The
Smok xPro M65 is the upgraded version of the xPro M50 and the power
output has been increased from 50W to 65W. The Passthrough charge while
vaping funtion that the M50 was lacking has been added to the M65. The
M65 will work with low ohm coils down to 0.2ohms. The M65 has a
feature which provides the option to bypass the electronics and operate
as a mechanical mod. The M65 requires an 18650 battery.
THE HARD COPY:
- It is an upgraded version of M50
- 0.8 inch OLED display screen show wattage, voltage, resistant and battery level
- Variable wattage: Can be adjustable from 6.0W to 65W (in 0.1W increment)
- Standard resistant: 0.2-4ohm (+/-0.1ohm tolerance)
- Standby current: <400uA
- Smoking current: <11A (when the coil resistance is 0.2ohm, biggest allowed current >13V)
- Mechanic mode output function: When in Mech mode, you can get a whole wattage output, the biggest vapor
- Over-temperature protection function
- Power automatic reduction function: The power will reduce 5W automatically when the battery can not stand the high power output
- 12s time limited protection
- Low-voltage warning (lower than 3.4V)
- Short circuit and low resistance protection
- Fast increase and reduce power by long press "+""-" button, the speed in proportion to the press time
- Press power button 5 times in two seconds can lock or unlock the screen
- Powered by single 18650 battery (battery sold separately)
- 510 threading connection
- Brass center pin, adjustable
- Micro-USB charging port
WHERE: >> HERE <<
MOBILE USERS CLICK: >> HERE <<
$48.34