THE MUNSTRO STYLE MECH WITH 4 SHIRTS - $26.57

Here is a great deal on the Munstro style mechanical.   This mechanical uses a copper tube design on the inside for great conductivity but allows you to change its outer apprentice with the use of "shirts".  You get two 18650 and two 18500 shirts.  I really like this design.


THE HARD COPY:

• Copper tube
• Aluminum tube "shirts": 2*18650 "shirts" + 2*18500 "shirts"
• With air channels and 4 air holes on the top cap
• 510 connection
• Chromed copper contacts (adjustable)
• Bottom spring-loaded firing button, with reverse threaded locking ring
• Engraved logo on the "shirts"
• Houses single 18650/18500 battery (batteries sold separately)

WHERE: >> HERE <<

$26.57
 

CLONED: THE VARIANT 250 WATT BOX MOD (260 WATTS)

The evil clone empire has been working overtime..

It doesn't take long does it?  The 250 box mod by Vicious Ant has been cloned and actually does 10 watts higher then the original.  Pre-orders are making the rounds and run about $199-$225.00.  Kinda makes other variable wattage devices seem like an ego battery. 


THE HARD COPY:

• Max watt is 260 Watts
• Variable Wattage
• 8.4 Volt
• 2 LI PO Batteries
• LCD Screen
• 510 threading

Included:

• Batteries and charger included
• Instruction Manual
• USB charging cord
• Gift Box
• Variant 260w Mod Clone

WHERE: >> HERE <<

 

IN STOCK: THE ELEAF ISTICK - $32.99 + FREE SHIPPING

INCLUDES FREE SHIPPING FROM THE USA!

WE ALL LOVE THE ISTICK!  Its ULTRA portable.  Smaller then the original vaporshark - this little mod lasts a long time and packs 20 watts of power. 

I was so impressed I bought 3 more. 

THE HARD COPY:

• 2200mAh Li-Ion Battery
• VV/VW – up to 20W and 3v – 5.5v
• OLED display
• 510-Threads
• Power on/off: Press the button for five times to turn the iStick on and off.
• 10-sec Protection: Maximum of 10 seconds per drag.
• Atomizer Short-Circuit Protection: If atomizer short-circuits, the OLED screen show “Atomizer Short”.
• Low-Voltage Protection: Once the battery is below 3.3V the OLED screen will show “Lock”, which means its time to recharge.
• Unlock the Low-voltage Protection: The iStick begins working again once it reaches 3.65V.
• Low power Alert: If the battery’s power is lower than 10%, the power symbol on the screen will flash.
• Atomizers from 1ohm to 3ohm capable
• Accurate Metering
• Pass-Thru vaping while charging
• Charged via micro usb

WHERE: >> HERE <<

$32.99 + FREE SHIPPING

INNOVATIVE: THE VENTURI KAYFUN STYLED RDA - $13.50

One of the most innovative RDA's that has come to market.  This RDA comes with 3 different top caps, each top cap is unique looking. The innovative part of the RDA is it uses an adjustable chimney design on the inside, airflow on the top of the top cap.  This design allows air from the outside to the inside of the chimney.  This style of airflow allows for incredible flavor!


THE HARD COPY:

- 22mm, Attractive, User Friendly Design
- 304 Stainless Steel
- Customizable with Included 3-Cover "Classic Collection"
- 16mm 3-Post Standard Platform with 1.25mm Lead Holes for Building Ease
- 22k Gold Plated Brass Extended Center Post (Removable and Adjustable) w/ Quad Lead Holes
- Negative Posts Integrated and Reinforced (Not Pressed)
- Ultra-Deep Juice Reservoir / Re-Drip Interval Maximized
- Removable PEEK Insulator
- O-Ring-Less
- Highly Leak-Resistant - Low Maintenance
- Fully Adjustable and Lockable Internal & External Cyclops Airflow Setting. Adjusts Internally via Turning Chimney to Desired Setting, or Externally via Twisting the Drip Tip (while unlocked)
- Exceptional Flavor Production


WHERE: >> HERE <<

$13.50
SHIPS FROM THE USA

FLASH: DNA40 CLONED - $99.00 FOR THE FIRST MOD

Who called it? 

Well it seems the DNA40 with its temperature control has already been replicated. 

Who didn't see this coming? 

The next question is - how long until they incorporate that temperature control technology in much higher wattage chips coming out of China.

A site calling themselves Evkoo is taking pre-orders (now sold out) on a V3 Hana Clone for just $99.00.   Will we see a slew of new CHDNA40 chips by Christmas?  Id have to say so.  I'm sure after this post we will see a ton of new pre-orders popping up for CHDNA40 devices.

Just a year ago the DNA30 made its debut and sold out everywhere.  It was impossible to get a chip or mod.  With DNA40 chips and Hana DNA40 mods in stock since their launch date  ( examples HERE and HERE ) - This does not bode well for what seems to be a struggling DNA40 market.


This was also posted on ECF a few days ago - with a link to the vendor.

Lets use them as the source ;)

WHERE: >> HERE << 

 

AND IT BEGINS: THE ASPIRE ATLANTIS SUB-OHM TANK GOES LIVE

Just a few days after I broke the story on the Atlantis the community has started pushing the new tank by Aspire.   These promise to be amazing.  Using replaceable heads at just .5 ohms.    This deal seems like a reasonable price to me.

THE HARD COPY:

Size: 22mm diameter and 70.3mm height

Tank Material: Pyrex

Base Hardware: Stainless Steel

Available Coils Resistance: 0.5ohms (20-30W variable wattage mod compatible)

Air Holes Size: 2mm, 2.8mm

Coils Makeup:

Panted BVC Technology

Wire for internal coil made in USA

Sub-ohm resistance: 0.5ohms

Compatible with 20-30W mod

WHERE: >> HERE <<

$29.98 + FREE SHIPPING

50 WATTS IN AN ALUMINUM BOX - $54.57

We all know how popular the CHDNA30 box mod was.  It was so popular it single handedly tanked the DNA30 market .  Here is the long awaited upgraded version at a great price.  For LESS then the price of the original CHAN30 box mod, you can get the 50 watt version.  Everything works exactly the same way.

THE HARD COPY:

• 510 threaded connector (adjustable center pin/screw)
• Variable Wattage from 7W-50W in .1 watt increment
• Body is made of 6061 billet aluminum
• OLED display shows battery charge state, volts and ohms
• Powered by single 18650 battery (battery sold separately)
• Micro-USB charging port
• Compatible with 0.3ohm~3.5ohm atomizers
• Input voltage/current: 3.2-4.3V/1.5-15A
• Output voltage/current: 1.5-11V/10A

WHERE: >> HERE <<

$54.57

LET GO MY IGO: AUTHENTIC IGO-W4 - $6.30 FROM THE USA

Here is a fantastic deal from a US vendor.   The IGO-W4 is the upgrade to the original Igo-W / Igo-W2 and is coming in at just $6.30 with FREE shipping!   The simple system allows for a single or dual coil set up.

THE HARD COPY:

The IGO-W4 is a dual coil stainless steel dripping system. It is an updated design to the IGO-W allowing for an easier grip to pull the top cap off. It has a 510 base, two negative posts, and one positive post between both of the negative making it for a relatively easy assembly.


Package included:

1 x IGO-W4 dripping rebuildable atomizer
1 x Resistance Wire for Coil
1 x Fiberglass wick
1 x Extra Screw
1 x Extra Insulation Cap Ring
2 x Extra Black O-Ring


WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $6.30

THREE STYLES: TUGBOAT RDA VERSION 2 REPLICA - $15.95 FREE SHIPPING

Here is a great deal on the version two of the tugboat replica.   This site has three different styles to choose from.   You can order black, matte, and a polished finish.  These ship from the USA and the shipping is FREE!  

A rock solid RDA at a great price!

THE HARD COPY:

• Stainless steel construction
• 22mm outer diameter
• 3 post design
• Copper center pin
• Large drip well
• Flush mounted cap with Tugboat engraving and American Flag engraving
• Large dual adjustable air holes

WHERE: >> HERE <<

$15.95 + FREE SHIPPING

GOT AN EGRIP: NOW GET THE CS REPLACEMENT HEADS

The Egrip is an extremely popular new mod but the heads were impossible to find.  
Now you can get them from a trusted vendor.   These are a bit more expensive then other types of replacement heads but they last a lot longer.

They come in 1.5 ohm

WHERE: >> HERE <<

USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $15.74

WHAT IS AN EGRIP? >> HERE <<