QUAD COIL: THE SMOKTECH TFV4 SUBOHM TANK - $29.99 + FS

This is the new quad coil monster from Smoktech.  Works much like a normal subtank but takes triple and quad coil heads for a monster like vape experience!


TFV4 Features:

100% Stainless Steel Design
Patented Quad Coil and Tri Coil
Wattage Range: 40W-140W
Quad Coil Resistance: 0.15Ω
Tri Coil Resistance: 0.2Ω
Hinged, Top Fill Design
Dual-Layered Drip Tip Design
Dual and Single Coil RBA Head Options
5mL Capacity


Full Kit includes:

1 TFV4 Tank
1 0.2 OHM triple coil
1 0.15 OHM Quad coil
1 RBA Head
1 Spare Pyrex glass tank
2 Silicone bands
1 Pad of organic Cotton
1 Mini Screw driver
1 Spare silicone insert
1 User manual
100% Authentic with scratch authentication code


WHERE: >> HERE <<

USE COUPON CODE tfv4deal TO BRING THE TOTAL TO $29.99
THIS PRODUCT SHIPS FROM THE USA 

AUTHENTIC DOVPO GUARDIAN 150 WATT BOX MOD (V 1.5) - $61.74

Dovpo Guardian 1.5 box mod offers 150 watts of power and temperature control.. The case is made from zinc alloy with a rubberized finish. The Guardian 1.5 mod can fire atomizers as low as 0.1 ohm and has an output of up to 38 amps.  It includes a large OLED screen (like the DNA40 or DNA200)  and has a new battery door that allows each cell to easily slide in or out from the bottom of the device.

THE HARD COPY:

0.91 inches OLED screen
Temp control range: 200℉-600℉
Operating Wattage: 3W - 150W
Nickel 200 atomizer working resistance range: 0.1Ω - 1.0Ω
Normal atomizer working resistance range: 0.1Ω - 3.0Ω
Maximum Output Current: 39A
Working Voltage: 6.4V - 8.4V
Requires two 18650 batteries


WHERE: >> HERE <<

USE COUPON CODE 5%downforyou TO BRING THE TOTAL TO $61.74

SLASHED: THE IPV3 LI - 165WATT BOX MOD - $74.99 + FREE SHIPPING

The iPV3 Li V2 by Pioneer4you is one of the most feature packed box mods in today's market, combining 165 Watts of adjustable power, temperature control functions, and a ball locking sliding door, all at an incredible price! Utilizing two 18650 batteries (not included) , the iPV3 Li V2 uses a YiHi SX330V3SL Chip, providing incredible accuracy and range, firing resistances from 0.1 to 3.0 ohms with adjustments from 10 to 99.9 Watts in increments of 0.1 Watts, and 100 to 165 Watts in increments of 1 Watt. With efficiency ratings of over 95%, the iPV3 Li is truly the current pinnacle of regulated box mods. Fully integrated temperature control is also present, with adjustments from 212 to 572 degrees Fahrenheit, firing temperature mode resistances down to 0.05 ohms. Manufactured out of Aluminum, the iPV3 Li V2 features a dovetail sliding door with a ball locking mechanism. A spring-loaded brass 510 connection makes adjustment and atomizer connection consistent and hassle free. Utilizing the Micro USB port, user's will also have the opportunity to upgrade the iPV3 Li V2 to 200 Watts once the firmware update becomes available.

 
Product Features and Specs:

• Billet Aluminum body
• YiHi SX330V3SL Chip
• Utilizes two high amp 18650 batteries (sold separately)
• Three button design
• Micro USB port for updates
• Dovetail Sliding and Ball Locking Door
• Brass 510 spring loaded connection
• Output wattage range of 10w-165w
• Atomizer Resistance: 0.10 ohm - 3.0 ohms
• 212 to 572 Degrees Fahrenheit
• Temp Atomizer Resistance: 0.05 ohm - 0.3 ohm
• 0.96" OLED Screen
• Output voltage: 1.0V - 7.5V
• Input current: 1.3A - 40A
• Input voltage: 6.2V - 8.5V
• Reverse polarity protection
• Battery low voltage protection
• Low resistance protection
• Temperature overheat protection
• Output short circuit protection

What's in the Box:

• One iPV3 Li V2 Box Mod
• One User Manual
• One USB cable for updates
• One Warranty Card

WHERE: >> HERE <<

USE COUPON CODE ipv3deal TO BRING THE TOTAL TO $72.00
SHIPS FREE FROM THE USA

 

CLONED: THE DEVIATE 60 WATT / TC BOX MOD - $52.24

The $249.00 mod from Madvapes has been cloned.  To be honest - I really believe they are coming from the same factory and those that paid $249.00 are just beat.  The clone actually pushes 20 watts more then the authentic which is just hilarious.

This mod is truly unique looking - straight out of the movie Alien.


THE HARD COPY:

Temperature control
Variable wattage: wattage can be adjusted from 1W to 60W
Lock/Unlock: Click the Fire button 5 times.
Increase Power: Press or hold the Up button.
Decrease Power: Press or hold the Down button.
Flip Screen Orientation: Lock the device. Then, hold the Up button and the Fire button simultaneously.
Stealth Mode/Normal Mode: Lock the device. Then, hold the Down button and the Fire button simultaneously. Stealth mode deactivates the screen when not needed to save battery life.


WHERE: >> HERE << 

USE COUPON CODE 5%downforyou TO BRING THE TOTAL TO $52.24

SUNDAY RECAP - THE MOD ENVY REPLAY - 8.8.2015 - NICKEL / VAPE MANIA

Here is the Mod Envy replay for 8.8.15

Vaporjoes kidnaps TygerTyger
TVA Show shows up to talk about Vape Mania 2015
Why Nickel may be hazardous

You can check out Mod Envy every Saturday @ 10pm EST 

http://www.vapingundergroundlive.com

ON YOUTUBE

ON SOUNDCLOUD




You can now download the podcast versions of Mod Envy and Done deal on the Vaporjoes App for Android. 

YOU CAN GET IT HERE >> HERE <<

IN STOCK: THE IPV D2 - 75 WATT / TC BOX MOD - $44.99 + FJ

THE HARD COPY:

The IPV D2 is PioneerYou’s newest temperature control mod. It is a sophisticated product evolved from the IPV Mini V2. It’s attributes include being smaller than the one before at as well as much lighter. With an output power at a range of 5W-75W and 5 Joules- 75 Joules. Voltage range s between 1V- 8V while current range is 1Amp- 25Amp. This product calls for one 18650 battery. The IPV D2 will be available in the color black initially but will eventually also be available in silver as well. Also, if you are looking to go the extra mile to customize your mod; silicone covers will be sold separately to fit this unique device. The silicone covers will be available in multiple colors including: Blue, Pink, Yellow, Red, White and Black.

THE HARD COPY:

• Output power Min. 7 watts, Max. 75 watts
• Output power Min. 5 Joules, Max. 50 Joules
• Output Voltage Min 1V, Max 8V
• Output Current Min. 1A, Max. 25A
• Standard Atomizer Resistant Min 0.20Ω, Max 3Ω
• Joules Mode Atomizer Resistant Min. 0.05Ω, Max. 0.3Ω
• Temp. Limit Fahrenheit Min. 200F, Max. 580F
• Temp. Limit Centegrade Min. 100C, Max. 300C
• Input Voltage Min. 3.2V, max. 4.5V, Typical 3.7V
• Input Current Min. 1.3A, Max 30A
• USB Charging for batteries? Yes


WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $44.99
ALL ORDERS GET A 10ML BOTTLE OF MILLENNIUM JUICE

NEXT: THE AUTHENTIC ELEAF ISTICK 100 WATT BOX MOD - $35.99 + FJ

WE SOLD OUT THE FIRST DEAL - SO HERE IS A SECOND DEAL

The new 100 watt is the first ever iStick with a dual-18650 design, and Eleaf has taken things a step further by wiring the cells in this full-size mod in parallel – an unusual, and awesome feature in a regulated mod.  Parallel wiring means simple and balanced usb charging is a reality on the iStick 100, as is incredible battery life under moderate-power vaping. 

Build quality is top notch here: the iStick 100w has removable batteries but feels like an integrated battery mod by virtue of its extremely well-fitted, magnetized battery door that is held fast by strong magnets and features jointing on top and bottom for an ultra-secure, rattle free lock.  The interface on the 100 has classic Eleaf ease-of-use, and a floating 510 pin and included ego adapter means that every tank and RDA just works, period.


THE HARD COPY:

Variable Wattage: 5.0W - 100W
Variable Voltage: 2.0V - 10V
Resistance Range: 0.15 to 5.0 ohm
Magnetic battery back cover
Added ventilation holes for better heat dissipation
Dual 18650 Batteries (Sold Separately)
Micro-USB charging port
OLED Display
Spring Loaded 510 Contact Pin
Stainless Steel 510 Threads
Stealth Mode Capability
Passthrough Functionality
Advanced Temperature Alarm Function
Low Voltage Protection
Temperature Protection
Atomizer Protection
Short Circuit Protection


WHERE: >> HERE <<

USE COUPON CODE VV3 TO BRING THE TOTAL TO $33.99
 

USA: THE JOYETECH EVIC VT 60 WATT / 5000MAH BOX MOD KIT - $59.00

 

Dying to get your hands on the newest addition to Joyetech’s eVic family? We can’t blame you! There’s a lot of value packed into this kit, and especially at this great price! The eVic VT 60W offers a range of 1 to 60 watts, boasts a 5000 mAh capacity, and has two modes of operation: VT (variable temperature) mode that can fire from 0.05 to 1.0 ohms, or regular mode that can handle 0.15 to 3.5 ohms. How low can you go!? Currently available with a US plug in orange or black, or with an EU plug in orange, black or white. 


The eVic VT features:

• Dimensions: 3-1/4"L x 1-7/8"W x 1"D (eVic-VT battery)
• Built in 5000mAh battery
• 510 threaded
• Output mode: VT-Ti/VT-Ni/VW Mode
• Temperature Range: 100-315 Celsius /200-600 Fahrenheit
• Operating Wattage: 1 to 60 Watts
• Output Voltage: 0.5V-8.0V
• Resistance Range: 0.05-1.0ohm for VT mode
• Resistance Range: 0.15-3.5ohm for VW mode
• Charged via USB
• 4ml Capacity

 

eGo ONE Mega VT-Ni (Nickel 200,made in USA)

• Diameter: 0.25mm
• Resistance: 0.2Ω
• Wicking Material: Organic Cotton
• Temperature recommended: 500-550˚F
• Peak wattage: 60W

eGo ONE Mega VT-Ti (Titanium)

• Diameter: 0.4mm
• Resistance: 0.4Ω
• Wicking Material: Organic Cotton
• Temperature recommended: 450-500˚F
• Peak wattage: 60W

WHERE: >> HERE <<

$59.00 - SHIPS FROM THE USA

USA: THE AUTHENTIC ELEAF ISTICK 100 WATT BOX MOD - $35.63

The new 100 watt is the first ever iStick with a dual-18650 design, and Eleaf has taken things a step further by wiring the cells in this full-size mod in parallel – an unusual, and awesome feature in a regulated mod.  Parallel wiring means simple and balanced usb charging is a reality on the iStick 100, as is incredible battery life under moderate-power vaping. 

Build quality is top notch here: the iStick 100w has removable batteries but feels like an integrated battery mod by virtue of its extremely well-fitted, magnetized battery door that is held fast by strong magnets and features jointing on top and bottom for an ultra-secure, rattle free lock.  The interface on the 100 has classic Eleaf ease-of-use, and a floating 510 pin and included ego adapter means that every tank and RDA just works, period.


THE HARD COPY:

Variable Wattage: 5.0W - 100W
Variable Voltage: 2.0V - 10V
Resistance Range: 0.15 to 5.0 ohm
Magnetic battery back cover
Added ventilation holes for better heat dissipation
Dual 18650 Batteries (Sold Separately)
Micro-USB charging port
OLED Display
Spring Loaded 510 Contact Pin
Stainless Steel 510 Threads
Stealth Mode Capability
Passthrough Functionality
Advanced Temperature Alarm Function
Low Voltage Protection
Temperature Protection
Atomizer Protection
Short Circuit Protection


WHERE: >> HERE <<

USE COUPON CODE vaporjoe13 TO BRING THE TOTAL TO $35.63

.50 A WATT: XPRO M80 PLUS - 4400mAH - 80 WATT / TEMP MOD - $40.00

With the M80 Plus by Smok, you are purchasing one of the best buys in the variable wattage category for both battery life and wattage range. Packing a 4400mAh internal battery, comprised of two lithium polymer cells, this mod will keep going and going. Combine that with its ability to be used as a pass through, and even the most hardcore vapers will have tons of battery life to leave the house with.

The M80 Plus is a variable wattage device with a range of 6-80W, adjustable in 0.1W increments. It still features the Mech Mode option from previous M-series devices, but has added Temperature Control to its features. Temp Control will allow the max temperature of the coil to be set between 200-900F when using nickel wire coils and coil heads.


Specs:

Variable wattage: 6 - 80W
Suitable for 0.2ohm - 4.0ohm atomizer
DC-DC flat signal, 510 spring loaded adjustable brass pin
Built-in 4400mah (2pcs 18650 li-polymer 20A) battery
Temperature control design allows you to regulate temperature between 100 and 600 degrees
Intelligent LED display screen shows battery capacity, wattage, voltage, resistance


In The Box:

• 1x M80 Plus Mod
• 1x USB Cable
• 1x User Manual
• 1x Replacement Rubber Button

WHERE: >> HERE <<

USE COUPON CODE xprom80 TO BRING THE TOTAL TO $40.00
THIS ITEM SHIPS FREE

THE MAGIC MIXTURE: YAELIQ 100ML FOR $11.00

The man from the holy land - Yaeliq.   One of the most kind and generous vendors I know. The man with the magic mixture! Vapers from around the world love his liquids!   I personally love the entire Milkshake line!

It's just $11.00 for 100ml's of juice.   That's about as low price as it gets!







 
You if haven't tried Yaeliq - now is the time.  
If you already love the juice - now is the time to stock up!   


WHERE: >>> HERE <<<

$11.00 for 100ml 
SHIPPING: FLAT RATE $10.00 ANYWHERE IN THE WORLD UNLIMITED BOTTLES

SPOTLIGHT: A CASE AGAINST VAPING NICKEL (Ni200) WIRE

UPDATE: OVER 70,000 HITS ON THIS POST IN 24 HOURS

I have never been a fan of vaping nickel.  Vapers will tell you that I think temp control is nothing but a fad.  As a new vaper many years ago I was told nickel is dangerous and never to vape on it.  For some reason, that changed.  Smokie901 showed me this video and I think it makes an excellent case against vaping nickel.  I am not trying to tell vapers what they should or should not vape but I think you should have all the information.   With the vapers rising up against juice companies not disclosing diacetyl - it amazes me nothing has been said about this.  So I think it's time we draw some attention to this.   Come to your own conclusions - personally I never vaped nickel and will never vape nickel.

BRING IT: SALE ON SMOK AND YOUDE (UD)

Here is a great sale on all Youde (UD) and Smok (Smoktech) products.  

All things RDA, RTA, and Mods!   Check it out and save big!  

Get what your looking for at super low prices!   All items ship free!

 

WHERE: >> HERE << 
ALL ITEMS SHIP FREE

 
 

ROLLOUT: PROJECT SUB-OHM SWIRLFISH RDA V2 - $26.99 + FJ!

The Project Sub-Ohm® SwirlFish™ V2 RDA is the newest iteration of the SwirlFish™ RDA, integrating a new Swirl Top Easy Drip System, a threaded, adjustable airflow deck shield, a new array of airflow options, an a shortened overall height as compared to the original. One of the marquee features of the SwirlFish™ V2 is the Swirl Top Easy Drip System, featuring a hinged locking top cap that is accessed using the finger notch or through a correctly fitted 510 drip tip, opening up for easier access for dripping. This easy to use feature allows for hassle free and accurate dripping particularly geared for everyday use. An embedded O-Ring provides additional friction to ensure consistent and smooth operation.

Airflow has been redesigned, featuring a paired triple diagonal slot and air-hole system, with each pair designed with corresponding sizes. Each diagonal slot measures 3mm long, with width increasing from 1mm to 2mm in a right to left fashion. Each paired air-hole also increases in size from just under 1mm to 1.5mm, creating a unique and turbulent airflow system specifically designed to increase swirl and airflow disruption. New to the SwirlFish™ V2 is the threaded deck shield, featuring a diagonally cut rounded square pattern, allowing for additional juice well space as well as complete airflow adjustment capability.

Building upon the original platform, the SwirlFish™ V2 features a split positive post system paired with deckmilled negative posts, with each posthole measuring 2mm in diameter. This ensures compatibility with a wide range of coil configurations and build types. A new squared PEEK insulator greatly increases heat resistivity and durability. Overall height has been shortened to 25mm, providing a more feature packed system in a more compact package. The SwirlFish™ is manufactured from 304 Stainless Steel to ensure durability, and features Silver Plated Copper Contacts for maximum conductivity. The signature Project Sub-Ohm® logo is engraved into the base of the deck, with the unique serialization run positioned below. Integrating new features to greatly enhance user experience while improving upon form factor, the Project Sub-Ohm® SwirlFish™ V2 RDA is positioned to be an innovative and feature packed RDA in today's market.


Product Features:

• 22mm Diameter
• Swirl Top Easy Drip System
  • Embedded O-Ring for Smooth and Consistent Opening and Closing
  • Finger Notch
• Triple Diagonal Slot and Airhole Paired System
  • Diagonal Slot Measures 3mm with Width Ranging from 1mm to 2mm
  • Paired Airhole Diameter Ranges from 1mm to 1.5mm
• Squared and Rounded Threaded Deck Shield
  • Independently Controls Airflow
  • Increases Juice Well Capacity
• 6mm Standard Setting Juice Well
• Split Positive Positive Post
  • 2mm Postholes
  • Squared PEEK Insulator
• Deckmilled Negatives
  • 2mm Postholes
• 304 Stainless Steel
• Silver Plated Copper Contact
• Iconic Project Sub-Ohm® Logo
• 100% Solely Designed, Engineered, and Developed in the USA by Project Sub-Ohm®!

Product Specifications:

• 22mm x 25mm

Product Includes:

• One Project Sub-Ohm® SwirlFish™ V2 RDA
• Three Sided Multi Tool
• Two Additional Pairs of O-Rings
• Four Additional Hex Screws

WHERE: >> HERE <<

USE COUPON CODE JOE10 TO BRING THE TOTAL TO $26.99
ALL ORDERS GET A FREE BOTTLE OF MILLENNIUM JUICE 

IN STOCK: IPV D2 BOX MOD + FREE BATTERY, SKIN AND HOLDER - $55.00

The IPV D2 Mod is the newest addition to Pioneer4You's impressive lineup of legendary IPV mods, like the IPV3Li, the IPV Mini 2, and the IPV4s. The D2 Mod by Pioneer4You is their latest take on an IPV Mini V2 mod but now with temperature control, more wattage and lower atomizer resistance! The IPV D2 is a single 18650 battery mod that features a quick access slide to remove battery cover. This little beast has an output of 75w in standard mode and 50j in temperature control mod. It can fire standard kanthal atomizers down to 0.2Ω and can fire temp control atomizers all the way down to 0.05Ω with a temperature range of 200°F - 580°F. With a large screen for it's size, the D2 makes it easy to know what setting you are vaping at. Charging batteries for the D2 is a breaze! Not only can you charge your battery while it is in the D2, but you can also continue to vape while your D2 is charging. No more having to wait an hour or more to keep vaping, nor do you have to worry about forgetting to bring extra batteries for use throughout the day.


THE HARD COPY:

• FREE Wake and Vape Sock!
• FREE Custom-fit IPV D2 Carbon Fiber Skin!
• FREE Samsung 18650 25r Battery (Green Version)
• Uses Latest YiHi Chip-Set
• Powered by a Single 18650 Battery (Batteries not Included)
• Sliding Ball Bearing Battery Door
• Output Wattage: 7w - 75w
• Output Joules: 5j - 50j
• Standard Atomizer Resistance: 0.2Ω - 3.0Ω
• Joule Atomizer Resistance: 0.05Ω - 0.3Ω
• Temperature Range: 200 - 580°F
• Spring Loaded 510 Atomizer Contact Pin
• 510 Atomizer Connection
• USB Charging Port

WHERE: >> HERE <<

$55.00 
SHIPS FROM THE USA

DROP: THE SMY 50 WATT / TEMP CONTROL BOX MOD - $44.99 + FS

Here is a great deal on the new 50 watt and temperature control box mod by SMY.
Your total cost will be $44.99 + FREE SHIPPING!
 
THE HARD COPY:

• SMY50 TC dual mode(temperature control and variable wattage) box mod
  510 thread connection
  Use single 18650 battery (not included)
  Temperature control range: 200 - 400 centigrade
  Variable wattage 50W max.
  LED screen shows resistance, temperature, wattage and voltage
  Over temperature, anti-reverse protection, short circuit protection, low voltage protection
  Slid cover and damping design

WHERE: >> HERE <<

USE COUPON CODE SMY50W TO BRING THE TOTAL TO $44.99
THIS PRODUCT SHIPS FREE

 

LOCK IT IN: THE VTBOX - EVOLV DNA200 BOX MOD - $120.00 + FS

WHO CALLED IT?

LOCK THIS IN BEFORE THE PRICE CHANGES OR COUPON CODE EXPIRES!

I BOUGHT 3 FOR GIVEAWAYS.
  

With my last post about the $117.00 DNA200 -- We now have another you can get for just $120.00 and free shipping.   China has officially gutted the evolv DNA200 market - which is great for the end consumer.   I love the look of this mod! BRUTAL looking!

THE HARD COPY:

VTBox200 is powered by authentic DNA 200 chip by EVOLV. DNA 200 is a power regulated DC-DC converter with digital switch-mode for personal vaporizers. It features Evolv' s patented wattage control, temperature Protection, preheat, OLED screen, and waterproof onboard buttons. The DNA 200 runs from 3 cell lithium polymer battery, and features cell-by-cell battery monitoring and integrated 1A balance charger. It is the most advanced personal vaporizer.

Main Features:
Authentic DNA 200 chip by EVOLV
Temperature control range from 200-600 Fahrenheit degree
Output wattage from 1-200W
Output voltage from 0.5-9.0V
The lowest resistance: 0.1ohm
Material: T6 senior aviation aluminum, spray paint appearance and corrosion logo
Detachable magnets back cover, convenient to replace battery
Replaceable lithium battery: 1800 mah 11.1 V-35c-60.5A-3s, with tinned copper wire plated copper wire and 14 mm wire size, conductor resistance 15.6 ohm/km, supporting max 55.6 A

** THIS DEAL MAY NOT WORK ON A MOBILE DEVICE - GET ON A COMPUTER! **


WHERE: >> HERE <<
 
USE COUPON CODE vtbox200 TO BRING THE TOTAL TO $120.00
SHIPS FREE!

FROM THE USA: KANGER SUBTANK OCC HEADS - 5 PACK - $8.99

Here is a great deal on replacement head for the Kanger Subtank.  These fit the Kanger Subtank (OG), Kanger Subtank Mini, Kanger Subtank Nano, and the New Subtank Plus series.  Stock up and save!

This Product Features:

• Long life
• Super pure taste
• Newly designed coil
• 0.5 ohm or 1.2 ohm

WHERE: >> HERE <<

$8.99