THE TVA SHOW INTERVIEW: THE KINDER GENTLER SIDE OF VAPORJOE??








The softer side of Vaporjoe - Mooch and Freeze talk to me about my life and why I am who I am.   
A really really great interview.   I have marked where the interview starts.

JOIN THEIR GROUP: >> HERE <<


THE SAT22 STYLE REBUILDABLE ATOMIZER - $11.57





There's just something about a well-built genny-style vape. When everything is right, the flavor is great and they produce plenty of vapor. Here's one that's a little different. It's a 22mm atomizer at the base, but the deck and cap are scaled down to provide a smaller air chamber and terrific flavor. Two airholes are vertically aligned on the cap for airflow. Included drip tip is designed to finish the look beautifully. Constructed from stainless steel with glass tank.


THE HARD COPY:
  • SAT 22 atomizer clone
    510 drip tip
    510 Connector,Brass center pin
    Airflow control , 2 vent holes
    3- posts for single and double coil
    Height without drip tip: 42mm

WHERE: >> HERE <<

$11.57
 

GET WIRED: 16 TO 34 GAUGE KANTHAL WIRE - 25 TO 1000 FEET





OVER 21,000 UNITS SOLD!  
WHY BUY YOUR WIRE ANYWHERE ELSE??

Here it is.  Your one stop shop for gauges and lengths of the most popular gauge wire.   This merchant has been promoted by me time and time again for their great service.  Time to load up at great prices.


THE HARD COPY:


Ships with Tracking within 1 business day!
  • Heat Resistant up to 1400-1500 degrees Celsius
  • Check Pictures for resistance chart for each gauge
  • Shape: Round
  • Requires Oxidizing

WHERE:  >> HERE <<


CRYSTAL MENTH: BUY IN BULK - 4OZ - $10.20 - FREE SHIPPING

HEHEHEH GOTCHA!

http://bit.ly/1oaDG0v


Here is a great deal on pure crystallized menthol.    For those looking to make straight menthol eliquid or just want to add some to existing juice - this is what your going to need.   Every DIY juice maker should have some crystals on hand.

Making menthol exact is super simple.  I make a 25/75 mix.   Just crush the crystals to about 25% of the total bottle size and fill the rest with PG.  You can wait for the crystals to dissolve or you can put the bottle in some hot water to speed the process.  You will have a SUPER concentrated bottle of menthol.  Just add a few drops to your juice to taste.

4oz of menthol crystals in enough to last the average vaper 2 life times!

Pure crystallized menthol can be used a many other medicinal applications too.

Menthol crystals can be used to alleviate nausea, especially when the nausea is due to motion sickness.  This is because peppermint (which is used in making menthol crystals) is a natural carminative herb, meaning it can settle the digestive system.

Because menthol crystals have antipruritic and anti irritant qualities, they are great for anti itch creams and balms.

When it comes to chest congestion and upper respiratory issues; menthol can work as a decongestant.  The uses in this category for menthol crystals include: rubs, balms, or salves.  Inhaling the minty aroma of these crystals will also help to alleviate the blockages.


I wouldn't advise eating these unless you want to clear out every pore in your face.  
However, I have played jokes and asked people if they wanted to try the best rock candy ever! ;)


WHERE: >> HERE <<

$10.20 FREE SHIPPING



LOWER: THE BIG DRIPPER - AUTO RDA - HOLDS 5ML - $15.33






Here is a great deal on the "THE BIG DRIPPER" style RDA.  
This is an auto dripping RDA that holds up to 5ml of juice.

THE HARD COPY:
  • The top can hold up to 5ml of juice. 
  • By pressing down on the base of the drip tip the RDA gets juice dripped onto it by the tank. 
  • A reduced chamber helps amplifies the flavor. 
  • The airflow holes are large enough to satisfy the cloud chasers. 
  • Grub machine screws in the posts, with huge holes for low gauge builds. 
  • Precision machined and well-fitted.

SPECS:

Juice Well: 3mm
Contact Material: Copper
Post Holes: Large for massive builds
Airflow Control: Dual Cyclops/Adjustable Airflow
Tank Capacity: 5ml
Push-activated dripping function
Reduced chamber
High temperature resistant PEEK insulator
Cup point screws to reduce chance of wire breaks 



WHERE: >> HERE <<

$15.33

 

DROP: THE IPV3 - 150 WATT BOX MOD - $119.95 - FREE SHIPPING





http://bit.ly/1sbhRoH


The IPV3 the newest box mod from Pioneer4you.   This variable wattage behemoth maxes out at a whopping 150 watts.  Its predecessor, the IPV2, was a great box mod - so we should expect another great device. We have been saying for a few months now that the box mod is the "new baby" of the industry and this mod is a prime example.  

It's simple - you can do a lot more with a box then you can with a tube.

This is the lowest price on the IPV3 I have seen.  Jump on it while you can.

Available in both black and silver.


THE HARD COPY:

- Output Power:10~150 watts
- Resistance: 0.15~2 Ω
- Output Voltage: 1~7 volts
- Input Voltage: 3.2~9 volts
- Dual 18650 Battery
- OLED Screen
- Water Resistant
- Upgradeable Firmware

- SX330 V3S Chip


WHERE: >> HERE <<

$119.95 + FREE SHIPPING


THE 100 WATT Gi2 REPLICA GOES LIVE



http://goo.gl/liFUHk


One of the most innovative mods ever.  I remember talking to the mod maker almost a year ago.  Even after a year has passed no mods come close to what this piece of tech can do.

They are calling this a clone, however - its not clear if they gave up the technology to China for mass production.  One thing we do know is they had a lot of problems filling orders in the beginning - something China can help fix.

These ARE expensive, and for good reason.  


THE HARD COPY:
  • 510 threading connector (floating brass 510 center pin)
  • Four control buttons: Button 1-SMOKING, button 2-MENU, button 3-MINUS, button 4-PLUS
  • 1.77 inch TFT LCD display screen showing output voltage, output wattage, resistance, battery voltage, current, locking mode, setting parameters, the value of the parameters of the system, product ID, microSD card, etc
  • Variable wattage - can be adjustable from 1.0W to 100.0W (in 0.1W increments)
  • Variable voltage - can be adjustable from 1.0V to 5.5V (in 0.1V increments)
  • Input capacity range: 180-360W
  • Resistance range: 0.1-4.0ohm
  • Input voltage range: 6.0-8.4V
  • Input current range: 30-60A
  • Output current range: 0-20A
  • Time range for one inhaling of smoke: 3-10s
  • Short-circuit and reserve polarity protection
  • Over-voltage and low-voltage protection
  • Overheating protection
  • Built-in micro-SD card
  • With battery lock mode
  • Powered by 2*18650 batteries (batteries sold separately)

WHERE: >> HERE <<

Comes in 3 different colors via the Drop Down menu.
  

MONSTER MANHATTAN: THE 26650 STYLE LANDS - $29.06


http://goo.gl/fNwDTZ


Considering there was never a 26650 version of this mod, is this technically a clone? 
I would have to say no.  Regardless -- its a copper BEAST!   A full 31.5mm!


THE HARD COPY:
  • 510 threading connection
  • Copper contacts
  • Bottom magnetic firing button, without lock
  • Laser engraved logo
  • Houses single 26650 battery (battery sold separately)
  • Internal diameter: 26.7mm
  • Outside diameter: 31.5mm

WHERE: >> HERE <<

$29.06


LIQUIDATION: TUGBOAT STYLE RDA - $8.99 (USA SHIPPED)



http://101vape.com/home/345-tugboat-rda-clone.html#oid=1003_219


An epic in stock deal from the USA!

The Tugboat is one of my favorite RBA's.   I have legit versions and they are FANTASTIC!

This is a clone of the Tug Boat RDA.  If you know the authentic Tug Boat you know it hits like a freight train. This will be a 1:1 clone of the authentic and being offered at a much deeper discount! Check out the different finishes that we have ordered! Here are the specs for the Tug Boat RDA clone:


THE HARD COPY:

  • Comes with stainless steel drip tip with delrin base
  • Matching serial number on drip tip and atty
  • 304 stainless steel
  • Tripost
  • Extra deep juice well
  • Reduced chamber
  • 2 Pre-drilled holes 3/32
  • Laser etched engraving

WHERE: >> HERE <<

$8.99


OCTOCOILS: THE IGO-W3 RDA - $11.74 (USA SHIPPED)




IGO-W3 Avialable at Venerable Vaping
IGO-W3 BY YOUDE


The IGO-W3 is purpose built for your exotic coil builds.   This rebuildable atomizer sports 4 posts so you can have a 1 to 8 coil set up!   Test your rebuilding skills with something over the top!


THE HARD COPY:
  • Drip Atomizer
  • Sealed battery connector
  • Multiple Holes on casing and drip well for adjustable airflow
  • 510 Threaded
  • Phillips head screws for positive/negative post
  • 4 post for 1-8 Coil configuration
  • Rebuild using fiberglass or silica rope and wire
  • Stainless steel body and base
  • Fits most 510 drip tips
  • Wick and wire sold separately

WHERE: >>> HERE <<< 
  
THE DEAL:
USE COUPON CODE YEAHBABY TO BRING THE TOTAL TO $11.74