is a match made in heaven.   The Tugboat is a fantastic dual coil dripper that is built solid.  Out of all the three post drippers I own the Tugboat is my favorite.  Matching engraved and insulated drip tip included.  


THE HARD COPY:

• 510 drip tip (with heat insulator)
• 2 air holes
• Deep juice well (approximately 4.5mm deep)
• Tri-post design
• Stainless steel posts
• Copper 510 center pin
• 22mm external diameter
• Height without drip tip: 31mm
• Laser engravings

WHERE: >> HERE <<

USA DEAL: FOGGER VERSION 4.1 - BLACK OR SILVER - $28 + FREE SHIPPING

The Fogger version 4.1 is now being offered at a fantastic price!

These have improved airflow control and copper center pins for better conductivity.

Fantastic price!

FEATURES:

• 22mm diameter
• Dual coil setting configuration
• Bottom feeding mechanism
• 4ml volume capacity
• Threading top cap , easy to assemble/disassemble
• Air flow control ring
• Etched logo on top cap and laser printed on the chimney
• Adjustable bottom pin
• 510 thread
• Bottom juice filling

WHERE:  >> HERE <<

$28.00 + FREE SHIPPING
SHIPS FROM THE USA!

FINAL DAYS: LOW PRICE NIC BASE - $50.00

LOWEST PRICE ON 100MG NIC EVER!!

We are in the FINAL days of this sale!  It goes until Aug 31st.

Today this vendor is having a an epic sale on 100mg nic base.  
I have used them in the past - its very very clean! 

For someone like me I can turn this into 16 LITERS  ( 540 30ml bottles ) of juice at my nic level.  
Impressive for a very small investment.

This is a great opportunity to ensure you have a supply for any issues that may arise.


Great for mom and pop juice companies too!

This is 100% flavorless nicotine base.  
All you need to do is cut it to your desired mg level, add flavoring to taste.

I keep my nic in the freezer to extend its shelf life.


THE HARD COPY:

Our famous Unflavored Nicotine "Smoke Juice" E-Liquid is made with the highest grade nicotine available.  Buy with confidence knowing that you are getting the very best nicotine available and that it is always distilled from actual tobacco leaves not synthetically produced.  For more information read below and click the link to see our latest batch testing results.


WHERE: >> HERE <<

KATO MECHANICAL BOX MOD - $47.49

Been on the fence about the Kato Square Box styled mechanical mod? Then it's time to jump off, and grab one! This is the lowest we've seen them so far, and by a long shot. 

It's a very attractive mechanical 18650 box mod with a top firing button that locks. Body is brushed aluminum, frame and accents are stainless steel. The ring houses an atomizer down inside the profile of the mod, so it's a compact, clever setup.... and yes, to give you an idea of size, a Kayfun style fits nicely.

THE HARD COPY:

• Polished stainless steel top frame + bottom frame
• Brushed aluminum body
• Brass contacts
• Spring-loaded firing button, the locking ring is NOT reverse-threaded
• 510 connection
• The ring on top frame is 23.4mm in inner diameter
• Houses single 18650 battery (battery sold separately)
• With logo engravings

WHERE: >> HERE <<

$47.49
 

BREAKING: CLOUPER TO RELEASE A 150 WATT BOX MOD

Vendor cost: $79.99 for less than 20 units 

 Should be ready in 30 days.

;)