TURN YOUR OLD PROTANKS INTO A KANGER AEROTANK - $5.99
Not quite sold on the AeroTank itself yet? Well, now you are able to buy the base and attach it to your ProTank, ProTank II, or ProTank 3 (or get a backup for your AeroTank), and see the difference that having an adjustable air flow base can really have. This base gives you the option to be able to control exactly what kind of hit you want to take from your other Kanger tanks; whether it be a tighter or airier draw. In the past, these options were nonexistent, or took much more work to get the desired results. The base weighs in at approximately .5 oz. The diameter is about .73 inches and it measures about .67 inches tall.
Compatibility
The base fits the Protank 1 and 2 while using single coils heads.
It fits the Protank 3 with dual coils heads.
I bought 5
WHERE: >>> HERE <<<
$5.99
EGG ON THEIR FACE: AND YOU DOUBTED ME? THE DNA30 IS LIVE
Back during Vapercon I broke the story that DNA30 was coming. Many thought I was either lying or just plain wrong. As usual, my sources were right and a lot of people have a massive amount of egg on their face. I was also correct in suggesting that ZEN's new ZNA was going to be using the DNA30. Time to make some omelets boys and girls.
ORIGINAL POST FROM NOV 4TH: CAN BE FOUND HERE
![]() |
| ZNA using THE DNA30 |
THE HARD COPY:
The DNA system lets anyone build Evolv's revolutionary power regulated technology into their own products. The DNA 30D is a power regulated digital switch-mode DC-DC converter for personal vaporizers. It offers controlled power from 7 to 30 watts, runs from a single lithium cell and includes protective features such as overcurrent, over and undervoltage protection and a thermal shutdown. It features a small OLED display, analog or digital user controls, power adjust lock, onboard buttons and synchronous rectification for maximum battery life and minimal heat generation.
The DNA30D is the same size as the DNA20D.
* Order quantities of 1 or 2 DNA30D's will ship immediately. Orders quantities of 3 or more DNA30D's will ship after January 22nd.
Manufacturers please contact us directly for volume orders.
WHERE: >>> HERE <<<
____
UPDATE (6:30PM):
A MOD ENVY WORTHY NOTE: TONIGHT ON NAKED IN THE WOODS - ZEN WILL BE A GUEST WITH CIGARBABE AND GIVE A ZNA w/ THE NEW DNA30 AWAY TO A LUCKY WINNER!
CHECK IT OUT @ 10PM EST - http://www.novabroadcasting.org
BACK IN STOCK: EFEST 30AMP 18650 - 2100mAh - $8.29
![]() |
| Efest 18650 - 30amp - 2100mAh |
The first of the new Efest purple wrap batteries are hitting the market. High amp with high mAh value - the best of both worlds. Perfect for those sub-ohm builds.
THE HARD COPY:
Model: Efest IMR 18650 V3 2100mAh
Size: 18650
Capacity: 2100mAh
Top: Flat top
Weight: 50g
Nominal Capacity: 2100mAh
Nominal Voltage: 3.7v
Discharge temperature range: -10°C—60°C
Charge temperature range: 0°C—40°C
WHERE: >>> HERE <<<
THE DEAL:
USE COUPON CODE 5OFF TO BRING THE TOTAL TO $8.29
QUAD COIL: THE IGO-W3 STYLE DRIPPER - $7.24
| Igo-W Style Rebuildable Atomizer |
Here is a fantastic deal on a IGO-W3 style rebuildable atomizer. These can be set up to run up to 4 coils and have air flow control. For under $8.00 its a great price.
THE HARD COPY:
- Dripping atomizer
- Stainless steel 510 drip tip
- Adjustable airflow
- 5 air holes located on the top cap
- 5-post system
- Chromed brass center pin and internal posts
- Build using silica wick and wire
- Double o-rings on base
- Height without drip tip: 30.9mm (Approx.)
WHERE: >>> HERE <<<
$7.24
ROLLOUT AND BLOWOUT: THE KICK FORCE ADAPTER W/ A KICK - $19.99
| Kick Force Adapter w/ a Kick |
The Force Kick Adapter
The Force is an external power adapter that turns any mechanical mod into a variable wattage device. It performs exactly the same function as The Kick, but instead of placing it directly on top of your battery, it screws into the 510 connection. The top of The Force unscrews to reveal a modified Kick underneath. To adjust your wattage, unscrew the top of The Force, and use a phillips-head screwdriver to turn the dial on top of The Kick. The Force will output any wattage between 5 and 12 watts. The Force has 510 and eGo threading, allowing you to use virtually any style of atomizer. This is perfect for all those mechanical mods that are unable to fit an 18650 with The Kick! With The Force, any mechanical mod with a 510 connection, in any battery configuration, can be turned into a variable wattage device! The Force comes included with a Kick already installed. May The Force be with you!
This will work on all mechanicals and unregulated 3.7v mods (i.e. the bolt, silver bullet, etc).
WHERE: >>> HERE <<<
$19.99
The Force is an external power adapter that turns any mechanical mod into a variable wattage device. It performs exactly the same function as The Kick, but instead of placing it directly on top of your battery, it screws into the 510 connection. The top of The Force unscrews to reveal a modified Kick underneath. To adjust your wattage, unscrew the top of The Force, and use a phillips-head screwdriver to turn the dial on top of The Kick. The Force will output any wattage between 5 and 12 watts. The Force has 510 and eGo threading, allowing you to use virtually any style of atomizer. This is perfect for all those mechanical mods that are unable to fit an 18650 with The Kick! With The Force, any mechanical mod with a 510 connection, in any battery configuration, can be turned into a variable wattage device! The Force comes included with a Kick already installed. May The Force be with you!
This will work on all mechanicals and unregulated 3.7v mods (i.e. the bolt, silver bullet, etc).
WHERE: >>> HERE <<<
$19.99
READY TO SHIP: THE TURTLE SHIP REPLICA MECHANICAL - $29.99
| The Turtle Ship Replica |
One of the most anticipated mechanicals to come in a while.
THE HARD COPY:
The main 18350 tube of the Turtle Ship clone features the signature UVO Korean laser etched engravings on both the front and back side. The Turtle Ship clone is composed of 100% stainless steel and comes with a total of 3 battery tubes to be able to easily change the length of your device and to accommodate an 18350, 18490 or 18650 batteries.
The Turtle Ship clone mod has a brass atomizer contact pin and a brass bottom firing pin for ultimate conductivity. The white delrin ring on the Turtle Ship clone's button allows you to adjust the delrin piece upwards/downwards to eliminate any unwanted battery rattle inside the mod. The Turtle Ship clone features a locking ring to allow the mod from any unwanted firing when placing it in your pocket or setting it down on a table. The Turtle Ship clone has a 510 atomizer connection which will fit most atomizer and is 22mm in diameter.
WHERE: >>> HERE <<<
$29.99
TOP NOTCH: THE 4 BAY LCD BATTERY CHARGER BY EFEST - $28.99
![]() |
| Efest 4 Bay LCD Charger |
I have been using two of these now for over a month.
By far one of the best chargers going - charges your batteries quickly.
Finally the 4 bay version of the LCD battery charger by Efest! The original 2 bay version was a big success but there was a problem - only 2 bays! Your getting the 4 bay version for around the same cost as the original 2 bay version. These charge everything from 10440 to the very large 26650!
THE HARD COPY:
Introducing the brand new Efest 4 Bay LUC Charger.
1. HD mini LCD screen to display precise voltage and battery capacity level.
2. Each charging channel has an independent display of charging status.
3. Automatically adjusts discharge current to charge different size battery.
4. 4 kinds of protection for over-discharging, over-voltage, short-circuit and reverse polarity protection.
5. Automatically stops when battery is fully charged.
6. With DC wide voltage (12-24V) charging mode.
Includes both the power supply and car charger.
WHERE: >>> HERE <<<
$28.99
HOW LOW CAN YA GO: GOLD PLATED PATRIOT REPLICA - $5.73
![]() |
| Gold Plated Patriot Dripper Replica |
Can it get any cheaper?
One of the most attractive replica drippers we've seen, this new one dubbed the "Chi-Triot" was inspired by the popular Patriot Dripper. It's constructed of gold plated brass and features a deep drip well with a three post configuration ideal for thirsty dual coil builds. Holes through the posts and phillips screws mean it's an easy build and won't have you hunting for allen keys. Drip tip is included.
WHERE: >>> HERE <<<
$5.73
AIR FLOW: KANGER AEROTANK + 10ML BOTTLE OF JUICE - $22.49
![]() |
| Kanger AreoTank |
The Kanger Aerotank with Airflow Control offers the same great features and performance as the Kanger Protank – II but with the introduction of a dual coil atomizer head! It also has adjustable airflow control. Turn the dial on the base to increase or decrease airflow to your preference.
Adjustable Airflow Control
Pyrex tank is replaceable
Glue Free: All parts are replaceable
Can be fitted with 510 Drip tip
Replaceable Dual Coil Atomizer Heads
Adjustable Airflow Control
Pyrex tank is replaceable
Glue Free: All parts are replaceable
Can be fitted with 510 Drip tip
Replaceable Dual Coil Atomizer Heads
Pyrex Glass Tank (Same replacement glass as Protank II and 3)
Advertised with a 2.5ml capacity
The Aerotank is 510 Threaded and it will work on 510 thread MOD/APV
Dimensions: 2-3/16"L x 3/4"D (without drip tip)
Box Contents:
1 x Kanger Aerotank with Airflow Control (Pyrex tank, top cap, bottom cap and 510 base)
1 x 510 Drip tip
1 x Ego Cone Cover
2 x Dual Coil Atomizer Heads
Advertised with a 2.5ml capacity
The Aerotank is 510 Threaded and it will work on 510 thread MOD/APV
Dimensions: 2-3/16"L x 3/4"D (without drip tip)
Box Contents:
1 x Kanger Aerotank with Airflow Control (Pyrex tank, top cap, bottom cap and 510 base)
1 x 510 Drip tip
1 x Ego Cone Cover
2 x Dual Coil Atomizer Heads
WHERE: >>> HERE <<<
THE DEAL:
USE COUPON CODE JOE10 TO BRING THE TOTAL TO $22.49
INSTRUCTIONS ON HOW TO GET YOUR FREE 10ML:
On the payment page, below Order Comments, you can enter your favorite flavor and nicotine level from Millenium Potion Juice line.
DRIP DRIP DRIP: THE VORTEX - $7.43
![]() |
| The Vortex RBA |
We've seen a lot of PMMA caps coming out for the drippers lately, but here's an idea this blogger can actually get excited about! The Vortex features stainless steel construction, but with something special: PMMA windows in the steel cap. Where's the airhole? It's in the PMMA, making it ridiculously easy to drill out or even add an additional hole if desired. The positive pin is offset and both connections are thumbscrews for an easy and versatile build. Comes with the drip tip.
WHERE: >>> HERE <<<
$7.43 + FREE SHIPPING
Subscribe to:
Comments (Atom)






